Steve Prime,
Uv82S35 is a different program than Chirp. It is the Baofeng software, available on Btech and other
sites. Go to
https://chirp.danplanet.com/projects/chirp/wiki/Download and download the version of Chirp that works with your operating system.
Gary Craig KI5CCD
Maintenance
Webco Distribution Texas
750 Martin Luther King Jr Dr
Orange, TX 77630-3094
409-886-0807 ext.107
Fax 918-246-7045
From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com>
On Behalf Of D.J.J. Ring, Jr.
Sent: Friday, June 7, 2019 7:42 AM
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Subject: Re: [chirp_users] Second Attempt cant program my radio
|
This email originated from an external sender. Use caution when following links or opening
attachments as they could be malicious |
What radio do you have? Is it supported? What Operating System are you using? What USB port have you selected?
73
David
N1EA
On Wed, Jun 5, 2019, 20:53 <gearjam@ken-tennwireless.com> wrote:
I bought $20.00 program cable from Amazon. Had to download driver CDM
v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read
data from radio" a small window opens that says "Read data from radio"
with three tabs, "Read", "Cancel" and "Help". When I click on Read I get
another small window that says "Operation Prompt" with the message "!
Fail connect with transceiver". When I click on Help nothing happens.
Cable is firmly plugged into radio to the second click. Tried dampening
the pins for a better connection as per the Baofeng instructions. I've
also tried the radio on both channel mode and frequency mode. Checked
Miklor.com to no avail. I accidently keyed the PPT button and heard a
buzz from my computer speakers so I believe I have a connection with the
cable. Any advice???????
Steve Prime
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com