[chirp_users] "Radio did not respond" msg
Rookie Chirp user, did not find any info about this problem in FAQs and elsewhere:
Shortly after cloning starts, message is Error ... Radio did not respond
Using: CHIRP daily-20140324 Win XP SP3 fully patched and upgraded Baofeng UV-5RE Plus, brand new [first radio ever for me] Radio works, AFAICT, I'm trying to use CHIRP to program it. Programming cable: USB Programming Cable for Baofeng UV-5R UV-3R+ Two way Radio With Driver CD http://www.amazon.com/gp/r.html?R=AITKF9BI4M76&C=3T5MUR8F9569O&H=WGEMUHFYJYJD4RYOQCPU9WRTIRGA&T=C&U=http%3A%2F%2Fwww.amazon.com%2Fdp%2FB008RZJHJU%2Fref%3Dpe_385040_30332200_pe_309540_26725410_item -- Sold by Ham Radio Storehttp://www.amazon.com/gp/r.html?R=AITKF9BI4M76&C=3T5MUR8F9569O&H=SMNVNAEYAHLOV121RML4GSRECXOA&T=C&U=http%3A%2F%2Fwww.amazon.com%2Fgp%2Fhelp%2Fseller%2Fhome.html%2Fref%3Dpe_385040_30332200_pe_309540_26725410_seller%3Fie%3DUTF8%26seller%3DA2F0DDSKJCG9D7
Following these instructions from CHIRP Radio tab: Baofeng UV-5R Instructions 1. Turn radio off. 2. Connect cable to mic/spkr connector. 3. Make sure connector is firmly connected. 4. Turn radio on. 5. Ensure that the radio is tuned to channel with no activity. 6. Click OK to download image from device.
Have tried the instructions in both Frequency Mode and Channel Mode
Thanks for any guidance you can offer.
/scmiller40@gmail.com
For error message definition, refer to http://www.miklor.com Look under Common Error Messages
This should put you in the right direction. John K3NXU Http://www.miklor.com/uv5r
On Mar 27, 2014, at 1:41 PM, Pete Miller scmiller40@gmail.com wrote:
Rookie Chirp user, did not find any info about this problem in FAQs and elsewhere:
Shortly after cloning starts, message is Error ... Radio did not respond
Using: CHIRP daily-20140324 Win XP SP3 fully patched and upgraded Baofeng UV-5RE Plus, brand new [first radio ever for me] Radio works, AFAICT, I'm trying to use CHIRP to program it. Programming cable: USB Programming Cable for Baofeng UV-5R UV-3R+ Two way Radio With Driver CD -- Sold by Ham Radio Store
Following these instructions from CHIRP Radio tab: Baofeng UV-5R Instructions
- Turn radio off.
- Connect cable to mic/spkr connector.
- Make sure connector is firmly connected.
- Turn radio on.
- Ensure that the radio is tuned to channel with no activity.
- Click OK to download image from device.
Have tried the instructions in both Frequency Mode and Channel Mode
Thanks for any guidance you can offer.
/scmiller40@gmail.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Thanks for the tips. They led me in the right direction. My problem happened to be that CHIRP was trying to reach the radio on COM1 although the driver is actually on COM3. I didn't notice the COM1 detail until I'd checked everything else, but I learned some useful stuff in the process of doing that.
On Thu, Mar 27, 2014 at 2:01 PM, John LaMartina ☀ JohnLa@usa.net wrote:
For error message definition, refer to http://www.miklor.com Look under Common Error Messages
This should put you in the right direction. John K3NXU Http://www.miklor.com/uv5r
On Mar 27, 2014, at 1:41 PM, Pete Miller scmiller40@gmail.com wrote:
Rookie Chirp user, did not find any info about this problem in FAQs and elsewhere:
Shortly after cloning starts, message is Error ... Radio did not respond
Using: CHIRP daily-20140324 Win XP SP3 fully patched and upgraded Baofeng UV-5RE Plus, brand new [first radio ever for me] Radio works, AFAICT, I'm trying to use CHIRP to program it. Programming cable: USB Programming Cable for Baofeng UV-5R UV-3R+ Two way Radio With Driver CD http://www.amazon.com/gp/r.html?R=AITKF9BI4M76&C=3T5MUR8F9569O&H=WGEMUHFYJYJD4RYOQCPU9WRTIRGA&T=C&U=http%3A%2F%2Fwww.amazon.com%2Fdp%2FB008RZJHJU%2Fref%3Dpe_385040_30332200_pe_309540_26725410_item -- Sold by Ham Radio Storehttp://www.amazon.com/gp/r.html?R=AITKF9BI4M76&C=3T5MUR8F9569O&H=SMNVNAEYAHLOV121RML4GSRECXOA&T=C&U=http%3A%2F%2Fwww.amazon.com%2Fgp%2Fhelp%2Fseller%2Fhome.html%2Fref%3Dpe_385040_30332200_pe_309540_26725410_seller%3Fie%3DUTF8%26seller%3DA2F0DDSKJCG9D7
Following these instructions from CHIRP Radio tab: Baofeng UV-5R Instructions
- Turn radio off.
- Connect cable to mic/spkr connector.
- Make sure connector is firmly connected.
- Turn radio on.
- Ensure that the radio is tuned to channel with no activity.
- Click OK to download image from device.
Have tried the instructions in both Frequency Mode and Channel Mode
Thanks for any guidance you can offer.
/scmiller40@gmail.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
participants (2)
-
John LaMartina ☀ -
Pete Miller