[chirp_users] BaoFeng BF-F8+ issue
I'm attempting to program a second BF-F8+ radio identical to my first one, but no matter what I try I can not get the power on beep to turn off. I have verified all settings in CHIRP to be correct, as well as those in the radio (to the best of my knowledge). One radio does not beep on power up (which is what I prefer), the other does. Any suggestions?
have u tried reading the non beeper and then writing that into the beeper. does that work?
________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Chase Bolyard cowboyona426@gmail.com Sent: 17 November 2017 05:23 To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] BaoFeng BF-F8+ issue
I'm attempting to program a second BF-F8+ radio identical to my first one, but no matter what I try I can not get the power on beep to turn off. I have verified all settings in CHIRP to be correct, as well as those in the radio (to the best of my knowledge). One radio does not beep on power up (which is what I prefer), the other does. Any suggestions?
I copied the channels from the non beeper into the beeper radios file. Made all settings match in CHIRP on all option tabs, and made all settings in both radios match as well. Issue persists
On Nov 16, 2017 9:51 PM, "Neil B" ne.b@hotmail.co.uk wrote:
have u tried reading the non beeper and then writing that into the beeper. does that work?
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of Chase Bolyard < cowboyona426@gmail.com> *Sent:* 17 November 2017 05:23 *To:* chirp_users@intrepid.danplanet.com *Subject:* [chirp_users] BaoFeng BF-F8+ issue
I'm attempting to program a second BF-F8+ radio identical to my first one, but no matter what I try I can not get the power on beep to turn off. I have verified all settings in CHIRP to be correct, as well as those in the radio (to the best of my knowledge). One radio does not beep on power up (which is what I prefer), the other does. Any suggestions?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cowboyona426@gmail.com at cowboyona426@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
i mean use the non beeper image and write that into beeper. not manually copy settings :-)
________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Chase Bolyard cowboyona426@gmail.com Sent: 17 November 2017 06:02 To: Discussion of CHIRP Subject: Re: [chirp_users] BaoFeng BF-F8+ issue
I copied the channels from the non beeper into the beeper radios file. Made all settings match in CHIRP on all option tabs, and made all settings in both radios match as well. Issue persists
On Nov 16, 2017 9:51 PM, "Neil B" <ne.b@hotmail.co.ukmailto:ne.b@hotmail.co.uk> wrote:
have u tried reading the non beeper and then writing that into the beeper. does that work?
________________________________ From: chirp_users-bounces@intrepid.danplanet.commailto:chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.commailto:chirp_users-bounces@intrepid.danplanet.com> on behalf of Chase Bolyard <cowboyona426@gmail.commailto:cowboyona426@gmail.com> Sent: 17 November 2017 05:23 To: chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com Subject: [chirp_users] BaoFeng BF-F8+ issue
I'm attempting to program a second BF-F8+ radio identical to my first one, but no matter what I try I can not get the power on beep to turn off. I have verified all settings in CHIRP to be correct, as well as those in the radio (to the best of my knowledge). One radio does not beep on power up (which is what I prefer), the other does. Any suggestions?
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_usershttps://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7Cne.b%40hotmail.co.uk%7C8b2e6d9dccd24539f91408d52d80d1f2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636464953650946526&sdata=P1J1fsfNlTpFHCI6IfqHQPqFwi%2BQkCBqWoNx9XqZYTU%3D&reserved=0 This message was sent to cowboyona426@gmail.commailto:cowboyona426@gmail.com at cowboyona426@gmail.commailto:cowboyona426@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
In the past I've not had any luck trying to do that due to different firmware versions
On Nov 16, 2017 11:35 PM, "Neil B" ne.b@hotmail.co.uk wrote:
i mean use the non beeper image and write that into beeper. not manually copy settings :-)
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of Chase Bolyard < cowboyona426@gmail.com> *Sent:* 17 November 2017 06:02 *To:* Discussion of CHIRP *Subject:* Re: [chirp_users] BaoFeng BF-F8+ issue
I copied the channels from the non beeper into the beeper radios file. Made all settings match in CHIRP on all option tabs, and made all settings in both radios match as well. Issue persists
On Nov 16, 2017 9:51 PM, "Neil B" ne.b@hotmail.co.uk wrote:
have u tried reading the non beeper and then writing that into the beeper. does that work?
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of Chase Bolyard < cowboyona426@gmail.com> *Sent:* 17 November 2017 05:23 *To:* chirp_users@intrepid.danplanet.com *Subject:* [chirp_users] BaoFeng BF-F8+ issue
I'm attempting to program a second BF-F8+ radio identical to my first one, but no matter what I try I can not get the power on beep to turn off. I have verified all settings in CHIRP to be correct, as well as those in the radio (to the best of my knowledge). One radio does not beep on power up (which is what I prefer), the other does. Any suggestions?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7Cne.b%40hotmail.co.uk%7C8b2e6d9dccd24539f91408d52d80d1f2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636464953650946526&sdata=P1J1fsfNlTpFHCI6IfqHQPqFwi%2BQkCBqWoNx9XqZYTU%3D&reserved=0 This message was sent to cowboyona426@gmail.com at cowboyona426@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cowboyona426@gmail.com at cowboyona426@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
ahh i was going on the comment prios that you mentioned they were identical radios. as you say fw would prevent that working.
________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Chase Bolyard cowboyona426@gmail.com Sent: 17 November 2017 15:28 To: Discussion of CHIRP Subject: Re: [chirp_users] BaoFeng BF-F8+ issue
In the past I've not had any luck trying to do that due to different firmware versions
On Nov 16, 2017 11:35 PM, "Neil B" <ne.b@hotmail.co.ukmailto:ne.b@hotmail.co.uk> wrote:
i mean use the non beeper image and write that into beeper. not manually copy settings :-)
________________________________ From: chirp_users-bounces@intrepid.danplanet.commailto:chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.commailto:chirp_users-bounces@intrepid.danplanet.com> on behalf of Chase Bolyard <cowboyona426@gmail.commailto:cowboyona426@gmail.com> Sent: 17 November 2017 06:02 To: Discussion of CHIRP Subject: Re: [chirp_users] BaoFeng BF-F8+ issue
I copied the channels from the non beeper into the beeper radios file. Made all settings match in CHIRP on all option tabs, and made all settings in both radios match as well. Issue persists
On Nov 16, 2017 9:51 PM, "Neil B" <ne.b@hotmail.co.ukmailto:ne.b@hotmail.co.uk> wrote:
have u tried reading the non beeper and then writing that into the beeper. does that work?
________________________________ From: chirp_users-bounces@intrepid.danplanet.commailto:chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.commailto:chirp_users-bounces@intrepid.danplanet.com> on behalf of Chase Bolyard <cowboyona426@gmail.commailto:cowboyona426@gmail.com> Sent: 17 November 2017 05:23 To: chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com Subject: [chirp_users] BaoFeng BF-F8+ issue
I'm attempting to program a second BF-F8+ radio identical to my first one, but no matter what I try I can not get the power on beep to turn off. I have verified all settings in CHIRP to be correct, as well as those in the radio (to the best of my knowledge). One radio does not beep on power up (which is what I prefer), the other does. Any suggestions?
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_usershttps://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7Cne.b%40hotmail.co.uk%7C8b2e6d9dccd24539f91408d52d80d1f2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636464953650946526&sdata=P1J1fsfNlTpFHCI6IfqHQPqFwi%2BQkCBqWoNx9XqZYTU%3D&reserved=0 This message was sent to cowboyona426@gmail.commailto:cowboyona426@gmail.com at cowboyona426@gmail.commailto:cowboyona426@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_usershttps://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7Cne.b%40hotmail.co.uk%7Ceff8c9c119db4bfe8ac208d52dcfdadb%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636465293124870279&sdata=VuaxpZiBl2ns8Q1znwgkuo3InWVFobDIC9bpzpeAwR4%3D&reserved=0 This message was sent to cowboyona426@gmail.commailto:cowboyona426@gmail.com at cowboyona426@gmail.commailto:cowboyona426@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
Sorry, identical models yes but different firmware versions.
On Nov 17, 2017 7:57 AM, "Neil B" ne.b@hotmail.co.uk wrote:
ahh i was going on the comment prios that you mentioned they were identical radios. as you say fw would prevent that working.
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of Chase Bolyard < cowboyona426@gmail.com> *Sent:* 17 November 2017 15:28 *To:* Discussion of CHIRP *Subject:* Re: [chirp_users] BaoFeng BF-F8+ issue
In the past I've not had any luck trying to do that due to different firmware versions
On Nov 16, 2017 11:35 PM, "Neil B" ne.b@hotmail.co.uk wrote:
i mean use the non beeper image and write that into beeper. not manually copy settings :-)
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of Chase Bolyard < cowboyona426@gmail.com> *Sent:* 17 November 2017 06:02 *To:* Discussion of CHIRP *Subject:* Re: [chirp_users] BaoFeng BF-F8+ issue
I copied the channels from the non beeper into the beeper radios file. Made all settings match in CHIRP on all option tabs, and made all settings in both radios match as well. Issue persists
On Nov 16, 2017 9:51 PM, "Neil B" ne.b@hotmail.co.uk wrote:
have u tried reading the non beeper and then writing that into the beeper. does that work?
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of Chase Bolyard < cowboyona426@gmail.com> *Sent:* 17 November 2017 05:23 *To:* chirp_users@intrepid.danplanet.com *Subject:* [chirp_users] BaoFeng BF-F8+ issue
I'm attempting to program a second BF-F8+ radio identical to my first one, but no matter what I try I can not get the power on beep to turn off. I have verified all settings in CHIRP to be correct, as well as those in the radio (to the best of my knowledge). One radio does not beep on power up (which is what I prefer), the other does. Any suggestions?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7Cne.b%40hotmail.co.uk%7C8b2e6d9dccd24539f91408d52d80d1f2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636464953650946526&sdata=P1J1fsfNlTpFHCI6IfqHQPqFwi%2BQkCBqWoNx9XqZYTU%3D&reserved=0 This message was sent to cowboyona426@gmail.com at cowboyona426@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7Cne.b%40hotmail.co.uk%7Ceff8c9c119db4bfe8ac208d52dcfdadb%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636465293124870279&sdata=VuaxpZiBl2ns8Q1znwgkuo3InWVFobDIC9bpzpeAwR4%3D&reserved=0 This message was sent to cowboyona426@gmail.com at cowboyona426@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cowboyona426@gmail.com at cowboyona426@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
On Fri, Nov 17, 2017 at 12:23 AM, Chase Bolyard cowboyona426@gmail.com wrote:
I'm attempting to program a second BF-F8+ radio identical to my first one, but no matter what I try I can not get the power on beep to turn off. I have verified all settings in CHIRP to be correct, as well as those in the radio (to the best of my knowledge). One radio does not beep on power up (which is what I prefer), the other does. Any suggestions?
All of the UV-5R style radio beep when power on and it can't be disabled. So the reality of it is that the one that doesn't beep is broken. ;-)
Jim KC9HI
participants (3)
-
Chase Bolyard -
Jim Unroe -
Neil B