Fortunately, I am old enough and wise enough to know that human beings are not perfect and errors can happen with even the most careful of intents, so I like to err on the side of caution. Fail-safe, as it were.

— 
With greatest regards,
Geordon Shōshin 正心 VanTassle

iPhone, iTypo, iSorry

 
From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> on behalf of David Maihofer <maihofer.david@gmail.com>
Sent: Wednesday, June 23, 2021 11:04:19 PM
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Subject: Re: [chirp_users] How do I ensure that I don't TX on a memory slot? Baofeng UV-5RX3
 
Sure would be nice eh?
Open frequencies tx or rx in any spectrum is always controlled by you, period.

> On Jun 23, 2021, at 05:29, Joe Pizzi <pizzi.joe@gmail.com> wrote:
>
> None in the Duplex column means Simplex. Off in the Duplex column should
> mean RX only.
>
> Joe Pizzi
> KI5LST
>
>> On 6/23/2021 4:05 AM, Bruce Coneby via chirp_users wrote:
>> In chirp I believe it is the duplex column.  Set it to none
>>
>> Bruce Coneby
>>
>>>> On Jun 23, 2021, at 4:46 AM, Geordon Shoshin VanTassle <gvantass@gmail.com> wrote:
>>>
>>> I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)?
>>> —
>>> With greatest regards,
>>> Geordon Shōshin 正心 VanTassle
>>>
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Bruce Coneby at brucon2011@icloud.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Joe Pizzi at pizzi.joe@gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
>
> --
> Joe Pizzi
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to David  at maihofer.david@gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Geordon  VanTassle  at gvantass@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com