Awesome!
Success !
It ended up being three issues:
1) The speaker and mic jacks on my new UV-5RV2+ are not centered. They
are off by a few mm. Therefore, my programming cable would not seat
correctly. Trimmed the cable plug with a utility knife until it seated
properly. Incidentally, my old UV-5RA has the jacks centered.
2) While trimming the cable plug, I accidentally cut the ground wire.
After repairing that, the old UV-5RA could be read with CHIRP.
3) The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
latest build does work correctly with the UV-5RV2+. Thanks !
A learning experience.
73,
Steve, N2IC
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Rick Frazier at ricknbrook@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com