Steve Prime, Uv82S35 is a different program than Chirp. It is the Baofeng software, available on Btech and other sites. Go to https://chirp.danplanet.com/projects/chirp/wiki/Download and download the version of Chirp that works with your operating system.

Gary Craig KI5CCD Maintenance Webco Distribution Texas 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext.107 Fax 918-246-7045 gcraig@webcoindustries.commailto:gcraig@webcoindustries.com

From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of D.J.J. Ring, Jr. Sent: Friday, June 7, 2019 7:42 AM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Second Attempt cant program my radio

This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious What radio do you have? Is it supported? What Operating System are you using? What USB port have you selected?

73 David N1EA On Wed, Jun 5, 2019, 20:53 <gearjam@ken-tennwireless.commailto:gearjam@ken-tennwireless.com> wrote: I bought $20.00 program cable from Amazon. Had to download driver CDM v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read data from radio" a small window opens that says "Read data from radio" with three tabs, "Read", "Cancel" and "Help". When I click on Read I get another small window that says "Operation Prompt" with the message "! Fail connect with transceiver". When I click on Help nothing happens. Cable is firmly plugged into radio to the second click. Tried dampening the pins for a better connection as per the Baofeng instructions. I've also tried the radio on both channel mode and frequency mode. Checked Miklor.com to no avail. I accidently keyed the PPT button and heard a buzz from my computer speakers so I believe I have a connection with the cable. Any advice??????? Steve Prime _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.netmailto:n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com