http:///rtsystemsinc.com They are looking into what products they might be able to offer the DMR community but it is in the investigative stage. You're best bet for DMR support is a state support organization if your state has one. Some states are doing a better job than others. Other than that another good source is your local DMR community.
73, Gary - W6GVS Dowagiac, MI
At 12:32 PM 8/29/2017, you wrote:
Content-Type: multipart/alternative; boundary="----=_NextPart_000_03AF_01D320BA.7BC4D760" Content-Language: en-us
If Chirp does not support DMR such as Retevis RT82, do you know who might.? I tried RT Systems with no success. I cannot even find a link to contact them.
KG5UBQ Dan
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Wednesday, August 23, 2017 4:47 AM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Retevis RT82
On Tue, Aug 22, 2017 at 9:48 PM, <mailto:kg5ubq@gmail.comkg5ubq@gmail.com> wrote:
Looking for Chirp for Retevis RT82, however I am unable to locate. Has any of worked through that or are you aware of similar radio chirp that may work?
To the best of my knowledge, CHIRP does not support any DMR radios.
Jim KC9HI _______________________________________________ chirp_users mailing list mailto:chirp_users@intrepid.danplanet.comchirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Smitley at mailto:kg5ubq@gmail.comkg5ubq@gmail.com To unsubscribe, send an email to mailto:chirp_users-unsubscribe@intrepid.danplanet.comchirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Gary Smith at gvsmith5@frontier.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I sure wish I knew more about what needs to be done, with the MD-380's being sold in dumpsters (sure seems like it) and the RT82 being all over the place too, both of them use the same programming. sure would be nice not to have to run the programming software in windows to then go to linux to us md380 tools to load and work with the radios. If Chirp could create the files it would be great.
I guess the question is who do we send a radio to that can take a whack at it?
On Tue, Aug 29, 2017 at 11:49 AM, Gary V. Smith gvsmith5@frontier.com wrote:
rtsystemsinc.com http:/// They are looking into what products they might be able to offer the DMR community but it is in the investigative stage. You're best bet for DMR support is a state support organization if your state has one. Some states are doing a better job than others. Other than that another good source is your local DMR community.
73, Gary - W6GVS Dowagiac, MI
At 12:32 PM 8/29/2017, you wrote:
Content-Type: multipart/alternative; boundary="----=_NextPart_000_03AF_01D320BA.7BC4D760" Content-Language: en-us
If Chirp does not support DMR such as Retevis RT82, do you know who might.? I tried RT Systems with no success. I cannot even find a link to contact them.
KG5UBQ Dan
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Wednesday, August 23, 2017 4:47 AM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Retevis RT82
On Tue, Aug 22, 2017 at 9:48 PM, kg5ubq@gmail.com wrote:
Looking for Chirp for Retevis RT82, however I am unable to locate. Has any of worked through that or are you aware of similar radio chirp that may work?
To the best of my knowledge, CHIRP does not support any DMR radios.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Smitley at kg5ubq@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Gary Smith at gvsmith5@frontier.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
You can easily download codeplugs for DMR radios. There is no need for Chirp and you generally do not need to pay for the software. The code plugs include software to load or read the radio. If you have used any of these, you would note that they are extremely complex in their configurations. I am not sure the RT82 is well supported but the MD-380/390 have lots of support.
73,
Alan – W6ARH
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Chuck Hast Sent: Tuesday, August 29, 2017 12:15 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Retevis RT82
I sure wish I knew more about what needs to be done, with the
MD-380's being sold in dumpsters (sure seems like it) and the RT82
being all over the place too, both of them use the same programming.
sure would be nice not to have to run the programming software in
windows to then go to linux to us md380 tools to load and work with
the radios. If Chirp could create the files it would be great.
I guess the question is who do we send a radio to that can take
a whack at it?
On Tue, Aug 29, 2017 at 11:49 AM, Gary V. Smith gvsmith5@frontier.com wrote:
rtsystemsinc.com http:// They are looking into what products they might be able to offer the DMR community but it is in the investigative stage. You're best bet for DMR support is a state support organization if your state has one. Some states are doing a better job than others. Other than that another good source is your local DMR community.
73, Gary - W6GVS Dowagiac, MI
At 12:32 PM 8/29/2017, you wrote:
Content-Type: multipart/alternative; boundary="----=_NextPart_000_03AF_01D320BA.7BC4D760" Content-Language: en-us
If Chirp does not support DMR such as Retevis RT82, do you know who might.? I tried RT Systems with no success. I cannot even find a link to contact them.
KG5UBQ Dan
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com mailto:chirp_users-bounces@intrepid.danplanet.com ] On Behalf Of Jim Unroe Sent: Wednesday, August 23, 2017 4:47 AM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Retevis RT82
On Tue, Aug 22, 2017 at 9:48 PM, kg5ubq@gmail.com wrote:
Looking for Chirp for Retevis RT82, however I am unable to locate. Has any of worked through that or are you aware of similar radio chirp that may work?
To the best of my knowledge, CHIRP does not support any DMR radios.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Smitley at kg5ubq@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Gary Smith at gvsmith5@frontier.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Tue, Aug 29, 2017 at 12:15 PM, Chuck Hast kp4djt@gmail.com wrote:
I sure wish I knew more about what needs to be done, with the MD-380's being sold in dumpsters (sure seems like it) and the RT82 being all over the place too, both of them use the same programming. sure would be nice not to have to run the programming software in windows to then go to linux to us md380 tools to load and work with the radios. If Chirp could create the files it would be great.
I guess the question is who do we send a radio to that can take a whack at it?
Chuck,
If you'd like to pick up development, I would start here: http://chirp.danplanet.com/issues/3755 http://intrepid.danplanet.com/pipermail/chirp_devel/2016-September/004240.ht...
The major item required to support DMR radios is adding a talkgroup editor to the GUI. Once Chirp has a generic way to edit all the data required to program a DMR radio, adding individual radios becomes much simpler.
Tom KD7LXL
Chuck, FYI: No need to go to Linux to update a 380 with tools. Take a look at http://www.miklor.com/DMR/DMR-380-Toolz.php
Strictly Windows based. John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Chuck Hast Sent: Tuesday, August 29, 2017 3:15 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Retevis RT82
I sure wish I knew more about what needs to be done, with the
MD-380's being sold in dumpsters (sure seems like it) and the RT82
being all over the place too, both of them use the same programming.
sure would be nice not to have to run the programming software in
windows to then go to linux to us md380 tools to load and work with
the radios. If Chirp could create the files it would be great.
I guess the question is who do we send a radio to that can take
a whack at it?
On Tue, Aug 29, 2017 at 11:49 AM, Gary V. Smith gvsmith5@frontier.com wrote:
rtsystemsinc.com http:// They are looking into what products they might be able to offer the DMR community but it is in the investigative stage. You're best bet for DMR support is a state support organization if your state has one. Some states are doing a better job than others. Other than that another good source is your local DMR community.
73, Gary - W6GVS Dowagiac, MI
At 12:32 PM 8/29/2017, you wrote:
Content-Type: multipart/alternative; boundary="----=_NextPart_000_03AF_01D320BA.7BC4D760" Content-Language: en-us
If Chirp does not support DMR such as Retevis RT82, do you know who might.? I tried RT Systems with no success. I cannot even find a link to contact them.
KG5UBQ Dan
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com mailto:chirp_users-bounces@intrepid.danplanet.com ] On Behalf Of Jim Unroe Sent: Wednesday, August 23, 2017 4:47 AM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Retevis RT82
On Tue, Aug 22, 2017 at 9:48 PM, kg5ubq@gmail.com wrote:
Looking for Chirp for Retevis RT82, however I am unable to locate. Has any of worked through that or are you aware of similar radio chirp that may work?
To the best of my knowledge, CHIRP does not support any DMR radios.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Smitley at kg5ubq@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Gary Smith at gvsmith5@frontier.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I do NOT run windows. Sorry, that is not a OS that I want on my machines. Especially 10 which appears to "leak" data to MS. Google "windows 10 calling home" or some variant thereof.
I have the DMR tools which run natively on Linux that is what I use to upload the code plugs, but I would like to be able to modify them without having to resort to something windows based. At this time I run the MD-380 software under wine, but would rather have Chirp handle it.
Tom, I will take a look at it and see what I can do. Perhaps I can get some local help here in the OKC area, and we can get some- thing done. I am not a coder but since moving to OKC, I have found some people that might be able to help me.
On Tue, Aug 29, 2017 at 9:04 PM, John La Johnla@usa.net wrote:
Chuck, FYI: No need to go to Linux to update a 380 with tools. Take a look at http://www.miklor.com/DMR/DMR-380-Toolz.php
Strictly Windows based. John
*From:* chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Chuck Hast *Sent:* Tuesday, August 29, 2017 3:15 PM *To:* Discussion of CHIRP
*Subject:* Re: [chirp_users] Retevis RT82
I sure wish I knew more about what needs to be done, with the
MD-380's being sold in dumpsters (sure seems like it) and the RT82
being all over the place too, both of them use the same programming.
sure would be nice not to have to run the programming software in
windows to then go to linux to us md380 tools to load and work with
the radios. If Chirp could create the files it would be great.
I guess the question is who do we send a radio to that can take
a whack at it?
On Tue, Aug 29, 2017 at 11:49 AM, Gary V. Smith gvsmith5@frontier.com wrote:
rtsystemsinc.com They are looking into what products they might be able to offer the DMR community but it is in the investigative stage. You're best bet for DMR support is a state support organization if your state has one. Some states are doing a better job than others. Other than that another good source is your local DMR community.
73, Gary - W6GVS Dowagiac, MI
At 12:32 PM 8/29/2017, you wrote:
Content-Type: multipart/alternative; boundary="----=_NextPart_000_03AF_01D320BA.7BC4D760" Content-Language: en-us
If Chirp does not support DMR such as Retevis RT82, do you know who might.? I tried RT Systems with no success. I cannot even find a link to contact them.
KG5UBQ Dan
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Wednesday, August 23, 2017 4:47 AM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Retevis RT82
On Tue, Aug 22, 2017 at 9:48 PM, kg5ubq@gmail.com wrote:
Looking for Chirp for Retevis RT82, however I am unable to locate. Has any of worked through that or are you aware of similar radio chirp that may work?
To the best of my knowledge, CHIRP does not support any DMR radios.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Smitley at kg5ubq@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Gary Smith at gvsmith5@frontier.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
participants (5)
-
Chuck Hast -
Gary V. Smith -
John La -
Silverfox -
Tom Hayward