I copied the channels from the non beeper into the beeper radios file. Made all settings match in CHIRP on all option tabs, and made all settings in both radios match as well. Issue persists

On Nov 16, 2017 9:51 PM, "Neil B" <ne.b@hotmail.co.uk> wrote:

have u tried reading the non beeper and then writing that into the beeper. does that work?



From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> on behalf of Chase Bolyard <cowboyona426@gmail.com>
Sent: 17 November 2017 05:23
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] BaoFeng BF-F8+ issue
 
I'm attempting to program a second BF-F8+ radio identical to my first one, but no matter what I try I can not get the power on beep to turn off.  I have verified all settings in CHIRP to be correct, as well as those in the radio (to the best of my knowledge).  One radio does not beep on power up (which is what I prefer), the other does.  Any suggestions?

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to cowboyona426@gmail.com at cowboyona426@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com