[chirp_users] New Chirp User ???
I'm a new user to Chirp & have a Baofeng UV-5RA (BFB297). I'm using the Chirp Daily Build from 20130111. A few questions: --Is the Freq. on the spreadsheet the TX or the RX Freq.? --On all Channels but where I've put a Tone of 151.4, it displays 88.5, --Also shows 88.5 on ToneSql, 023 in DTCS Code & DTCS RX Code, --What is DTCS Pol which shows NN on all channels, --Is there a source I'm not aware of that explains the meaning of each Column? Some like Name, Tone Mode, Duplex, Offset, Mode, Power, & Skip I know but others I don't. 73s & thanks, Bill
Hi Bill, Visit the Miklor website ( miklor.com/uv5r/ you will be redirected to http://uv5r.99k.org/) and then access the "CHIRP Software & FAQs" page. On that page there are links to a CHIRP Guide and a CHIRP Examples page. I am in the process of updating the guide, but it sill still answer a lot of your questions. Jim KC9HI
On Mon, Jan 14, 2013 at 4:04 PM, Bill Gabbard wcgabbard1@windstream.netwrote:
** *I'm a new user to Chirp & have a Baofeng UV-5RA (BFB297). I'm using the Chirp Daily Build from 20130111. A few questions:* *--Is the Freq. on the spreadsheet the TX or the RX Freq.?* *--On all Channels but where I've put a Tone of 151.4, it displays 88.5,* *--Also shows 88.5 on ToneSql, 023 in DTCS Code & DTCS RX Code,* *--What is DTCS Pol which shows NN on all channels,* *--Is there a source I'm not aware of that explains the meaning of each Column? Some like Name, Tone Mode, Duplex, Offset, Mode, Power, & Skip I know but others I don't.* *73s & thanks,* *Bill*
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
participants (2)
-
Bill Gabbard -
Jim Unroe