[chirp_users] Baofeng UV-82 Offset
Hello and thank you to all who have given their experience here. The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -. However when I upload this to my radio it does not take the settings. My radio reads OFFSET 00.000 and DUPLEX "none". I just finished uninstalling, and reinstalling, CHIRP. When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio. I tried to find this already reported, but did not.
Adam T. Brady Cassia Engineered Products Corp. 1013 North Parsons Ave. Brandon FL 33510 Online: CASSIAUSA.COMhttp://www.cassiausa.com/ E-mail : adamtbrady@cassiausa.commailto:adamtbrady@cassiausa.com Office (813) 643 9696 Cell (813) 967 3925
Before uploading to CHIRP you must create an initial template by doing a Download From Radio. CHIRP supports over 60 model radios and needs to know which radio it is programming. Make updates to the template and Upload To Radio.
This can be found at http://www.miklor.com/UV5R In the software section.
I hope this helps.
Sent via iPhone6
On May 14, 2014, at 9:04 AM, Adam Brady adamtbrady@cassiausa.com wrote:
Hello and thank you to all who have given their experience here. The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -. However when I upload this to my radio it does not take the settings. My radio reads OFFSET 00.000 and DUPLEX “none”. I just finished uninstalling, and reinstalling, CHIRP. When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio. I tried to find this already reported, but did not.
Adam T. Brady Cassia Engineered Products Corp. 1013 North Parsons Ave. Brandon FL 33510 Online: CASSIAUSA.COM E-mail : adamtbrady@cassiausa.com Office (813) 643 9696 Cell (813) 967 3925
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Any chance the Anytone 3318-A will be one of those radios in the future?
Joe M.
On May 14, 2014, at 10:01 AM, John LaMartina JohnLa@usa.net wrote:
Before uploading to CHIRP you must create an initial template by doing a Download From Radio. CHIRP supports over 60 model radios and needs to know which radio it is programming. Make updates to the template and Upload To Radio.
This can be found at http://www.miklor.com/UV5R In the software section.
I hope this helps.
Sent via iPhone6
On May 14, 2014, at 9:04 AM, Adam Brady adamtbrady@cassiausa.com wrote:
Hello and thank you to all who have given their experience here. The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -. However when I upload this to my radio it does not take the settings. My radio reads OFFSET 00.000 and DUPLEX “none”. I just finished uninstalling, and reinstalling, CHIRP. When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio. I tried to find this already reported, but did not.
Adam T. Brady Cassia Engineered Products Corp. 1013 North Parsons Ave. Brandon FL 33510 Online: CASSIAUSA.COM E-mail : adamtbrady@cassiausa.com Office (813) 643 9696 Cell (813) 967 3925
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Link correction... http://www.miklor.com/UV82
Sent via iPhone6
On May 14, 2014, at 9:04 AM, Adam Brady adamtbrady@cassiausa.com wrote:
Hello and thank you to all who have given their experience here. The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -. However when I upload this to my radio it does not take the settings. My radio reads OFFSET 00.000 and DUPLEX “none”. I just finished uninstalling, and reinstalling, CHIRP. When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio. I tried to find this already reported, but did not.
Adam T. Brady Cassia Engineered Products Corp. 1013 North Parsons Ave. Brandon FL 33510 Online: CASSIAUSA.COM E-mail : adamtbrady@cassiausa.com Office (813) 643 9696 Cell (813) 967 3925
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
I reset the radio and uploaded it fresh. Then I entered the information into CHIRP and downloaded it. It still will not accept the fields.
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina Sent: Wednesday, May 14, 2014 10:03 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-82 Offset
Link correction... http://www.miklor.com/UV82
Sent via iPhone6
On May 14, 2014, at 9:04 AM, Adam Brady <adamtbrady@cassiausa.commailto:adamtbrady@cassiausa.com> wrote: Hello and thank you to all who have given their experience here. The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -. However when I upload this to my radio it does not take the settings. My radio reads OFFSET 00.000 and DUPLEX “none”. I just finished uninstalling, and reinstalling, CHIRP. When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio. I tried to find this already reported, but did not.
Adam T. Brady Cassia Engineered Products Corp. 1013 North Parsons Ave. Brandon FL 33510 Online: CASSIAUSA.COMhttp://www.cassiausa.com/ E-mail : adamtbrady@cassiausa.commailto:adamtbrady@cassiausa.com Office (813) 643 9696 Cell (813) 967 3925
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Hi,
have you tried transmitting on a channel that is supposed to have an offset? When I look at the menu setting #26 of the uv-82 I see the same value that you do, 00.000. However when I transmit on a channel of which I know I have put an offset using Chrip, I can see that the radio switches to the adjusted offset-frequency. In channel mode you can adjust (menu# 21 & 22) whether you want to the the channel name, channel# or frequency. When on frequency one can see the switch.
Cheers, Chris
On May 14, 2014, at 4:56 PM, Adam Brady adamtbrady@cassiausa.com wrote:
I reset the radio and uploaded it fresh. Then I entered the information into CHIRP and downloaded it. It still will not accept the fields.
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina Sent: Wednesday, May 14, 2014 10:03 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-82 Offset
Link correction... http://www.miklor.com/UV82
Sent via iPhone6
On May 14, 2014, at 9:04 AM, Adam Brady adamtbrady@cassiausa.com wrote:
Hello and thank you to all who have given their experience here. The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -. However when I upload this to my radio it does not take the settings. My radio reads OFFSET 00.000 and DUPLEX “none”. I just finished uninstalling, and reinstalling, CHIRP. When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio. I tried to find this already reported, but did not.
Adam T. Brady Cassia Engineered Products Corp. 1013 North Parsons Ave. Brandon FL 33510 Online: CASSIAUSA.COM E-mail : adamtbrady@cassiausa.com Office (813) 643 9696 Cell (813) 967 3925
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Adam,
Both CHIRP and your radio are working correctly.
Menu 25 (SFT-D) and menu 26 (OFFSET) only have any meaning in VFO mode. They unnecessary in MR (channel) mode because the UV-5R and its variants (including the UV-82) does not use them in this mode. Instead, memory channels store both the direct RX and TX frequencies.
Visist the UV-82 home page on the miklor.com website and look for "Menu Definitions - Detailed" to get a copy of the "Reference for UV-82 Menus". It explains the menus and shows when they are or are not active.
CHIRP lets you enter memories into the spreadsheet editor using the shift direction and offset, but it actually does the math in the background and sends the required RX and TX frequencies to the radio.
To verify all is working as it should, select a display (A or B) in MR mode that has its Memory Display Format set to FREQuency (menu 21 or menu 22) and then select a channel that has been programmed for a repeater. The currently selected display should be showing the RX frequency. Now tap the [*SCAN] key to put the radio into "reverse" mode.. An "R" should appear in the upper status display and the any display with its MDF set to FREQ should be showing the programmed TX frequency. Tap the [*SCAN] key again to exit "reverse" mode.
In MR mode the "+-" symbol is displayed to indicate that the RX and TX frequencies are different. This would be true for a repeater channel with standard offset, a split channel with an odd offset, a cross-band channel or TX inhibited channel. A separate "+" or "-" indication is only available in VFO mode when menu 25 and menu 26 are valid.
Jim KC9HI
On Wed, May 14, 2014 at 9:04 AM, Adam Brady adamtbrady@cassiausa.comwrote:
Hello and thank you to all who have given their experience here. The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -. However when I upload this to my radio it does not take the settings. My radio reads OFFSET 00.000 and DUPLEX “none”. I just finished uninstalling, and reinstalling, CHIRP. When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio. I tried to find this already reported, but did not.
*Adam T. Brady *
Cassia Engineered Products Corp.
1013 North Parsons Ave.
Brandon FL 33510
Online: *CASSIAUSA.COM http://www.cassiausa.com/*
E-mail : adamtbrady@cassiausa.com
Office (813) 643 9696
Cell (813) 967 3925
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
I was wondering if that was an issue. It seems that I can see an Rx signal but not hear it with MR, but if I switch to VFO and put it in manually I do hear it.
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Wednesday, May 14, 2014 11:08 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-82 Offset
Adam,
Both CHIRP and your radio are working correctly.
Menu 25 (SFT-D) and menu 26 (OFFSET) only have any meaning in VFO mode. They unnecessary in MR (channel) mode because the UV-5R and its variants (including the UV-82) does not use them in this mode. Instead, memory channels store both the direct RX and TX frequencies.
Visist the UV-82 home page on the miklor.comhttp://miklor.com website and look for "Menu Definitions - Detailed" to get a copy of the "Reference for UV-82 Menus". It explains the menus and shows when they are or are not active.
CHIRP lets you enter memories into the spreadsheet editor using the shift direction and offset, but it actually does the math in the background and sends the required RX and TX frequencies to the radio.
To verify all is working as it should, select a display (A or B) in MR mode that has its Memory Display Format set to FREQuency (menu 21 or menu 22) and then select a channel that has been programmed for a repeater. The currently selected display should be showing the RX frequency. Now tap the [*SCAN] key to put the radio into "reverse" mode.. An "R" should appear in the upper status display and the any display with its MDF set to FREQ should be showing the programmed TX frequency. Tap the [*SCAN] key again to exit "reverse" mode.
In MR mode the "+-" symbol is displayed to indicate that the RX and TX frequencies are different. This would be true for a repeater channel with standard offset, a split channel with an odd offset, a cross-band channel or TX inhibited channel. A separate "+" or "-" indication is only available in VFO mode when menu 25 and menu 26 are valid.
Jim KC9HI
On Wed, May 14, 2014 at 9:04 AM, Adam Brady <adamtbrady@cassiausa.commailto:adamtbrady@cassiausa.com> wrote: Hello and thank you to all who have given their experience here. The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -. However when I upload this to my radio it does not take the settings. My radio reads OFFSET 00.000 and DUPLEX “none”. I just finished uninstalling, and reinstalling, CHIRP. When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio. I tried to find this already reported, but did not.
Adam T. Brady Cassia Engineered Products Corp. 1013 North Parsons Ave. Brandon FL 33510 Online: CASSIAUSA.COMhttp://www.cassiausa.com/ E-mail : adamtbrady@cassiausa.commailto:adamtbrady@cassiausa.com Office (813) 643 9696tel:%28813%29%20643%209696 Cell (813) 967 3925tel:%28813%29%20967%203925
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
participants (5)
-
Adam Brady -
Christian Schwarz -
Jim Unroe -
John LaMartina -
MCH