Hi Bill,
Visit the Miklor website ( miklor.com/uv5r/ you will be redirected to http://uv5r.99k.org/) and then access the "CHIRP Software & FAQs" page. On that page there are links to a CHIRP Guide and a CHIRP Examples page. I am in the process of updating the guide, but it sill still answer a lot of your questions.
Jim KC9HI

On Mon, Jan 14, 2013 at 4:04 PM, Bill Gabbard <wcgabbard1@windstream.net> wrote:
I'm a new user to Chirp & have a Baofeng UV-5RA (BFB297).  I'm using the Chirp Daily Build from 20130111.  A few questions:
--Is the Freq. on the spreadsheet the TX or the RX Freq.?
--On all Channels but where I've put a Tone of 151.4, it displays 88.5,
--Also shows 88.5 on ToneSql, 023 in DTCS Code & DTCS RX Code,
--What is DTCS Pol which shows NN on all channels,
--Is there a source I'm not aware of that explains the meaning of each Column?  Some like Name, Tone Mode, Duplex, Offset, Mode, Power, & Skip I know but others I don't.
73s & thanks,
Bill

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users