[chirp_users] Setting menu empty - UV-6R
Hi Team
that's my first email on this mailling list , and nearly my first email on a mailling list :) , i hope i will not do mistakes .
My radio is a Baofeng UV-6R
I've recently installed CHIRP on a WIN7 Virtual-machine , and on my Mac . In both system i can read and right in Memory tab ( frequency , channel and so on) , no problem.
but i see a "Setting tab" , this one is completely blank . i've checked on internet and in all mods ( ie. for UV-5xx) guys are using setting to change freq. range or other stuff .. please find in attache a screenshot
any advice?
Thanks in advance Tom
On Mon, Feb 18, 2019 at 3:46 PM Thomas Marchesseau marchesseau@gmail.com wrote:
Hi Team
that's my first email on this mailling list , and nearly my first email on a mailling list :) , i hope i will not do mistakes .
My radio is a Baofeng UV-6R
I've recently installed CHIRP on a WIN7 Virtual-machine , and on my Mac . In both system i can read and right in Memory tab ( frequency , channel and so on) , no problem.
but i see a "Setting tab" , this one is completely blank . i've checked on internet and in all mods ( ie. for UV-5xx) guys are using setting to change freq. range or other stuff .. please find in attache a screenshot
any advice?
Thanks in advance Tom
Hi Tom,
Your radio has a setting that is out of range. Email me your image and I will correct it.
Jim KC9HI
HI jim,
done , see your email . thx , Tom
Le lun. 18 févr. 2019 à 22:10, Jim Unroe rock.unroe@gmail.com a écrit :
On Mon, Feb 18, 2019 at 3:46 PM Thomas Marchesseau marchesseau@gmail.com wrote:
Hi Team
that's my first email on this mailling list , and nearly my first email
on a mailling list :) , i hope i will not do mistakes .
My radio is a Baofeng UV-6R
I've recently installed CHIRP on a WIN7 Virtual-machine , and on my Mac . In both system i can read and right in Memory tab ( frequency , channel
and so on) , no problem.
but i see a "Setting tab" , this one is completely blank . i've checked on internet and in all mods ( ie. for UV-5xx) guys are
using setting to change freq. range or other stuff ..
please find in attache a screenshot
any advice?
Thanks in advance Tom
Hi Tom,
Your radio has a setting that is out of range. Email me your image and I will correct it.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Thomz0r at marchesseau@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Mon, Feb 18, 2019 at 4:37 PM Thomas Marchesseau marchesseau@gmail.com wrote:
HI jim,
done , see your email . thx , Tom
Your file has been returned. I should work for you now.
Jim
HI Jim , yes i confirm ! many thanks . i see you've updated VHF/UHF range. i've changed it to 128-176 / 384-520 like some modded UV_5R , looks like it not supported on UV6R
Tom
Le lun. 18 févr. 2019 à 23:14, Jim Unroe rock.unroe@gmail.com a écrit :
On Mon, Feb 18, 2019 at 4:37 PM Thomas Marchesseau marchesseau@gmail.com wrote:
HI jim,
done , see your email . thx , Tom
Your file has been returned. I should work for you now.
Jim _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Thomz0r at marchesseau@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
It will accept if you want to mod the driver. For example, this altered driver will allow the band limits that were being used.
With "Enable Developer Functions" enabled, load using File -> Load Module
Jim
On Mon, Feb 18, 2019 at 5:26 PM Thomas Marchesseau marchesseau@gmail.com wrote:
HI Jim , yes i confirm ! many thanks . i see you've updated VHF/UHF range. i've changed it to 128-176 / 384-520 like some modded UV_5R , looks like it not supported on UV6R
Tom
Le lun. 18 févr. 2019 à 23:14, Jim Unroe rock.unroe@gmail.com a écrit :
On Mon, Feb 18, 2019 at 4:37 PM Thomas Marchesseau marchesseau@gmail.com wrote:
HI jim,
done , see your email . thx , Tom
Your file has been returned. I should work for you now.
Jim _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Thomz0r at marchesseau@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim at rock.unroe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Hi thanks Jim ,
i just read your email but i've modded driver/uv6p.py by myself last night . I m rollbacking and use your method as the traditional way
thx Tom
Le lun. 18 févr. 2019 à 23:44, Jim Unroe rock.unroe@gmail.com a écrit :
It will accept if you want to mod the driver. For example, this altered driver will allow the band limits that were being used.
With "Enable Developer Functions" enabled, load using File -> Load Module
Jim
On Mon, Feb 18, 2019 at 5:26 PM Thomas Marchesseau marchesseau@gmail.com wrote:
HI Jim , yes i confirm ! many thanks . i see you've updated VHF/UHF range. i've changed it to 128-176 / 384-520 like some modded UV_5R , looks
like it not supported on UV6R
Tom
Le lun. 18 févr. 2019 à 23:14, Jim Unroe rock.unroe@gmail.com a écrit
:
On Mon, Feb 18, 2019 at 4:37 PM Thomas Marchesseau marchesseau@gmail.com wrote:
HI jim,
done , see your email . thx , Tom
Your file has been returned. I should work for you now.
Jim _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Thomz0r at marchesseau@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim at rock.unroe@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Thomz0r at marchesseau@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
HI again team .
how do i upload settings in radios ? it's ok for frequencies , but it makes no effect for settings ( squelch , range , etc) this is a special thing to do?
thks thomas
Le mar. 19 févr. 2019 à 12:26, Thomas Marchesseau marchesseau@gmail.com a écrit :
Hi thanks Jim ,
i just read your email but i've modded driver/uv6p.py by myself last night . I m rollbacking and use your method as the traditional way
thx Tom
Le lun. 18 févr. 2019 à 23:44, Jim Unroe rock.unroe@gmail.com a écrit :
It will accept if you want to mod the driver. For example, this altered driver will allow the band limits that were being used.
With "Enable Developer Functions" enabled, load using File -> Load Module
Jim
On Mon, Feb 18, 2019 at 5:26 PM Thomas Marchesseau marchesseau@gmail.com wrote:
HI Jim , yes i confirm ! many thanks . i see you've updated VHF/UHF range. i've changed it to 128-176 / 384-520 like some modded UV_5R , looks
like it not supported on UV6R
Tom
Le lun. 18 févr. 2019 à 23:14, Jim Unroe rock.unroe@gmail.com a
écrit :
On Mon, Feb 18, 2019 at 4:37 PM Thomas Marchesseau marchesseau@gmail.com wrote:
HI jim,
done , see your email . thx , Tom
Your file has been returned. I should work for you now.
Jim _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Thomz0r at marchesseau@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim at rock.unroe@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Thomz0r at marchesseau@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (2)
-
Jim Unroe -
Thomas Marchesseau