Hi thanks Jim ,

i just read your email  but i've modded  driver/uv6p.py by myself last night  .  

I m rollbacking and use your method as the traditional  way 

thx 

Tom 

Le lun. 18 févr. 2019 à 23:44, Jim Unroe <rock.unroe@gmail.com> a écrit :

It will accept if you want to mod the driver. For example, this
altered driver will allow the band limits that were being used.

With "Enable Developer Functions" enabled, load using File -> Load Module

Jim

On Mon, Feb 18, 2019 at 5:26 PM Thomas Marchesseau
<marchesseau@gmail.com> wrote:
>
> HI Jim ,
> yes i confirm !
> many thanks .
> i see you've updated  VHF/UHF range.
> i've changed  it to  128-176 / 384-520 like some modded UV_5R  , looks like it not supported on UV6R
>
> Tom
>
> Le lun. 18 févr. 2019 à 23:14, Jim Unroe <rock.unroe@gmail.com> a écrit :
>>
>> On Mon, Feb 18, 2019 at 4:37 PM Thomas Marchesseau
>> <marchesseau@gmail.com> wrote:
>> >
>> > HI jim,
>> >
>> > done , see your email .
>> > thx , Tom
>> >
>> Your file has been returned. I should work for you now.
>>
>> Jim
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Thomz0r at marchesseau@gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jim at rock.unroe@gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Thomz0r at marchesseau@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com