[chirp_users] How do I ensure that I don't TX on a memory slot? Baofeng UV-5RX3
I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)? — With greatest regards, Geordon Shōshin 正心 VanTassle
In chirp I believe it is the duplex column. Set it to none
Bruce Coneby
On Jun 23, 2021, at 4:46 AM, Geordon Shoshin VanTassle gvantass@gmail.com wrote:
I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)? — With greatest regards, Geordon Shōshin 正心 VanTassle
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bruce Coneby at brucon2011@icloud.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
None in the Duplex column means Simplex. Off in the Duplex column should mean RX only.
Joe Pizzi KI5LST
On 6/23/2021 4:05 AM, Bruce Coneby via chirp_users wrote:
In chirp I believe it is the duplex column. Set it to none
Bruce Coneby
On Jun 23, 2021, at 4:46 AM, Geordon Shoshin VanTassle gvantass@gmail.com wrote:
I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)? — With greatest regards, Geordon Shōshin 正心 VanTassle
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bruce Coneby at brucon2011@icloud.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi at pizzi.joe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Section 6 of tis link will direct you to Guides and Examples for CHIRP. https://www.miklor.com/COM/UV_CHIRP.php
Stay safe and healthy. John K3NXU
www.Miklor.com www.Miklor.com/DMR/ www.Miklor.com/GMRS/
On Jun 23, 2021, at 4:46 AM, Geordon Shoshin VanTassle gvantass@gmail.com wrote:
I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)? — With greatest regards, Geordon Shōshin 正心 VanTassle
Joe is correct select off in the dropdown for TX off.
Bruce Coneby brucon2011@icloud.com
On Jun 23, 2021, at 7:34 AM, John La JohnLa@usa.net wrote:
Section 6 of tis link will direct you to Guides and Examples for CHIRP. https://www.miklor.com/COM/UV_CHIRP.php
Stay safe and healthy. John K3NXU
www.Miklor.com www.Miklor.com/DMR/ www.Miklor.com/GMRS/
On Jun 23, 2021, at 4:46 AM, Geordon Shoshin VanTassle gvantass@gmail.com wrote:
I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)? — With greatest regards, Geordon Shōshin 正心 VanTassle
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bruce Coneby at brucon2011@icloud.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I wasn't aware of that setting, I had used BCL - busy channel lockout previously (my local first responders are still using UHF FM radios).
That Miklor CHIRP guide is very useful - I wasn't previously aware of it.
Thanks,
Ken, N2VIP
On Jun 23, 2021, at 08:38, Bruce Coneby via chirp_users chirp_users@intrepid.danplanet.com wrote:
Joe is correct select off in the dropdown for TX off.
Bruce Coneby brucon2011@icloud.com
On Jun 23, 2021, at 7:34 AM, John La JohnLa@usa.net wrote:
Section 6 of tis link will direct you to Guides and Examples for CHIRP. https://www.miklor.com/COM/UV_CHIRP.php
Stay safe and healthy. John K3NXU
www.Miklor.com www.Miklor.com/DMR/ www.Miklor.com/GMRS/
On Jun 23, 2021, at 4:46 AM, Geordon Shoshin VanTassle gvantass@gmail.com wrote:
I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)? — With greatest regards, Geordon Shōshin 正心 VanTassle
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bruce Coneby at brucon2011@icloud.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On 2021-06-23 14:45, Ken Hansen wrote:
I wasn't aware of that setting, I had used BCL - busy channel lockout previously
snip
Ken, N2VIP
Interesting hack. Thanks for the idea.
Classically Busy Channel Lock is used if there are multiple users of a frequency. Typically ones one may not hear due to use of CTCSS/DCS to only filter for what you'd like.
This needn't always mean different _users_, it can mean different uses. One example local to me is on one amateur radio repeater. It's both analogue FM voice repeater and also Yaesu Fusion (a digital voice mode.) The analogue FM repeater TX a CTCSS tone that analogue users enable as Tone Squelch to they needn't listen to the brraaaap of the digital voice.
One should look at the rig before transmitting in analogue FM as one may interfere with a conversation/TX in Fusion. That or enable Busy Channel Lockout.
Another example here are two analogue FM amateur radio repeaters on a SNP (Shared Non-Protected) frequency pair. They use different tones (CTCSS) on the input/output. If one only listens to one (doesn't wish to hear the other) then it's good practise to either look at lights/meters, or crack the squelch or Monitor button before transmitting. One may also simply enable Busy Channel Lockout.
Cheers es 73, John
Perfect! Thank you all, especially for the pointer to the milker.com examples page! That’s going to make some good reading. — With greatest regards, Geordon Shōshin 正心 VanTassle
Woa, that's useful!
Is there a pdf version anywhere that I could print out?
-- Scott Atkins Burbank, CA USA
On Wed, Jun 23, 2021 at 4:34 AM John La JohnLa@usa.net wrote:
Section 6 of tis link will direct you to Guides and Examples for CHIRP. https://www.miklor.com/COM/UV_CHIRP.php
Stay safe and healthy. John K3NXU
www.Miklor.com www.Miklor.com/DMR/ www.Miklor.com/GMRS/
On Jun 23, 2021, at 4:46 AM, Geordon Shoshin VanTassle gvantass@gmail.com wrote:
I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)? — With greatest regards, Geordon Shōshin 正心 VanTassle
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Akin at akinius@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Wed, Jun 23, 2021 at 10:34 AM Scott S. Atkins akinius@gmail.com wrote:
Woa, that's useful!
Is there a pdf version anywhere that I could print out?
-- Scott Atkins Burbank, CA USA
Scott,
Just click the image to bring up the full resolution image. Then right-click and choose "Save Image As..." to save the JPG image to your computer. You can then load it into a program such as MS Paint to embellish if needed and print.
Or if you want the whole Miklor "CHIRP Programming Examples" page, choose to print the page from within your browser (the CTRL+P keyboard shortcut should work) and then choose "Save to PDF", "Microsoft Print to PDF" or something similar as the output "Destination".
Jim KC9HI
It seems to be text, not an image.
And yeah you can print the page, but that's always messy and includes ads and stuff on the side.
I may just manually copy it and paste it into a .doc and work with it that way if there's no downloadable vesion.
-- Scott Atkins Burbank, CA USA
On Wed, Jun 23, 2021 at 11:00 AM Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jun 23, 2021 at 10:34 AM Scott S. Atkins akinius@gmail.com wrote:
Woa, that's useful!
Is there a pdf version anywhere that I could print out?
-- Scott Atkins Burbank, CA USA
Scott,
Just click the image to bring up the full resolution image. Then right-click and choose "Save Image As..." to save the JPG image to your computer. You can then load it into a program such as MS Paint to embellish if needed and print.
Or if you want the whole Miklor "CHIRP Programming Examples" page, choose to print the page from within your browser (the CTRL+P keyboard shortcut should work) and then choose "Save to PDF", "Microsoft Print to PDF" or something similar as the output "Destination".
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Akin at akinius@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Wed, Jun 23, 2021 at 2:16 PM Scott S. Atkins akinius@gmail.com wrote:
It seems to be text, not an image.
And yeah you can print the page, but that's always messy and includes ads and stuff on the side.
I may just manually copy it and paste it into a .doc and work with it that way if there's no downloadable vesion.
-- Scott Atkins Burbank, CA USA
Yeah, there was never an "original" document created. This was just the result of an email exchange between John and me back in 2012 for which I furnished the original example text and corresponding JPG image. John then formatted it to be consistent with his website.
Jim KC9HI
Sure would be nice eh? Open frequencies tx or rx in any spectrum is always controlled by you, period.
On Jun 23, 2021, at 05:29, Joe Pizzi pizzi.joe@gmail.com wrote:
None in the Duplex column means Simplex. Off in the Duplex column should mean RX only.
Joe Pizzi KI5LST
On 6/23/2021 4:05 AM, Bruce Coneby via chirp_users wrote: In chirp I believe it is the duplex column. Set it to none
Bruce Coneby
On Jun 23, 2021, at 4:46 AM, Geordon Shoshin VanTassle gvantass@gmail.com wrote:
I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)? — With greatest regards, Geordon Shōshin 正心 VanTassle
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bruce Coneby at brucon2011@icloud.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi at pizzi.joe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- Joe Pizzi
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David at maihofer.david@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Fortunately, I am old enough and wise enough to know that human beings are not perfect and errors can happen with even the most careful of intents, so I like to err on the side of caution. Fail-safe, as it were.
— With greatest regards, Geordon Shōshin 正心 VanTassle
iPhone, iTypo, iSorry
________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of David Maihofer maihofer.david@gmail.com Sent: Wednesday, June 23, 2021 11:04:19 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] How do I ensure that I don't TX on a memory slot? Baofeng UV-5RX3
Sure would be nice eh? Open frequencies tx or rx in any spectrum is always controlled by you, period.
On Jun 23, 2021, at 05:29, Joe Pizzi pizzi.joe@gmail.com wrote:
None in the Duplex column means Simplex. Off in the Duplex column should mean RX only.
Joe Pizzi KI5LST
On 6/23/2021 4:05 AM, Bruce Coneby via chirp_users wrote: In chirp I believe it is the duplex column. Set it to none
Bruce Coneby
On Jun 23, 2021, at 4:46 AM, Geordon Shoshin VanTassle gvantass@gmail.com wrote:
I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)? — With greatest regards, Geordon Shōshin 正心 VanTassle
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bruce Coneby at brucon2011@icloud.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Pizzi at pizzi.joe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- Joe Pizzi
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David at maihofer.david@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Geordon VanTassle at gvantass@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (9)
-
Bruce Coneby -
David Maihofer -
Geordon Shoshin VanTassle -
Jim Unroe -
Joe Pizzi -
John La -
Ken Hansen -
Scott S. Atkins -
VA7OTC John Erskine