[chirp_users] UV-5RA - latest build
Long story....but I'll summarize the current issue.
I had my old UV-5RA talking to a 2014-vintage version of Chirp. Worked fine.
Got a new UV-5RV2+. Doesn't talk to the 2014 version.
Downloaded/Installed the latest nightly Chirp build - 20160604 .
Won't talk to either the previously-working UV-5RA or the new UV-5RV2+. Radio does not respond.
Where do I go from here ?
73, Steve, N2IC
On Wed, Jun 8, 2016 at 11:00 AM, Steve London n2icarrl@gmail.com wrote:
Long story....but I'll summarize the current issue.
I had my old UV-5RA talking to a 2014-vintage version of Chirp. Worked fine.
Got a new UV-5RV2+. Doesn't talk to the 2014 version.
Downloaded/Installed the latest nightly Chirp build - 20160604 .
Won't talk to either the previously-working UV-5RA or the new UV-5RV2+. Radio does not respond.
Where do I go from here ?
73, Steve, N2IC
If the UV-5RV2+ is a new radio with 3 power levels (often called HP or TP), then you need to select BF-F8HP as the model.
If you are using Windows and your programming cable has a Prolific type USB-to-TTL chip in it, it is more likely that the reason that you can't read either radio is because the device driver was updated since the last time you were successful using the 2014 version. Check device manager and if the driver version is newer than v3.2.0.0, then you need to download, install and select it per the guide on miklor.com.
http://www.miklor.com/COM/UV_Drivers.php
Jim KC9HI
I have had issues with previous chirp builds. What has worked in the past is downloading from the radio first before proceding. Hope this helps. On Jun 8, 2016 9:02 AM, "Steve London" n2icarrl@gmail.com wrote:
Long story....but I'll summarize the current issue.
I had my old UV-5RA talking to a 2014-vintage version of Chirp. Worked fine.
Got a new UV-5RV2+. Doesn't talk to the 2014 version.
Downloaded/Installed the latest nightly Chirp build - 20160604 .
Won't talk to either the previously-working UV-5RA or the new UV-5RV2+. Radio does not respond.
Where do I go from here ?
73, Steve, N2IC _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Frazier at ricknbrook@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Wed, Jun 8, 2016 at 10:21 AM, Curley Frazier ricknbrook@gmail.com wrote:
What has worked in the past is downloading from the radio first before proceding. Hope this helps.
This is always how you should do it. Never upload a .img to a radio different than it was downloaded from. You never know what could be in that .img file that may not be compatible with a different radio due to differing firmware versions, etc.
Always start by downloading from radio, save that .img as a backup. Then you can start copy/pasting or importing channels from various sources. Save as a new file so as not overwrite your backup, then upload to radio.
Tom KD7LXL
Success !
It ended up being three issues:
1) The speaker and mic jacks on my new UV-5RV2+ are not centered. They are off by a few mm. Therefore, my programming cable would not seat correctly. Trimmed the cable plug with a utility knife until it seated properly. Incidentally, my old UV-5RA has the jacks centered.
2) While trimming the cable plug, I accidentally cut the ground wire. After repairing that, the old UV-5RA could be read with CHIRP.
3) The 2014 version of CHIRP does not talk to the new UV-5RV2+. The latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73, Steve, N2IC
Awesome! On Jun 8, 2016 2:52 PM, "Steve London" n2icarrl@gmail.com wrote:
Success !
It ended up being three issues:
- The speaker and mic jacks on my new UV-5RV2+ are not centered. They
are off by a few mm. Therefore, my programming cable would not seat correctly. Trimmed the cable plug with a utility knife until it seated properly. Incidentally, my old UV-5RA has the jacks centered.
- While trimming the cable plug, I accidentally cut the ground wire.
After repairing that, the old UV-5RA could be read with CHIRP.
- The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73, Steve, N2IC _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Frazier at ricknbrook@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Wed, Jun 8, 2016 at 4:51 PM, Steve London n2icarrl@gmail.com wrote:
Success !
It ended up being three issues:
- The speaker and mic jacks on my new UV-5RV2+ are not centered. They
are off by a few mm. Therefore, my programming cable would not seat correctly. Trimmed the cable plug with a utility knife until it seated properly. Incidentally, my old UV-5RA has the jacks centered.
- While trimming the cable plug, I accidentally cut the ground wire.
After repairing that, the old UV-5RA could be read with CHIRP.
- The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73, Steve, N2IC
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI
Their response to me complaining about failure to release new firmware....
Curley
All of our models work with CHIRP as a distributor we work with CHIRP more than any other distributor - we are the only BaoFeng distributor that also insures our firmware matches on the same model to allow for easier templates
If you intended to write the factory you can go to: baofengradio.com On Jun 8, 2016 3:10 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Wed, Jun 8, 2016 at 4:51 PM, Steve London n2icarrl@gmail.com wrote:
Success !
It ended up being three issues:
- The speaker and mic jacks on my new UV-5RV2+ are not centered. They
are off by a few mm. Therefore, my programming cable would not seat correctly. Trimmed the cable plug with a utility knife until it seated properly. Incidentally, my old UV-5RA has the jacks centered.
- While trimming the cable plug, I accidentally cut the ground wire.
After repairing that, the old UV-5RA could be read with CHIRP.
- The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73, Steve, N2IC
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Frazier at ricknbrook@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
My complaint
Regarding Firmware. If you refuse to provide Firmware to CHIRP programmers I will stop supporting your business & stop using your radios. I have sent you a lot of sales because of CHIRP & how easy it is to use. I love your radios & CHIRP. Together they are great! Honestly your software sucks! It is very difficult to use. I will not try it again. I suggest you supply CHIRP with the UV-5RV2+ & any future firmware or I will boycott your products & send new radio interests elsewhere. On Jun 8, 2016 3:10 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Wed, Jun 8, 2016 at 4:51 PM, Steve London n2icarrl@gmail.com wrote:
Success !
It ended up being three issues:
- The speaker and mic jacks on my new UV-5RV2+ are not centered. They
are off by a few mm. Therefore, my programming cable would not seat correctly. Trimmed the cable plug with a utility knife until it seated properly. Incidentally, my old UV-5RA has the jacks centered.
- While trimming the cable plug, I accidentally cut the ground wire.
After repairing that, the old UV-5RA could be read with CHIRP.
- The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73, Steve, N2IC
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Frazier at ricknbrook@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Baofeng Tech South Dakota
The v2+ is not a model we sell or support and this is the issue
Our models are CHIRP compatible On Jun 8, 2016 8:33 PM, "Curley Frazier" ricknbrook@gmail.com wrote:
My complaint
Regarding Firmware. If you refuse to provide Firmware to CHIRP programmers I will stop supporting your business & stop using your radios. I have sent you a lot of sales because of CHIRP & how easy it is to use. I love your radios & CHIRP. Together they are great! Honestly your software sucks! It is very difficult to use. I will not try it again. I suggest you supply CHIRP with the UV-5RV2+ & any future firmware or I will boycott your products & send new radio interests elsewhere. On Jun 8, 2016 3:10 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Wed, Jun 8, 2016 at 4:51 PM, Steve London n2icarrl@gmail.com wrote:
Success !
It ended up being three issues:
- The speaker and mic jacks on my new UV-5RV2+ are not centered. They
are off by a few mm. Therefore, my programming cable would not seat correctly. Trimmed the cable plug with a utility knife until it seated properly. Incidentally, my old UV-5RA has the jacks centered.
- While trimming the cable plug, I accidentally cut the ground wire.
After repairing that, the old UV-5RA could be read with CHIRP.
- The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73, Steve, N2IC
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Frazier at ricknbrook@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Uh oh. Is the V2+ the one that Woot just liquidated?
Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:40 PM
Baofeng Tech South Dakota
The v2+ is not a model we sell or support and this is the issue
Our models are CHIRP compatible
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:33 PM
My complaint
Regarding Firmware. If you refuse to provide Firmware to CHIRP programmers I will stop supporting your business & stop using your radios. I have sent you a lot of sales because of CHIRP & how easy it is to use. I love your radios & CHIRP. Together they are great! Honestly your software sucks! It is very difficult to use. I will not try it again. I suggest you supply CHIRP with the UV-5RV2+ & any future firmware or I will boycott your products & send new radio interests elsewhere.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Jim Unroe mailto:rock.unroe@gmail.com Wednesday, June 08, 2016 3:09 PM
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Steve London mailto:n2icarrl@gmail.com Wednesday, June 08, 2016 2:51 PM Success !
It ended up being three issues:
- The speaker and mic jacks on my new UV-5RV2+ are not centered. They
are off by a few mm. Therefore, my programming cable would not seat correctly. Trimmed the cable plug with a utility knife until it seated properly. Incidentally, my old UV-5RA has the jacks centered.
- While trimming the cable plug, I accidentally cut the ground wire.
After repairing that, the old UV-5RA could be read with CHIRP.
- The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73, Steve, N2IC _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Tom Hayward mailto:tom@tomh.us Wednesday, June 08, 2016 11:37 AM
This is always how you should do it. Never upload a .img to a radio different than it was downloaded from. You never know what could be in that .img file that may not be compatible with a different radio due to differing firmware versions, etc.
Always start by downloading from radio, save that .img as a backup. Then you can start copy/pasting or importing channels from various sources. Save as a new file so as not overwrite your backup, then upload to radio.
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Yes, the V2+ is the model that was on WOOT.
John Http://www.miklor.com
On Jun 8, 2016, at 11:40 PM, Trevor Holyoak trevor@holyoak.com wrote:
Uh oh. Is the V2+ the one that Woot just liquidated?
Curley Frazier Wednesday, June 08, 2016 8:40 PM Baofeng Tech South Dakota
The v2+ is not a model we sell or support and this is the issue
Our models are CHIRP compatible
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier Wednesday, June 08, 2016 8:33 PM My complaint
Regarding Firmware. If you refuse to provide Firmware to CHIRP programmers I will stop supporting your business & stop using your radios. I have sent you a lot of sales because of CHIRP & how easy it is to use. I love your radios & CHIRP. Together they are great! Honestly your software sucks! It is very difficult to use. I will not try it again. I suggest you supply CHIRP with the UV-5RV2+ & any future firmware or I will boycott your products & send new radio interests elsewhere.
YES, the Chinese sold it to the North Koreans.
On Jun 8, 2016, at 11:40 PM, Trevor Holyoak trevor@holyoak.com wrote:
Uh oh. Is the V2+ the one that Woot just liquidated?
Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:40 PM Baofeng Tech South Dakota
The v2+ is not a model we sell or support and this is the issue
Our models are CHIRP compatible
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com mailto:trevor@holyoak.com at trevor@holyoak.com mailto:trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:33 PM My complaint
Regarding Firmware. If you refuse to provide Firmware to CHIRP programmers I will stop supporting your business & stop using your radios. I have sent you a lot of sales because of CHIRP & how easy it is to use. I love your radios & CHIRP. Together they are great! Honestly your software sucks! It is very difficult to use. I will not try it again. I suggest you supply CHIRP with the UV-5RV2+ & any future firmware or I will boycott your products & send new radio interests elsewhere.
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com mailto:trevor@holyoak.com at trevor@holyoak.com mailto:trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com Jim Unroe mailto:rock.unroe@gmail.com Wednesday, June 08, 2016 3:09 PM
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com mailto:trevor@holyoak.com at trevor@holyoak.com mailto:trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com Steve London mailto:n2icarrl@gmail.com Wednesday, June 08, 2016 2:51 PM Success !
It ended up being three issues:
- The speaker and mic jacks on my new UV-5RV2+ are not centered. They
are off by a few mm. Therefore, my programming cable would not seat correctly. Trimmed the cable plug with a utility knife until it seated properly. Incidentally, my old UV-5RA has the jacks centered.
- While trimming the cable plug, I accidentally cut the ground wire.
After repairing that, the old UV-5RA could be read with CHIRP.
- The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73, Steve, N2IC _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com mailto:trevor@holyoak.com at trevor@holyoak.com mailto:trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com Tom Hayward mailto:tom@tomh.us Wednesday, June 08, 2016 11:37 AM
This is always how you should do it. Never upload a .img to a radio different than it was downloaded from. You never know what could be in that .img file that may not be compatible with a different radio due to differing firmware versions, etc.
Always start by downloading from radio, save that .img as a backup. Then you can start copy/pasting or importing channels from various sources. Save as a new file so as not overwrite your backup, then upload to radio.
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com mailto:trevor@holyoak.com at trevor@holyoak.com mailto:trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
-- Sent from Postbox https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campaign=reach_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Richard Isaacs at goldporsche944@aol.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Yup. Amazon is doing the best they can to dump them On Jun 8, 2016 9:41 PM, "Trevor Holyoak" trevor@holyoak.com wrote:
Uh oh. Is the V2+ the one that Woot just liquidated?
Curley Frazier ricknbrook@gmail.com Wednesday, June 08, 2016 8:40 PM
Baofeng Tech South Dakota
The v2+ is not a model we sell or support and this is the issue
Our models are CHIRP compatible _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier ricknbrook@gmail.com Wednesday, June 08, 2016 8:33 PM
My complaint
Regarding Firmware. If you refuse to provide Firmware to CHIRP programmers I will stop supporting your business & stop using your radios. I have sent you a lot of sales because of CHIRP & how easy it is to use. I love your radios & CHIRP. Together they are great! Honestly your software sucks! It is very difficult to use. I will not try it again. I suggest you supply CHIRP with the UV-5RV2+ & any future firmware or I will boycott your products & send new radio interests elsewhere. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Jim Unroe rock.unroe@gmail.com Wednesday, June 08, 2016 3:09 PM
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Steve London n2icarrl@gmail.com Wednesday, June 08, 2016 2:51 PM Success !
It ended up being three issues:
- The speaker and mic jacks on my new UV-5RV2+ are not centered. They
are off by a few mm. Therefore, my programming cable would not seat correctly. Trimmed the cable plug with a utility knife until it seated properly. Incidentally, my old UV-5RA has the jacks centered.
- While trimming the cable plug, I accidentally cut the ground wire.
After repairing that, the old UV-5RA could be read with CHIRP.
- The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73, Steve, N2IC _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Tom Hayward tom@tomh.us Wednesday, June 08, 2016 11:37 AM
This is always how you should do it. Never upload a .img to a radio different than it was downloaded from. You never know what could be in that .img file that may not be compatible with a different radio due to differing firmware versions, etc.
Always start by downloading from radio, save that .img as a backup. Then you can start copy/pasting or importing channels from various sources. Save as a new file so as not overwrite your backup, then upload to radio.
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- Sent from Postbox https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campaign=reach
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Frazier at ricknbrook@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Who, the North Koreans?
On Jun 9, 2016, at 12:16 AM, Curley Frazier ricknbrook@gmail.com wrote:
Yup. Amazon is doing the best they can to dump them On Jun 8, 2016 9:41 PM, "Trevor Holyoak" <trevor@holyoak.com mailto:trevor@holyoak.com> wrote: Uh oh. Is the V2+ the one that Woot just liquidated?
Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:40 PM Baofeng Tech South Dakota
The v2+ is not a model we sell or support and this is the issue
Our models are CHIRP compatible
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com mailto:trevor@holyoak.com at trevor@holyoak.com mailto:trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:33 PM My complaint
Regarding Firmware. If you refuse to provide Firmware to CHIRP programmers I will stop supporting your business & stop using your radios. I have sent you a lot of sales because of CHIRP & how easy it is to use. I love your radios & CHIRP. Together they are great! Honestly your software sucks! It is very difficult to use. I will not try it again. I suggest you supply CHIRP with the UV-5RV2+ & any future firmware or I will boycott your products & send new radio interests elsewhere.
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com mailto:trevor@holyoak.com at trevor@holyoak.com mailto:trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com Jim Unroe mailto:rock.unroe@gmail.com Wednesday, June 08, 2016 3:09 PM
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com mailto:trevor@holyoak.com at trevor@holyoak.com mailto:trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com Steve London mailto:n2icarrl@gmail.com Wednesday, June 08, 2016 2:51 PM Success !
It ended up being three issues:
- The speaker and mic jacks on my new UV-5RV2+ are not centered. They
are off by a few mm. Therefore, my programming cable would not seat correctly. Trimmed the cable plug with a utility knife until it seated properly. Incidentally, my old UV-5RA has the jacks centered.
- While trimming the cable plug, I accidentally cut the ground wire.
After repairing that, the old UV-5RA could be read with CHIRP.
- The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73, Steve, N2IC _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com mailto:trevor@holyoak.com at trevor@holyoak.com mailto:trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com Tom Hayward mailto:tom@tomh.us Wednesday, June 08, 2016 11:37 AM
This is always how you should do it. Never upload a .img to a radio different than it was downloaded from. You never know what could be in that .img file that may not be compatible with a different radio due to differing firmware versions, etc.
Always start by downloading from radio, save that .img as a backup. Then you can start copy/pasting or importing channels from various sources. Save as a new file so as not overwrite your backup, then upload to radio.
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com mailto:trevor@holyoak.com at trevor@holyoak.com mailto:trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
-- Sent from Postbox https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campaign=reach _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Frazier at ricknbrook@gmail.com mailto:ricknbrook@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Richard Isaacs at goldporsche944@aol.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Mine arrived yesterday, and it does not appear to have come from Amazon's inventory. It had a packing slip from a company called Foscam.
Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 10:16 PM
Yup. Amazon is doing the best they can to dump them
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Trevor Holyoak mailto:trevor@holyoak.com Wednesday, June 08, 2016 9:40 PM Uh oh. Is the V2+ the one that Woot just liquidated?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:40 PM
Baofeng Tech South Dakota
The v2+ is not a model we sell or support and this is the issue
Our models are CHIRP compatible
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:33 PM
My complaint
Regarding Firmware. If you refuse to provide Firmware to CHIRP programmers I will stop supporting your business & stop using your radios. I have sent you a lot of sales because of CHIRP & how easy it is to use. I love your radios & CHIRP. Together they are great! Honestly your software sucks! It is very difficult to use. I will not try it again. I suggest you supply CHIRP with the UV-5RV2+ & any future firmware or I will boycott your products & send new radio interests elsewhere.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Jim Unroe mailto:rock.unroe@gmail.com Wednesday, June 08, 2016 3:09 PM
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Be careful. I hear those don't work well. JC KF5WhC
Sent from my iPhone
On Jun 11, 2016, at 11:31 AM, Trevor Holyoak trevor@holyoak.com wrote:
Mine arrived yesterday, and it does not appear to have come from Amazon's inventory. It had a packing slip from a company called Foscam.
Curley Frazier Wednesday, June 08, 2016 10:16 PM Yup. Amazon is doing the best they can to dump them _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Trevor Holyoak Wednesday, June 08, 2016 9:40 PM Uh oh. Is the V2+ the one that Woot just liquidated?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier Wednesday, June 08, 2016 8:40 PM Baofeng Tech South Dakota
The v2+ is not a model we sell or support and this is the issue
Our models are CHIRP compatible
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier Wednesday, June 08, 2016 8:33 PM My complaint
Regarding Firmware. If you refuse to provide Firmware to CHIRP programmers I will stop supporting your business & stop using your radios. I have sent you a lot of sales because of CHIRP & how easy it is to use. I love your radios & CHIRP. Together they are great! Honestly your software sucks! It is very difficult to use. I will not try it again. I suggest you supply CHIRP with the UV-5RV2+ & any future firmware or I will boycott your products & send new radio interests elsewhere.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Jim Unroe Wednesday, June 08, 2016 3:09 PM
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- Sent from Postbox _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to JC at kf5whc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Well, I can confirm that it at least does work with CHIRP (by selecting UV-5R).
-Trevor KD7GHI
KF5WHC mailto:kf5whc@gmail.com Saturday, June 11, 2016 10:35 AM Be careful. I hear those don't work well. JC KF5WhC
Sent from my iPhone
On Jun 11, 2016, at 11:31 AM, Trevor Holyoak <trevor@holyoak.com mailto:trevor@holyoak.com> wrote:
Mine arrived yesterday, and it does not appear to have come from Amazon's inventory. It had a packing slip from a company called Foscam.
Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 10:16 PM
Yup. Amazon is doing the best they can to dump them
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Trevor Holyoak mailto:trevor@holyoak.com Wednesday, June 08, 2016 9:40 PM Uh oh. Is the V2+ the one that Woot just liquidated?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:40 PM
Baofeng Tech South Dakota
The v2+ is not a model we sell or support and this is the issue
Our models are CHIRP compatible
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:33 PM
My complaint
Regarding Firmware. If you refuse to provide Firmware to CHIRP programmers I will stop supporting your business & stop using your radios. I have sent you a lot of sales because of CHIRP & how easy it is to use. I love your radios & CHIRP. Together they are great! Honestly your software sucks! It is very difficult to use. I will not try it again. I suggest you supply CHIRP with the UV-5RV2+ & any future firmware or I will boycott your products & send new radio interests elsewhere.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Jim Unroe mailto:rock.unroe@gmail.com Wednesday, June 08, 2016 3:09 PM
I'm glad to see you have it worked out.
UV-5R style radio development for CHIRP has been quited active over the last 4+ years. Except for a few recent models that chose not to provide their firmware version, it you cannot program your UV-5R variant, there is a 99% chance that it is a cabling problem (device driver and/or connection of the cable to the radio).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to JC at kf5whc@gmail.com mailto:kf5whc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Trevor Holyoak mailto:trevor@holyoak.com Saturday, June 11, 2016 10:31 AM Mine arrived yesterday, and it does not appear to have come from Amazon's inventory. It had a packing slip from a company called Foscam.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 10:16 PM
Yup. Amazon is doing the best they can to dump them
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Trevor Holyoak mailto:trevor@holyoak.com Wednesday, June 08, 2016 9:40 PM Uh oh. Is the V2+ the one that Woot just liquidated?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 8:40 PM
Baofeng Tech South Dakota
The v2+ is not a model we sell or support and this is the issue
Our models are CHIRP compatible
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Foscam runs baofengradio.us.
Tom ND5Y
Mine arrived yesterday, and it does not appear to have come from Amazon's inventory. It had a packing slip from a company called Foscam.
Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 10:16 PM
Yup. Amazon is doing the best they can to dump them
Are you talking about this V2+
https://smile.amazon.com/gp/product/B00HX03AMA/ref=oh_aui_detailpage_o05_s00...
On 06/11/2016 12:38 PM, Tom Consodine via chirp_users wrote:
Foscam runs baofengradio.us.
Tom ND5Y
Mine arrived yesterday, and it does not appear to have come from Amazon's inventory. It had a packing slip from a company called Foscam.
Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 10:16 PM
Yup. Amazon is doing the best they can to dump them
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Eugene at enine@ninefamily.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
It's the BF-F9 V2+ Tri-Power on that page, not the UV-5R V2+.
Eugene mailto:enine@ninefamily.com Saturday, June 11, 2016 10:59 AM Are you talking about this V2+
https://smile.amazon.com/gp/product/B00HX03AMA/ref=oh_aui_detailpage_o05_s00...
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Tom Consodine via chirp_users mailto:chirp_users@intrepid.danplanet.com Saturday, June 11, 2016 10:38 AM Foscam runs baofengradio.us.
Tom ND5Y
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Trevor Holyoak mailto:trevor@holyoak.com Saturday, June 11, 2016 10:31 AM Mine arrived yesterday, and it does not appear to have come from Amazon's inventory. It had a packing slip from a company called Foscam.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 10:16 PM
Yup. Amazon is doing the best they can to dump them
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Trevor Holyoak mailto:trevor@holyoak.com Wednesday, June 08, 2016 9:40 PM Uh oh. Is the V2+ the one that Woot just liquidated?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Ok, I was going to say the UV-5R V2+ works fine.
On 06/11/2016 01:02 PM, Trevor Holyoak wrote:
It's the BF-F9 V2+ Tri-Power on that page, not the UV-5R V2+.
Eugene mailto:enine@ninefamily.com Saturday, June 11, 2016 10:59 AM Are you talking about this V2+
https://smile.amazon.com/gp/product/B00HX03AMA/ref=oh_aui_detailpage_o05_s00...
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Tom Consodine via chirp_users mailto:chirp_users@intrepid.danplanet.com Saturday, June 11, 2016 10:38 AM Foscam runs baofengradio.us.
Tom ND5Y
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Trevor Holyoak mailto:trevor@holyoak.com Saturday, June 11, 2016 10:31 AM Mine arrived yesterday, and it does not appear to have come from Amazon's inventory. It had a packing slip from a company called Foscam.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Curley Frazier mailto:ricknbrook@gmail.com Wednesday, June 08, 2016 10:16 PM
Yup. Amazon is doing the best they can to dump them
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com Trevor Holyoak mailto:trevor@holyoak.com Wednesday, June 08, 2016 9:40 PM Uh oh. Is the V2+ the one that Woot just liquidated?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to trevor@holyoak.com at trevor@holyoak.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- Sent from Postbox https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campaign=reach
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Eugene at enine@ninefamily.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (10)
-
Curley Frazier -
Eugene -
Jim Unroe -
John LaMartina ☀ -
KF5WHC -
Rick -
Steve London -
Tom Consodine -
Tom Hayward -
Trevor Holyoak