[chirp_users] unknown radio
can you tell me what radio settings if any I can use to program the RTS systems ( Bosvark ). I did get a software DV3400R but with this software all alteration must be done by
hand. You can't cut, copy ,paste, export or import. Tlis program file save as a .dat but it does not seem to be compatable with Chirp because I do not know as to what radio I can use to open the file. please give me a answer.
thanking you
Hennie
On Thu, Aug 6, 2020 at 12:30 PM Hennie du Plessis henniedp@webmail.co.za wrote:
can you tell me what radio settings if any I can use to program the RTS systems ( Bosvark ). I did get a software DV3400R but with this software all alteration must be done by
hand. You can't cut, copy ,paste, export or import. Tlis program file save as a .dat but it does not seem to be compatable with Chirp because I do not know as to what radio I can use to open the file. please give me a answer.
thanking you
Hennie
The RTS DV3400R does not appear to be a CHIRP supported radio model.
Jim KC9HI
It's advertised as a PMR446 radio so it should come already programmed.
On 06 August 2020 at 12:27 Hennie du Plessis henniedp@webmail.co.za wrote:
can you tell me what radio settings if any I can use to program the RTS systems ( Bosvark ). I did get a software DV3400R but with this software all alteration must be done by
hand. You can't cut, copy ,paste, export or import. Tlis program file save as a .dat but it does not seem to be compatable with Chirp because I do not know as to what radio I can use to open the file. please give me a answer.
thanking you
Hennie
-- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
Where is the RTS DV-3400 Bosvark advertised as a PMR446 radio?
Product page here:
https://www.repeater.co.za/rts-two-way-radios/
Brochure here:
https://www.repeater.co.za/wp-content/uploads/2019/06/18.pdf
Manual here:
https://www.repeater.co.za/wp-content/uploads/2019/06/21.pdf
Looks like a typical 5W UHF analog HT, 128 channels, 12.5/25KHz spacing, even shows U.S. FCC-style emission designators in the manual (Technical Specifications in English start on page 30).
On 8/6/2020 10:30 AM, Nigel A. Gunn G8IFF/W8IFF wrote:
It's advertised as a PMR446 radio so it should come already programmed.
On 06 August 2020 at 12:27 Hennie du Plessishenniedp@webmail.co.za wrote:
can you tell me what radio settings if any I can use to program the RTS systems ( Bosvark ). I did get a software DV3400R but with this software all alteration must be done by
hand. You can't cut, copy ,paste, export or import. Tlis program file save as a .dat but it does not seem to be compatable with Chirp because I do not know as to what radio I can use to open the file. please give me a answer.
thanking you
Hennie
https://www.allradio.co.za/rts-dv-3400-license-free-two-way-radio-bosvark/
On 07 August 2020 at 11:02 Peter ptlambert@sbcglobal.net wrote:
Where is the RTS DV-3400 Bosvark advertised as a PMR446 radio?
Product page here:
https://www.repeater.co.za/rts-two-way-radios/
Brochure here:
https://www.repeater.co.za/wp-content/uploads/2019/06/18.pdf
Manual here:
https://www.repeater.co.za/wp-content/uploads/2019/06/21.pdf
Looks like a typical 5W UHF analog HT, 128 channels, 12.5/25KHz spacing, even shows U.S. FCC-style emission designators in the manual (Technical Specifications in English start on page 30).
On 8/6/2020 10:30 AM, Nigel A. Gunn G8IFF/W8IFF wrote:
It's advertised as a PMR446 radio so it should come already programmed.
On 06 August 2020 at 12:27 Hennie du Plessishenniedp@webmail.co.za wrote:
can you tell me what radio settings if any I can use to program the RTS systems ( Bosvark ). I did get a software DV3400R but with this software all alteration must be done by
hand. You can't cut, copy ,paste, export or import. Tlis program file save as a .dat but it does not seem to be compatable with Chirp because I do not know as to what radio I can use to open the file. please give me a answer.
thanking you
Hennie
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
participants (4)
-
Hennie du Plessis -
Jim Unroe -
Nigel A. Gunn G8IFF/W8IFF -
Peter