I recently had trouble programming a Baofeng UV 8 HP No matter what I did, it would not take any frequencies, using the latest Chirp, from about a month ago. I finally booted to my windows 7 that I have in a VM, with an old chirp on it, and it programmed just fine. Glenn
----- Original Message ----- From: David Garth To: chirp_users@intrepid.danplanet.com Sent: Saturday, February 3, 2024 7:05 PM Subject: [chirp_users] Problem with Baofeng settings
I have had three other Baofeng UV-5R radio and had no problems programming with Chirp. I’m using the latest Mac Chirp version.
But, I just received a new UV5R, and, after downloading from the radio, creating a frequency list, and then uploading, I’m not able to get to the settings page. I get a blank page and an error message. (See attached.) I tried a menu “reset all” and a three-button “factory reset” to no avail. Any ideas?
Dave Garth dave@davegarth.com 805-441-8448 2046 San Luis Drive San Luis Obispo, CA 93401 Web: www.davegarth.com
--------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY ?? at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
