You can easily download codeplugs for DMR radios. There is no need for Chirp and you generally do not need to pay for the software. The code plugs include software to load or read the radio. If you have used any of these, you would note that they are extremely complex in their configurations. I am not sure the RT82 is well supported but the MD-380/390 have lots of support.
73,
Alan – W6ARH
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Chuck Hast
Sent: Tuesday, August 29, 2017 12:15 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Retevis RT82
I sure wish I knew more about what needs to be done, with the
MD-380's being sold in dumpsters (sure seems like it) and the RT82
being all over the place too, both of them use the same programming.
sure would be nice not to have to run the programming software in
windows to then go to linux to us md380 tools to load and work with
the radios. If Chirp could create the files it would be great.
I guess the question is who do we send a radio to that can take
a whack at it?
On Tue, Aug 29, 2017 at 11:49 AM, Gary V. Smith <gvsmith5@frontier.com> wrote:
rtsystemsinc.com They are looking into what products they might be able to offer the DMR community but it is in the investigative stage. You're best bet for DMR support is a state support organization if your state has one. Some states are doing a better job than others. Other than that another good source is your local DMR community.
73,
Gary - W6GVS
Dowagiac, MI
At 12:32 PM 8/29/2017, you wrote:
Content-Type: multipart/alternative;
boundary="----=_NextPart_000_03AF_01D320BA.7BC4D760"
Content-Language: en-us
If Chirp does not support DMR such as Retevis RT82, do you know who might.? I tried RT Systems with no success. I cannot even find a link to contact them.
KG5UBQ
Dan
-----Original Message-----
From: chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Wednesday, August 23, 2017 4:47 AM
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Subject: Re: [chirp_users] Retevis RT82
On Tue, Aug 22, 2017 at 9:48 PM, <kg5ubq@gmail.com> wrote:
> Looking for Chirp for Retevis RT82, however I am unable to locate. Has
> any of worked through that or are you aware of similar radio chirp
> that may work?
To the best of my knowledge, CHIRP does not support any DMR radios.
Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dan Smitley at kg5ubq@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Gary Smith at gvsmith5@frontier.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck Hast at kp4djt@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com