[chirp_users] Problems with Windows 8.1
Ok, the Win_Driver_Prolific_3_2_0_0 with a FTDI chip cable and Chirp (or UV-3R tranceiver software), all work great on my XP and W7 machines.
Installing the same driver and cable on my W8.1 Laptop produces the following error:
This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.
Any suggestions on how to solve the W8.1 problems? Does W8.1 require a special driver? cable?
Thanks, Mike K5HUM@ARRL.NET
On Tue, Jul 21, 2015 at 10:02 PM, Mike Raymond K5HUM@arrl.net wrote:
Ok, the Win_Driver_Prolific_3_2_0_0 with a FTDI chip cable and Chirp (or UV-3R tranceiver software), all work great on my XP and W7 machines.
Installing the same driver and cable on my W8.1 Laptop produces the following error:
This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.
Any suggestions on how to solve the W8.1 problems? Does W8.1 require a special driver? cable?
Thanks, Mike K5HUM@ARRL.NET
Mike,
You don't use a Prolific driver with an FTDI chip.
Jim KC9HI
Ok, Im confused, The setup I mentioned works fine on my XP and W7 machines why would it not work on W8.1???
73, Mike
On Tue, Jul 21, 2015 at 9:26 PM, Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Jul 21, 2015 at 10:02 PM, Mike Raymond K5HUM@arrl.net wrote:
Ok, the Win_Driver_Prolific_3_2_0_0 with a FTDI chip cable and Chirp (or UV-3R tranceiver software), all work great on my XP and W7 machines.
Installing the same driver and cable on my W8.1 Laptop produces the following error:
This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete
the
specified operation.
Any suggestions on how to solve the W8.1 problems? Does W8.1 require a special driver? cable?
Thanks, Mike K5HUM@ARRL.NET
Mike,
You don't use a Prolific driver with an FTDI chip.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Are you running as Admin? I have had other programs not work unless you were.
Jardy Dawson WA7JRD Nobody really cares what device you are using, as long as YOU like it!
On Jul 21, 2015, at 19:54, Mike Raymond K5HUM@ARRL.NET wrote:
Ok, Im confused, The setup I mentioned works fine on my XP and W7 machines why would it not work on W8.1???
73, Mike
On Tue, Jul 21, 2015 at 9:26 PM, Jim Unroe rock.unroe@gmail.com wrote: On Tue, Jul 21, 2015 at 10:02 PM, Mike Raymond K5HUM@arrl.net wrote:
Ok, the Win_Driver_Prolific_3_2_0_0 with a FTDI chip cable and Chirp (or UV-3R tranceiver software), all work great on my XP and W7 machines.
Installing the same driver and cable on my W8.1 Laptop produces the following error:
This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.
Any suggestions on how to solve the W8.1 problems? Does W8.1 require a special driver? cable?
Thanks, Mike K5HUM@ARRL.NET
Mike,
You don't use a Prolific driver with an FTDI chip.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Tue, Jul 21, 2015 at 10:54 PM, Mike Raymond K5HUM@arrl.net wrote:
Ok, Im confused, The setup I mentioned works fine on my XP and W7 machines why would it not work on W8.1???
73, Mike
Mike,
Visit this page: http://www.miklor.com/COM/UV_Drivers.php
Scroll down to step 12. When the programming cable is plugged in, you should see and entry similar to the 2nd image above step 12.
If it ishows Prolific, then you must have the Prolific v3.2.0.0 driver installed as shown in the image above step 12. Follow the instructions to install and then select (as shown in steps 7 through 11) the v3.2.0.0 driver.
If is shows an FTDI chip, then the correct driver should have installed automatically. You might try uninstalling the driver using Device Manager and allowing Windows to install it again. Or you could download the latest driver from the FTDI website and install it that way. http://www.ftdichip.com/Drivers/D2XX.htm
Jim KC9HI
Hi Jim,
Thanks for the kind efforts but still No Joy :( Maybe I need to give it a rest for a while hihi
TallyHo Mike
On Wed, Jul 22, 2015 at 5:25 AM, Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Jul 21, 2015 at 10:54 PM, Mike Raymond K5HUM@arrl.net wrote:
Ok, Im confused, The setup I mentioned works fine on my XP and W7 machines why would it not work on W8.1???
73, Mike
Mike,
Visit this page: http://www.miklor.com/COM/UV_Drivers.php
Scroll down to step 12. When the programming cable is plugged in, you should see and entry similar to the 2nd image above step 12.
If it ishows Prolific, then you must have the Prolific v3.2.0.0 driver installed as shown in the image above step 12. Follow the instructions to install and then select (as shown in steps 7 through 11) the v3.2.0.0 driver.
If is shows an FTDI chip, then the correct driver should have installed automatically. You might try uninstalling the driver using Device Manager and allowing Windows to install it again. Or you could download the latest driver from the FTDI website and install it that way. http://www.ftdichip.com/Drivers/D2XX.htm
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Wed, Jul 22, 2015 at 8:52 AM, Mike Raymond K5HUM@arrl.net wrote:
Hi Jim,
Thanks for the kind efforts but still No Joy :( Maybe I need to give it a rest for a while hihi
TallyHo Mike
It doesn't help us help you when you just say "no joy". What driver is device manager showing you have? How about attaching a screen capture of the driver tab of the programming cable?
Jim KC9HI
Jim,
I was not trying to be cute, just frustrated. I did not just fall off the turnip truck and have been around Windows quite a few years.
The driver is a Win_Driver_Prolific_3_2_0_0. The error being reported is:
"This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation."
The SAME driver and USB to serial cable work fine on my 64b W7 machine just not on my W8.1 64b Dell D630.....which accounts for my frustration. Im not sure what other info I can provide thats relevant but I would like to solve the problem.
73 Mike K5HUM
On Wed, Jul 22, 2015 at 4:03 PM, Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jul 22, 2015 at 8:52 AM, Mike Raymond K5HUM@arrl.net wrote:
Hi Jim,
Thanks for the kind efforts but still No Joy :( Maybe I need to give it a rest for a while hihi
TallyHo Mike
It doesn't help us help you when you just say "no joy". What driver is device manager showing you have? How about attaching a screen capture of the driver tab of the programming cable?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Open Device Manager Remove Old Com ports and USB devices: Proceed to step 2 of this tutorial. When that is done, still in Device manager, navigate to your problem USB cable (it should have a yellow exclamation mark on it) Remove it, and then reinstall the driver If that driver will still not work then: Right click on it, and choose update driver. Click Browse my Computer... Click Let me pick from a list... A list of all of the drivers should show. Choose the oldest Prolific driver on the list. I chose version 3.2.0 from 2007 Install it, and you're done! If you are using PuTTy, note that when you connect, the COM port may not work as expected. What you should do, if you need to, is go into the Serial options in the main PuTTy window, and turn off flow control.
Everything should work right now.
Mats
On Jul 22, 2015, at 3:12 PM, Mike Raymond K5HUM@ARRL.NET wrote:
Jim,
I was not trying to be cute, just frustrated. I did not just fall off the turnip truck and have been around Windows quite a few years.
The driver is a Win_Driver_Prolific_3_2_0_0. The error being reported is:
"This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation."
The SAME driver and USB to serial cable work fine on my 64b W7 machine just not on my W8.1 64b Dell D630.....which accounts for my frustration. Im not sure what other info I can provide thats relevant but I would like to solve the problem.
73 Mike K5HUM
On Wed, Jul 22, 2015 at 4:03 PM, Jim Unroe rock.unroe@gmail.com wrote: On Wed, Jul 22, 2015 at 8:52 AM, Mike Raymond K5HUM@arrl.net wrote:
Hi Jim,
Thanks for the kind efforts but still No Joy :( Maybe I need to give it a rest for a while hihi
TallyHo Mike
It doesn't help us help you when you just say "no joy". What driver is device manager showing you have? How about attaching a screen capture of the driver tab of the programming cable?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Still does not work. To check, I uninstalled the Prolific 3_2_0_0 driver on my good W7 machine, followed your instructions, re installed, and everything worked fine.
I then used the SAME procedures and driver on the W8.1 machine and got the same dang error. Im sure its something specific to W8.1 or my Dell 630 Laptop, but its still eluding me.
Since I can program with Chirp on my UV-3R and W7 machine, I will leave it with that. Thanks for trying.
73, Mike
On Wed, Jul 22, 2015 at 5:51 PM, mats.g.roos@gmail.com < mats.g.roos@gmail.com> wrote:
- Open Device Manager
- Remove Old Com ports and USB devices: Proceed to step 2 of this
tutorial http://www.digi.com/support/kbase/kbaseresultdetl?id=3308. 3. When that is done, still in Device manager, navigate to your problem USB cable (it should have a yellow exclamation mark on it) 4. Remove it, and then reinstall the driver 5. If that driver will still not work then: 6. Right click on it, and choose *update driver*. 7. Click *Browse my Computer...* 8. Click *Let me pick from a list...* 9. A list of all of the drivers should show. Choose the oldest Prolific driver on the list. I chose version 3.2.0 from 2007 10. Install it, and you're done!
If you are using PuTTy, note that when you connect, the COM port may not work as expected. What you should do, if you need to, is go into the Serial options in the main PuTTy window, and turn off flow control.
Everything should work right now[?].
Mats
On Jul 22, 2015, at 3:12 PM, Mike Raymond K5HUM@ARRL.NET wrote:
Jim,
I was not trying to be cute, just frustrated. I did not just fall off the turnip truck and have been around Windows quite a few years.
The driver is a Win_Driver_Prolific_3_2_0_0. The error being reported is:
"This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation."
The SAME driver and USB to serial cable work fine on my 64b W7 machine just not on my W8.1 64b Dell D630.....which accounts for my frustration. Im not sure what other info I can provide thats relevant but I would like to solve the problem.
73 Mike K5HUM
On Wed, Jul 22, 2015 at 4:03 PM, Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jul 22, 2015 at 8:52 AM, Mike Raymond K5HUM@arrl.net wrote:
Hi Jim,
Thanks for the kind efforts but still No Joy :( Maybe I need to give it a rest for a while hihi
TallyHo Mike
It doesn't help us help you when you just say "no joy". What driver is device manager showing you have? How about attaching a screen capture of the driver tab of the programming cable?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Are you running this as Administrator on your computer? I have other programs using APRS not work on our Search and Rescue team computers because the person that set up the computers had us signing in as a different user. As soon as we said run as Admin, it worked. www.dmapper.com.
Jardy Dawson WA7JRD Ham Radio
Message relayed through SETI (Search for Extra-Terrestrial Intelligence, although no terrestrial intelligence has been found yet, either)
On Jul 22, 2015, at 17:21, Mike Raymond K5HUM@ARRL.NET wrote:
Still does not work. To check, I uninstalled the Prolific 3_2_0_0 driver on my good W7 machine, followed your instructions, re installed, and everything worked fine.
I then used the SAME procedures and driver on the W8.1 machine and got the same dang error. Im sure its something specific to W8.1 or my Dell 630 Laptop, but its still eluding me.
Since I can program with Chirp on my UV-3R and W7 machine, I will leave it with that. Thanks for trying.
73, Mike
On Wed, Jul 22, 2015 at 5:51 PM, mats.g.roos@gmail.com mats.g.roos@gmail.com wrote:
Open Device Manager Remove Old Com ports and USB devices: Proceed to step 2 of this tutorial. When that is done, still in Device manager, navigate to your problem USB cable (it should have a yellow exclamation mark on it) Remove it, and then reinstall the driver If that driver will still not work then: Right click on it, and choose update driver. Click Browse my Computer... Click Let me pick from a list... A list of all of the drivers should show. Choose the oldest Prolific driver on the list. I chose version 3.2.0 from 2007 Install it, and you're done! If you are using PuTTy, note that when you connect, the COM port may not work as expected. What you should do, if you need to, is go into the Serial options in the main PuTTy window, and turn off flow control.
Everything should work right now.
Mats
On Jul 22, 2015, at 3:12 PM, Mike Raymond K5HUM@ARRL.NET wrote:
Jim,
I was not trying to be cute, just frustrated. I did not just fall off the turnip truck and have been around Windows quite a few years.
The driver is a Win_Driver_Prolific_3_2_0_0. The error being reported is:
"This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation."
The SAME driver and USB to serial cable work fine on my 64b W7 machine just not on my W8.1 64b Dell D630.....which accounts for my frustration. Im not sure what other info I can provide thats relevant but I would like to solve the problem.
73 Mike K5HUM
On Wed, Jul 22, 2015 at 4:03 PM, Jim Unroe rock.unroe@gmail.com wrote: On Wed, Jul 22, 2015 at 8:52 AM, Mike Raymond K5HUM@arrl.net wrote:
Hi Jim,
Thanks for the kind efforts but still No Joy :( Maybe I need to give it a rest for a while hihi
TallyHo Mike
It doesn't help us help you when you just say "no joy". What driver is device manager showing you have? How about attaching a screen capture of the driver tab of the programming cable?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
If you really have a Prolific chip you would use a Prolific driver, but not so for FTDI chip.
Assuming you really have a prolific chip, there are some chips Prolific decided not to support in Win 8.1 64-bit, even if they are genuine Prolific chips. For a while, I was able to roll back the drivers and get them to work anyway. But recently they seemed to have changed something that causes the old driver to fail. Note that this even happens with know genuine Prolific chips!
I finally gave up and built my own FTDI cable with parts from Sparkfun. Works every time!
On 07/21/2015 09:02 PM, Mike Raymond wrote:
Ok, the Win_Driver_Prolific_3_2_0_0 with a FTDI chip cable and Chirp (or UV-3R tranceiver software), all work great on my XP and W7 machines.
Installing the same driver and cable on my W8.1 Laptop produces the following error:
This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.
Any suggestions on how to solve the W8.1 problems? Does W8.1 require a special driver? cable?
Thanks, Mike K5HUM@ARRL.NET mailto:K5HUM@ARRL.NET
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (6)
-
Jardy -
Jardy Dawson
-
Jim Unroe -
mats.g.roos＠gmail.com -
Mike Raymond -
W Paul Mills