On Sat, Mar 7, 2020 at 9:14 AM Terry Hunt <
terry@mylakeroyale.com> wrote:
>
> I have several radios that I program using CHIRP, running Linux the manufacture software isn't usually compatible., so thank you to everyone that works so hard to make CHIRP a success. I have an 8900D that seems to program perfectly with one exception.
This radio has four monitor slots on the front panel. When programming, the first two work great, number 3 and 4 however do not. Some settings like choosing the channel or frequency mode do work, but setting a default channel on them do not, they always
come up to channel 0 after the restart. Does anyone else have this issue?
>
> Thanks,
> Terry
Hi Terry,
This is a bug in the hardware that has been present since the first
units began shipping in 2017.
Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7C%7C397a2a549e414369b14308d7c2aced1f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637191920273250313&sdata=TRsyr%2F1fJcVsyO0EAYRzlgYsFBblA4%2F8IVv9lb7oV5Q%3D&reserved=0
This message was sent to Terry at
terry@mylakeroyale.com
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com