Hi Tim and everybody,

I had a lot of work recently and was away for a while... and now I'm paying attention to the new variants of the mobile QYT/BTECH/Juentai/Sainsonic etc mobiles that are growing like grass in the spring. (I'm in change of the communication procedures for that also...)

I will revisit the Kenwood TK-760 driver as soon as I can get free time, sorry for the delay on solving this.

73.

El 15/05/16 a las 03:27, Tim Billingsley escribió:

I have a couple of old Kenwood TK-762H transceivers. I see the issue on http://chirp.danplanet.com/issues/3139 but I seem to be having troubles. When I attempt to read from the radio using TK-762G it appears to read from the radio then dumps the error dialog "An error has occurred: The radio doesn't accept program mode"


ERROR: -- Exception: --
ERROR: Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run
    self.__radio.sync_in()
  File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 884, in sync_in
    self._mmap = do_download(self)
  File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 517, in do_download
    _open_radio(radio, status)
  File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 478, in _open_radio
    raise errors.RadioError("The radio doesn't accept program mode")
RadioError: The radio doesn't accept program mode

ERROR: ----------------
ERROR: Clone failed: The radio doesn't accept program mode
ERROR: --- Exception Dialog: The radio doesn't accept program mode ---
ERROR: None

ERROR: ----------------------------




If I attempt using TK-760 chirp attmpts to read and almost immediately dumps the error dialog saying "An error has occurred Radio refuse to enter into program mode after a few tries"
ERROR: ----------------------------
ERROR: -- Exception: --
ERROR: Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run
    self.__radio.sync_in()
  File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 411, in sync_in
    self._mmap = do_download(self)
  File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 255, in do_download
    open_radio(radio)
  File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 227, in open_radio
    raise errors.RadioError(msg)
RadioError: Radio refuse to enter into program mode after a few tries

ERROR: ----------------
ERROR: Clone failed: Radio refuse to enter into program mode after a few tries
ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries ---
ERROR: None

ERROR: ----------------------------

FWIW I am running 

CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700 MHz (max)
Kernel~4.2.0-34-generic i686
Mem~2035.9/3635.1MB
HDD~750.2GB(35.9% used) 

Ubuntu 15.10

CHIRP daily-20160513

GTK 2.24.28

PyGTK 2.24.0

Python 2.7.10

I am also having issues with a QTY KT8900

I have tried to follow all this has been discussed on http://chirp.danplanet.com/issues/2673 but to no avail.

 any assistance is appreciated

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Tim at kd5ckp@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com