I recently had trouble programming a Baofeng
UV 8 HP
No matter what I did, it would not take any
frequencies, using the latest Chirp, from about a month ago.
I finally booted to my windows 7 that I have in a
VM, with an old chirp on it, and it programmed just fine.
Glenn
----- Original Message -----
Sent: Saturday, February 3, 2024 7:05 PM
Subject: [chirp_users] Problem with Baofeng settings
I have had three
other Baofeng UV-5R radio and had no problems programming with Chirp. I’m using
the latest Mac Chirp version.But, I just received a new UV5R, and,
after downloading from the radio, creating a frequency list, and then uploading,
I’m not able to get to the settings page. I get a blank page and an error
message. (See attached.) I tried a menu “reset all” and a three-button “factory
reset” to no avail. Any ideas?
Dave Garth
dave@davegarth.com
805-441-8448
2046 San Luis Drive
San Luis Obispo, CA 93401
Web: www.davegarth.com
_______________________________________________
chirp_users mailing
list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This
message was sent to K0LNY ?? at glenn@ervin.email
To unsubscribe, send an
email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email
as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
Searchable archive:
https://www.mail-archive.com/chirp_users@intrepid.danplanet.com