[chirp_users] Kenwood TK-762H
I have a couple of old Kenwood TK-762H transceivers. I see the issue on http://chirp.danplanet.com/issues/3139 but I seem to be having troubles. When I attempt to read from the radio using TK-762G it appears to read from the radio then dumps the error dialog *"An error has occurred: The radio doesn't accept program mode"*
ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 884, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 517, in do_download _open_radio(radio, status) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 478, in _open_radio raise errors.RadioError("The radio doesn't accept program mode") RadioError: The radio doesn't accept program mode
ERROR: ---------------- ERROR: Clone failed: The radio doesn't accept program mode ERROR: --- Exception Dialog: The radio doesn't accept program mode --- ERROR: None
ERROR: ----------------------------
If I attempt using TK-760 chirp attmpts to read and almost immediately dumps the error dialog saying *"An error has occurred Radio refuse to enter into program mode after a few tries"* ERROR: ---------------------------- ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 411, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 255, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 227, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
FWIW I am running CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700 MHz (max) Kernel~4.2.0-34-generic i686 Mem~2035.9/3635.1MB HDD~750.2GB(35.9% used) Ubuntu 15.10 CHIRP daily-20160513 GTK 2.24.28 PyGTK 2.24.0 Python 2.7.10
I am also having issues with a QTY KT8900 I have tried to follow all this has been discussed on http://chirp.danplanet.com/issues/2673 but to no avail.
any assistance is appreciated
I have had the same issue with a 760H. Talked with Pavel. He seems to think its a firmware issue that he has not resolved at this time. Good luck. KC1EXK. On May 15, 2016 3:28 AM, "Tim Billingsley" kd5ckp@gmail.com wrote:
I have a couple of old Kenwood TK-762H transceivers. I see the issue on http://chirp.danplanet.com/issues/3139 but I seem to be having troubles. When I attempt to read from the radio using TK-762G it appears to read from the radio then dumps the error dialog *"An error has occurred: The radio doesn't accept program mode"*
ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 884, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 517, in do_download _open_radio(radio, status) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 478, in _open_radio raise errors.RadioError("The radio doesn't accept program mode") RadioError: The radio doesn't accept program mode
ERROR: ---------------- ERROR: Clone failed: The radio doesn't accept program mode ERROR: --- Exception Dialog: The radio doesn't accept program mode --- ERROR: None
ERROR: ----------------------------
If I attempt using TK-760 chirp attmpts to read and almost immediately dumps the error dialog saying *"An error has occurred Radio refuse to enter into program mode after a few tries"* ERROR: ---------------------------- ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 411, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 255, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 227, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
FWIW I am running CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700 MHz (max) Kernel~4.2.0-34-generic i686 Mem~2035.9/3635.1MB HDD~750.2GB(35.9% used) Ubuntu 15.10 CHIRP daily-20160513 GTK 2.24.28 PyGTK 2.24.0 Python 2.7.10
I am also having issues with a QTY KT8900 I have tried to follow all this has been discussed on http://chirp.danplanet.com/issues/2673 but to no avail.
any assistance is appreciated
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Marshall at dozerboy0157@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Thanks. I will be watching for progress On May 15, 2016 07:38, "David Marshall" dozerboy0157@gmail.com wrote:
I have had the same issue with a 760H. Talked with Pavel. He seems to think its a firmware issue that he has not resolved at this time. Good luck. KC1EXK. On May 15, 2016 3:28 AM, "Tim Billingsley" kd5ckp@gmail.com wrote:
I have a couple of old Kenwood TK-762H transceivers. I see the issue on http://chirp.danplanet.com/issues/3139 but I seem to be having troubles. When I attempt to read from the radio using TK-762G it appears to read from the radio then dumps the error dialog *"An error has occurred: The radio doesn't accept program mode"*
ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 884, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 517, in do_download _open_radio(radio, status) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 478, in _open_radio raise errors.RadioError("The radio doesn't accept program mode") RadioError: The radio doesn't accept program mode
ERROR: ---------------- ERROR: Clone failed: The radio doesn't accept program mode ERROR: --- Exception Dialog: The radio doesn't accept program mode --- ERROR: None
ERROR: ----------------------------
If I attempt using TK-760 chirp attmpts to read and almost immediately dumps the error dialog saying *"An error has occurred Radio refuse to enter into program mode after a few tries"* ERROR: ---------------------------- ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 411, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 255, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 227, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
FWIW I am running CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700 MHz (max) Kernel~4.2.0-34-generic i686 Mem~2035.9/3635.1MB HDD~750.2GB(35.9% used) Ubuntu 15.10 CHIRP daily-20160513 GTK 2.24.28 PyGTK 2.24.0 Python 2.7.10
I am also having issues with a QTY KT8900 I have tried to follow all this has been discussed on http://chirp.danplanet.com/issues/2673 but to no avail.
any assistance is appreciated
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Marshall at dozerboy0157@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tim at kd5ckp@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Sun, May 15, 2016 at 12:38 PM, David Marshall dozerboy0157@gmail.com wrote:
I have had the same issue with a 760H. Talked with Pavel. He seems to think its a firmware issue that he has not resolved at this time. Good luck. KC1EXK.
Also are any of the aforementioned issues OS related? If I locate a Windows machine should I expect any better results?
I am using Windows 10. The problem as explained to me is Windows program runs too fast . Radio cannot go into program mode fast enough before program times out. Pavel wrote a patch that made program try 3 times before giving up. That still did not fix problem. I asked about a month ago if any solution had been found, no reply. The only other way is to locate an older model computer that can run original MSDOS based software. Ebay about $130 plus price of software. Again good luck hate to toss my radio its in nice shape. KC1EXK 73s. On May 15, 2016 7:10 PM, "Tim Billingsley" kd5ckp@gmail.com wrote:
On Sun, May 15, 2016 at 12:38 PM, David Marshall dozerboy0157@gmail.com wrote:
I have had the same issue with a 760H. Talked with Pavel. He seems to think its a firmware issue that he has not resolved at this time. Good luck. KC1EXK.
Also are any of the aforementioned issues OS related? If I locate a Windows machine should I expect any better results?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Marshall at dozerboy0157@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Try downloading and running MOSLO, we used to use it for commercial software.
Charles Lowery, NM4V
Quoting David Marshall dozerboy0157@gmail.com:
I am using Windows 10. The problem as explained to me is Windows program runs too fast . Radio cannot go into program mode fast enough before program times out. Pavel wrote a patch that made program try 3 times before giving up. That still did not fix problem. I asked about a month ago if any solution had been found, no reply. The only other way is to locate an older model computer that can run original MSDOS based software. Ebay about $130 plus price of software. Again good luck hate to toss my radio its in nice shape. KC1EXK 73s. On May 15, 2016 7:10 PM, "Tim Billingsley" kd5ckp@gmail.com wrote:
On Sun, May 15, 2016 at 12:38 PM, David Marshall dozerboy0157@gmail.com wrote:
I have had the same issue with a 760H. Talked with Pavel. He seems to think its a firmware issue that he has not resolved at this time. Good luck. KC1EXK.
Also are any of the aforementioned issues OS related? If I locate a Windows machine should I expect any better results?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Marshall at dozerboy0157@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Would dosbox help? I seem to remember it has a feature to set clock speed.
Chris KM4PUR On May 15, 2016 8:32 PM, "clowery@va.net" clowery@va.net wrote:
Try downloading and running MOSLO, we used to use it for commercial software.
Charles Lowery, NM4V
Quoting David Marshall dozerboy0157@gmail.com:
I am using Windows 10. The problem as explained to me is Windows program runs too fast . Radio cannot go into program mode fast enough before program times out. Pavel wrote a patch that made program try 3 times
before
giving up. That still did not fix problem. I asked about a month ago if
any
solution had been found, no reply. The only other way is to locate an
older
model computer that can run original MSDOS based software. Ebay about
$130
plus price of software. Again good luck hate to toss my radio its in nice shape. KC1EXK 73s. On May 15, 2016 7:10 PM, "Tim Billingsley" kd5ckp@gmail.com wrote:
On Sun, May 15, 2016 at 12:38 PM, David Marshall <
dozerboy0157@gmail.com>
wrote:
I have had the same issue with a 760H. Talked with Pavel. He seems to think its a firmware issue that he has not resolved at this time. Good luck. KC1EXK.
Also are any of the aforementioned issues OS related? If I locate a Windows machine should I expect any better results?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David Marshall at dozerboy0157@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chris at chrispetry1971@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Hi Tim and everybody,
I had a lot of work recently and was away for a while... and now I'm paying attention to the new variants of the mobile QYT/BTECH/Juentai/Sainsonic etc mobiles that are growing like grass in the spring. (I'm in change of the communication procedures for that also...)
I will revisit the Kenwood TK-760 driver as soon as I can get free time, sorry for the delay on solving this.
73.
El 15/05/16 a las 03:27, Tim Billingsley escribió:
I have a couple of old Kenwood TK-762H transceivers. I see the issue on http://chirp.danplanet.com/issues/3139 but I seem to be having troubles. When I attempt to read from the radio using TK-762G it appears to read from the radio then dumps the error dialog *"An error has occurred: The radio doesn't accept program mode"*
ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 884, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 517, in do_download _open_radio(radio, status) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 478, in _open_radio raise errors.RadioError("The radio doesn't accept program mode") RadioError: The radio doesn't accept program mode
ERROR: ---------------- ERROR: Clone failed: The radio doesn't accept program mode ERROR: --- Exception Dialog: The radio doesn't accept program mode --- ERROR: None
ERROR: ----------------------------
If I attempt using TK-760 chirp attmpts to read and almost immediately dumps the error dialog saying *"An error has occurred Radio refuse to enter into program mode after a few tries"* ERROR: ---------------------------- ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 411, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 255, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 227, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
FWIW I am running CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700 MHz (max) Kernel~4.2.0-34-generic i686 Mem~2035.9/3635.1MB HDD~750.2GB(35.9% used) Ubuntu 15.10 CHIRP daily-20160513 GTK 2.24.28 PyGTK 2.24.0 Python 2.7.10
I am also having issues with a QTY KT8900 I have tried to follow all this has been discussed on http://chirp.danplanet.com/issues/2673 but to no avail.
any assistance is appreciated
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On May 16, 2016 08:57, "Pavel Milanes (CO7WT)" pavelmc@gmail.com wrote:
Hi Tim and everybody,
I had a lot of work recently and was away for a while... and now I'm
paying attention to the new variants of the mobile QYT/BTECH/Juentai/Sainsonic etc mobiles that are growing like grass in the spring. (I'm in change of the communication procedures for that also...)
I will revisit the Kenwood TK-760 driver as soon as I can get free time,
sorry for the delay on solving this.
Thanks for all that you and the other developers do!! I am in no big hurry.
El 15/05/16 a las 03:27, Tim Billingsley escribió:
I have a couple of old Kenwood TK-762H transceivers. I see the issue on
http://chirp.danplanet.com/issues/3139 but I seem to be having troubles. When I attempt to read from the radio using TK-762G it appears to read from the radio then dumps the error dialog "An error has occurred: The radio doesn't accept program mode"
ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238,
in run
self.__radio.sync_in()File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line
884, in sync_in
self._mmap = do_download(self)File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line
517, in do_download
_open_radio(radio, status)File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line
478, in _open_radio
raise errors.RadioError("The radio doesn't accept program mode")RadioError: The radio doesn't accept program mode
ERROR: ---------------- ERROR: Clone failed: The radio doesn't accept program mode ERROR: --- Exception Dialog: The radio doesn't accept program mode --- ERROR: None
ERROR: ----------------------------
If I attempt using TK-760 chirp attmpts to read and almost immediately
dumps the error dialog saying "An error has occurred Radio refuse to enter into program mode after a few tries"
ERROR: ---------------------------- ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238,
in run
self.__radio.sync_in()File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
411, in sync_in
self._mmap = do_download(self)File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
255, in do_download
open_radio(radio)File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
227, in open_radio
raise errors.RadioError(msg)RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few
tries
ERROR: --- Exception Dialog: Radio refuse to enter into program mode
after a few tries ---
ERROR: None
ERROR: ----------------------------
FWIW I am running CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700
MHz (max)
Kernel~4.2.0-34-generic i686 Mem~2035.9/3635.1MB HDD~750.2GB(35.9% used) Ubuntu 15.10 CHIRP daily-20160513 GTK 2.24.28 PyGTK 2.24.0 Python 2.7.10
I am also having issues with a QTY KT8900 I have tried to follow all this has been discussed on
http://chirp.danplanet.com/issues/2673 but to no avail.
any assistance is appreciated
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tim at kd5ckp@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
On Mon, May 16, 2016 at 1:55 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote:
Hi Tim and everybody,
I had a lot of work recently and was away for a while... and now I'm paying attention to the new variants of the mobile QYT/BTECH/Juentai/Sainsonic etc mobiles that are growing like grass in the spring. (I'm in change of the communication procedures for that also...)
I will revisit the Kenwood TK-760 driver as soon as I can get free time, sorry for the delay on solving this.
I apologize for the long delay. With health issues and an amount of tracel out of the way I have just tested 4 radios. 2 TK-762 and 2 TK-762H none worked. The CHIRP options of TK-760G & TK-762G appears to read from the radio then throws the error
ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 249, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 410, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 254, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 226, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
El 15/05/16 a las 03:27, Tim Billingsley escribió:
I have a couple of old Kenwood TK-762H transceivers. I see the issue on http://chirp.danplanet.com/issues/3139 but I seem to be having troubles. When I attempt to read from the radio using TK-762G it appears to read from the radio then dumps the error dialog *"An error has occurred: The radio doesn't accept program mode"*
ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 884, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 517, in do_download _open_radio(radio, status) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 478, in _open_radio raise errors.RadioError("The radio doesn't accept program mode") RadioError: The radio doesn't accept program mode
ERROR: ---------------- ERROR: Clone failed: The radio doesn't accept program mode ERROR: --- Exception Dialog: The radio doesn't accept program mode --- ERROR: None
ERROR: ----------------------------
If I attempt using TK-760 chirp attmpts to read and almost immediately dumps the error dialog saying *"An error has occurred Radio refuse to enter into program mode after a few tries"* ERROR: ---------------------------- ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 411, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 255, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 227, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
FWIW I am running CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700 MHz (max) Kernel~4.2.0-34-generic i686 Mem~2035.9/3635.1MB HDD~750.2GB(35.9% used) Ubuntu 15.10 CHIRP daily-20160513 GTK 2.24.28 PyGTK 2.24.0 Python 2.7.10
I am also having issues with a QTY KT8900 I have tried to follow all this has been discussed on http://chirp.danplanet.com/issues/2673 http://chirp.danplanet.com/issues/2673 but to no avail.
any assistance is appreciated
chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tim at kd5ckp@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Also...
CHIRP daily-20160717 on Linux - Ubuntu 15.10 (Python 2.7.10) GTK 2.24.28 PyGTK 2.24.0 Python 2.7.10
I forgot to add it to the previous message
Hi Tim, sorry to hear about your heard issues.
Can you please confirms that the cable interface is working? (it looks to me as a interface problem)
Also, your radios has the LCD backlight on?
There is a know issue with this radios about this: usually the kenwood interface for this radios take power from the radio not from the PC, and the power is taken from the same rail the LCD leds are powered.
For some reason with time (or a mic cable short) a medium power resistor burn out in the main board and get the front panel without +12V, that not a problem to the normal operation as it works on +5v, but the backlight gone off and the programmer has no power to feed from and always fails to operate.
Can you check that please?
73.
El 22/07/16 a las 09:32, Tim Billingsley escribió:
I apologize for the long delay. With health issues and an amount of tracel out of the way I have just tested 4 radios. 2 TK-762 and 2 TK-762H none worked. The CHIRP options of TK-760G & TK-762G appears to read from the radio then throws the error
ERROR: Traceback (most recent call last):
self.__radio.sync_in()File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 410, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 254, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 226, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
I will check that as time allows and I bet you are correct asI do not believe any of these old men light up any longer. I will advise as time allows.
73
On Fri, Jul 22, 2016 at 4:44 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote:
Hi Tim, sorry to hear about your heard issues.
Can you please confirms that the cable interface is working? (it looks to me as a interface problem)
Also, your radios has the LCD backlight on?
There is a know issue with this radios about this: usually the kenwood interface for this radios take power from the radio not from the PC, and the power is taken from the same rail the LCD leds are powered.
For some reason with time (or a mic cable short) a medium power resistor burn out in the main board and get the front panel without +12V, that not a problem to the normal operation as it works on +5v, but the backlight gone off and the programmer has no power to feed from and always fails to operate.
Can you check that please? 73.
El 22/07/16 a las 09:32, Tim Billingsley escribió:
I apologize for the long delay. With health issues and an amount of tracel out of the way I have just tested 4 radios. 2 TK-762 and 2 TK-762H none worked. The CHIRP options of TK-760G & TK-762G appears to read from the radio then throws the error
ERROR: Traceback (most recent call last):
self.__radio.sync_in()File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 410, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 254, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 226, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
-- 73 Pavel CO7WT.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tim at kd5ckp@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
Hi Tim, (I was off the grid by family vacations)
If the lights are off you have 90% chance of not having power to the interface, but, if you use a USB interface it may work... I have to check in the schematics but I'm pretty sure it will work with a USB programmer.
73 Pavel CO7WT
El 08/08/16 a las 11:35, Tim Billingsley escribió:
I will check that as time allows and I bet you are correct asI do not believe any of these old men light up any longer. I will advise as time allows.
73
On Fri, Jul 22, 2016 at 4:44 PM, Pavel Milanes (CO7WT) <pavelmc@gmail.com mailto:pavelmc@gmail.com> wrote:
Hi Tim, sorry to hear about your heard issues. Can you please confirms that the cable interface is working? (it looks to me as a interface problem) Also, your radios has the LCD backlight on? There is a know issue with this radios about this: usually the kenwood interface for this radios take power from the radio not from the PC, and the power is taken from the same rail the LCD leds are powered. For some reason with time (or a mic cable short) a medium power resistor burn out in the main board and get the front panel without +12V, that not a problem to the normal operation as it works on +5v, but the backlight gone off and the programmer has no power to feed from and always fails to operate. Can you check that please? 73. El 22/07/16 a las 09:32, Tim Billingsley escribió:I apologize for the long delay. With health issues and an amount of tracel out of the way I have just tested 4 radios. 2 TK-762 and 2 TK-762H none worked. The CHIRP options of TK-760G & TK-762G appears to read from the radio then throws the error ERROR: Traceback (most recent call last): self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 410, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 254, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 226, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None ERROR: ------------------------------ 73 Pavel CO7WT. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to Tim at kd5ckp@gmail.com <mailto:kd5ckp@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
anyone know why when i try to program my 857d that i get an error message when cloning?
On Wed, Aug 10, 2016 at 6:58 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote:
Hi Tim, (I was off the grid by family vacations)
If the lights are off you have 90% chance of not having power to the interface, but, if you use a USB interface it may work... I have to check in the schematics but I'm pretty sure it will work with a USB programmer.
73 Pavel CO7WT
El 08/08/16 a las 11:35, Tim Billingsley escribió:
I will check that as time allows and I bet you are correct asI do not believe any of these old men light up any longer. I will advise as time allows.
73
On Fri, Jul 22, 2016 at 4:44 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote:
Hi Tim, sorry to hear about your heard issues.
Can you please confirms that the cable interface is working? (it looks to me as a interface problem)
Also, your radios has the LCD backlight on?
There is a know issue with this radios about this: usually the kenwood interface for this radios take power from the radio not from the PC, and the power is taken from the same rail the LCD leds are powered.
For some reason with time (or a mic cable short) a medium power resistor burn out in the main board and get the front panel without +12V, that not a problem to the normal operation as it works on +5v, but the backlight gone off and the programmer has no power to feed from and always fails to operate.
Can you check that please? 73.
El 22/07/16 a las 09:32, Tim Billingsley escribió:
I apologize for the long delay. With health issues and an amount of tracel out of the way I have just tested 4 radios. 2 TK-762 and 2 TK-762H none worked. The CHIRP options of TK-760G & TK-762G appears to read from the radio then throws the error
ERROR: Traceback (most recent call last):
self.__radio.sync_in()File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 410, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 254, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 226, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
-- 73 Pavel CO7WT.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tim at kd5ckp@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- 73 Pavel CO7WT.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jon at savageman208@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
You don't say the error, but most problems come from having a fake Prolific chip. Go to Device Manager and check your comm port. If it says Prolific, roll your driver to 3.2.0.0. This can be found at Miklor.com.
Jardy Dawson WA7JRD Ham Radio
Message relayed through The Senior Boston Relay Race baton pass.
On Aug 11, 2016, at 14:30, Jon S savageman208@gmail.com wrote:
anyone know why when i try to program my 857d that i get an error message when cloning?
On Wed, Aug 10, 2016 at 6:58 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote: Hi Tim, (I was off the grid by family vacations)
If the lights are off you have 90% chance of not having power to the interface, but, if you use a USB interface it may work... I have to check in the schematics but I'm pretty sure it will work with a USB programmer.
73 Pavel CO7WT
El 08/08/16 a las 11:35, Tim Billingsley escribió: I will check that as time allows and I bet you are correct asI do not believe any of these old men light up any longer. I will advise as time allows.
73
On Fri, Jul 22, 2016 at 4:44 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote: Hi Tim, sorry to hear about your heard issues.
Can you please confirms that the cable interface is working? (it looks to me as a interface problem) Also, your radios has the LCD backlight on?
There is a know issue with this radios about this: usually the kenwood interface for this radios take power from the radio not from the PC, and the power is taken from the same rail the LCD leds are powered. For some reason with time (or a mic cable short) a medium power resistor burn out in the main board and get the front panel without +12V, that not a problem to the normal operation as it works on +5v, but the backlight gone off and the programmer has no power to feed from and always fails to operate.
Can you check that please? 73.
El 22/07/16 a las 09:32, Tim Billingsley escribió: I apologize for the long delay. With health issues and an amount of tracel out of the way I have just tested 4 radios. 2 TK-762 and 2 TK-762H none worked. The CHIRP options of TK-760G & TK-762G appears to read from the radio then throws the error
ERROR: Traceback (most recent call last):
self.__radio.sync_in()File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 410, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 254, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 226, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
-- 73 Pavel CO7WT.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tim at kd5ckp@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- 73 Pavel CO7WT.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jon at savageman208@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Aug 11, 2016, at 16:57, Jardy Dawson via chirp_users chirp_users@intrepid.danplanet.com wrote:
You don't say the error, but most problems come from having a fake Prolific chip. Go to Device Manager and check your comm port. If it says Prolific, roll your driver to 3.2.0.0. This can be found at Miklor.com.
Jardy Dawson WA7JRD Ham Radio
Message relayed through The Senior Boston Relay Race baton pass.
On Aug 11, 2016, at 14:30, Jon S savageman208@gmail.com wrote:
anyone know why when i try to program my 857d that i get an error message when cloning?
On Wed, Aug 10, 2016 at 6:58 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote: Hi Tim, (I was off the grid by family vacations)
If the lights are off you have 90% chance of not having power to the interface, but, if you use a USB interface it may work... I have to check in the schematics but I'm pretty sure it will work with a USB programmer.
73 Pavel CO7WT
El 08/08/16 a las 11:35, Tim Billingsley escribió: I will check that as time allows and I bet you are correct asI do not believe any of these old men light up any longer. I will advise as time allows.
73
On Fri, Jul 22, 2016 at 4:44 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote: Hi Tim, sorry to hear about your heard issues.
Can you please confirms that the cable interface is working? (it looks to me as a interface problem) Also, your radios has the LCD backlight on?
There is a know issue with this radios about this: usually the kenwood interface for this radios take power from the radio not from the PC, and the power is taken from the same rail the LCD leds are powered. For some reason with time (or a mic cable short) a medium power resistor burn out in the main board and get the front panel without +12V, that not a problem to the normal operation as it works on +5v, but the backlight gone off and the programmer has no power to feed from and always fails to operate.
Can you check that please? 73.
El 22/07/16 a las 09:32, Tim Billingsley escribió: I apologize for the long delay. With health issues and an amount of tracel out of the way I have just tested 4 radios. 2 TK-762 and 2 TK-762H none worked. The CHIRP options of TK-760G & TK-762G appears to read from the radio then throws the error
ERROR: Traceback (most recent call last):
self.__radio.sync_in()File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 410, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 254, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 226, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None
ERROR: ----------------------------
-- 73 Pavel CO7WT.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tim at kd5ckp@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- 73 Pavel CO7WT.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jon at savageman208@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jon at savageman208@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Refer to: http://www.miklor.com/COM/UV_ErrorMess.php
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jon S Sent: Thursday, August 11, 2016 6:17 PM To: Jardy Dawson; Discussion of CHIRP Subject: Re: [chirp_users] Kenwood TK-762H
image1.JPG
On Aug 11, 2016, at 16:57, Jardy Dawson via chirp_users chirp_users@intrepid.danplanet.com wrote:
You don't say the error, but most problems come from having a fake Prolific chip. Go to Device Manager and check your comm port. If it says Prolific, roll your driver to 3.2.0.0. This can be found at Miklor.com.
Jardy Dawson
WA7JRD Ham Radio
Message relayed through The Senior Boston Relay Race baton pass.
On Aug 11, 2016, at 14:30, Jon S savageman208@gmail.com wrote:
anyone know why when i try to program my 857d that i get an error message when cloning?
On Wed, Aug 10, 2016 at 6:58 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote:
Hi Tim, (I was off the grid by family vacations)
If the lights are off you have 90% chance of not having power to the interface, but, if you use a USB interface it may work... I have to check in the schematics but I'm pretty sure it will work with a USB programmer.
73 Pavel CO7WT
El 08/08/16 a las 11:35, Tim Billingsley escribió:
I will check that as time allows and I bet you are correct asI do not believe any of these old men light up any longer. I will advise as time allows.
73
On Fri, Jul 22, 2016 at 4:44 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote:
Hi Tim, sorry to hear about your heard issues.
Can you please confirms that the cable interface is working? (it looks to me as a interface problem)
Also, your radios has the LCD backlight on?
There is a know issue with this radios about this: usually the kenwood interface for this radios take power from the radio not from the PC, and the power is taken from the same rail the LCD leds are powered.
For some reason with time (or a mic cable short) a medium power resistor burn out in the main board and get the front panel without +12V, that not a problem to the normal operation as it works on +5v, but the backlight gone off and the programmer has no power to feed from and always fails to operate.
Can you check that please?
73.
El 22/07/16 a las 09:32, Tim Billingsley escribió:
I apologize for the long delay. With health issues and an amount of tracel out of the way I have just tested 4 radios. 2 TK-762 and 2 TK-762H none worked. The CHIRP options of TK-760G & TK-762G appears to read from the radio then throws the error
ERROR: Traceback (most recent call last):
self.__radio.sync_in()
File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 410, in sync_in
self._mmap = do_download(self)
File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 254, in do_download
open_radio(radio)
File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 226, in open_radio
raise errors.RadioError(msg)
RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ----------------
ERROR: Clone failed: Radio refuse to enter into program mode after a few tries
ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries ---
ERROR: None
ERROR: ----------------------------
On Fri, Jul 22, 2016 at 4:44 PM, Pavel Milanes (CO7WT) pavelmc@gmail.com wrote:
There is a know issue with this radios about this: usually the kenwood interface for this radios take power from the radio not from the PC, and the power is taken from the same rail the LCD leds are powered.
For some reason with time (or a mic cable short) a medium power resistor burn out in the main board and get the front panel without +12V, that not a problem to the normal operation as it works on +5v, but the backlight gone off and the programmer has no power to feed from and always fails to operate.
Can you check that please?
Will this still be an issue if I am using a newer USB programming cable? Would it not get it's power from the USB?
participants (8)
-
Chris Petry -
clowery＠va.net -
David Marshall -
Jardy Dawson -
John LaMartina -
Jon S -
Pavel Milanes (CO7WT) -
Tim Billingsley