Hello,
I have 2 UV-5R's, Baofeng, which I am attempting to program with a linux, Zorinos, and a Retevis cable, which I bought with the radios. I have programmed these radios before using a windows laptop. Now I am unable to get the radio to communicate with CHIRP. It goes into clone mode and then I get a "Radio did not respond" error message. This is using /dev/ttyS4, which is the first one I got a response from. I am very much the n00b to linux and CHIRP and could use some clear directions please.
Thank you,
In the list of ports look for something like ttyUSB0...and use that one. Roger G3YTN
Get BlueMail for Android
On 17 Mar 2020, 16:39, at 16:39, Joel Leland jfleland@gmail.com wrote:
Hello,
I have 2 UV-5R's, Baofeng, which I am attempting to program with a linux, Zorinos, and a Retevis cable, which I bought with the radios. I have programmed these radios before using a windows laptop. Now I am unable to get the radio to communicate with CHIRP. It goes into clone mode and then I get a "Radio did not respond" error message. This is using /dev/ttyS4, which is the first one I got a response from. I am very much the n00b to linux and CHIRP and could use some clear directions please.
Thank you,
Joel F. Leland
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Roger at rhill@hillconsult.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
All the way at the bottom of the list. It worked!
Thank you so much.
On Tue, Mar 17, 2020, 17:43 Roger Hill rhill@hillconsult.com wrote:
In the list of ports look for something like ttyUSB0...and use that one. Roger G3YTN
Get BlueMail for Android http://www.bluemail.me/r?b=15824 On 17 Mar 2020, at 16:39, Joel Leland jfleland@gmail.com wrote:
Hello,
I have 2 UV-5R's, Baofeng, which I am attempting to program with a linux, Zorinos, and a Retevis cable, which I bought with the radios. I have programmed these radios before using a windows laptop. Now I am unable to get the radio to communicate with CHIRP. It goes into clone mode and then I get a "Radio did not respond" error message. This is using /dev/ttyS4, which is the first one I got a response from. I am very much the n00b to linux and CHIRP and could use some clear directions please.
Thank you,
Joel F. Leland
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Roger at rhill@hillconsult.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Great!
Roger
Get BlueMail for Android
On 17 Mar 2020, 16:52, at 16:52, Joel Leland jfleland@gmail.com wrote:
All the way at the bottom of the list. It worked!
Thank you so much.
On Tue, Mar 17, 2020, 17:43 Roger Hill rhill@hillconsult.com wrote:
In the list of ports look for something like ttyUSB0...and use that
one.
Roger G3YTN
Get BlueMail for Android http://www.bluemail.me/r?b=15824 On 17 Mar 2020, at 16:39, Joel Leland jfleland@gmail.com wrote:
Hello,
I have 2 UV-5R's, Baofeng, which I am attempting to program with a
linux,
Zorinos, and a Retevis cable, which I bought with the radios. I have programmed these radios before using a windows laptop. Now I am
unable to
get the radio to communicate with CHIRP. It goes into clone mode and
then I
get a "Radio did not respond" error message. This is using
/dev/ttyS4,
which is the first one I got a response from. I am very much the n00b to linux and CHIRP and could use some clear directions please.
Thank you,
Joel F. Leland
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Roger at rhill@hillconsult.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Roger at rhill@hillconsult.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Try entering a different USB port... It’s weird.... I only have 3USB ports on my laplop but when I entered port 6 it worked.
On Tue, Mar 17, 2020 at 5:53 PM Roger Hill rhill@hillconsult.com wrote:
Great!
Roger
Get BlueMail for Android http://www.bluemail.me/r?b=15824 On 17 Mar 2020, at 16:52, Joel Leland jfleland@gmail.com wrote:
All the way at the bottom of the list. It worked!
Thank you so much.
On Tue, Mar 17, 2020, 17:43 Roger Hill < rhill@hillconsult.com> wrote:
In the list of ports look for something like ttyUSB0...and use that one. Roger G3YTN
Get BlueMail for Android http://www.bluemail.me/r?b=15824 On 17 Mar 2020, at 16:39, Joel Leland < jfleland@gmail.com> wrote:
Hello,
I have 2 UV-5R's, Baofeng, which I am attempting to program with a linux, Zorinos, and a Retevis cable, which I bought with the radios. I have programmed these radios before using a windows laptop. Now I am unable to get the radio to communicate with CHIRP. It goes into clone mode and then I get a "Radio did not respond" error message. This is using /dev/ttyS4, which is the first one I got a response from. I am very much the n00b to linux and CHIRP and could use some clear directions please.
Thank you,
Joel F. Leland
------------------------------chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Roger at rhill@hillconsult.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Roger at rhill@hillconsult.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to JOHN at jump12k@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
It worked as port 0 last night. Thanks for the reply.
On Wed, Mar 18, 2020, 09:42 John Dodd jump12k@gmail.com wrote:
Try entering a different USB port... It’s weird.... I only have 3USB ports on my laplop but when I entered port 6 it worked.
On Tue, Mar 17, 2020 at 5:53 PM Roger Hill rhill@hillconsult.com wrote:
Great!
Roger
Get BlueMail for Android http://www.bluemail.me/r?b=15824 On 17 Mar 2020, at 16:52, Joel Leland jfleland@gmail.com wrote:
All the way at the bottom of the list. It worked!
Thank you so much.
On Tue, Mar 17, 2020, 17:43 Roger Hill < rhill@hillconsult.com> wrote:
In the list of ports look for something like ttyUSB0...and use that one. Roger G3YTN
Get BlueMail for Android http://www.bluemail.me/r?b=15824 On 17 Mar 2020, at 16:39, Joel Leland < jfleland@gmail.com> wrote:
Hello,
I have 2 UV-5R's, Baofeng, which I am attempting to program with a linux, Zorinos, and a Retevis cable, which I bought with the radios. I have programmed these radios before using a windows laptop. Now I am unable to get the radio to communicate with CHIRP. It goes into clone mode and then I get a "Radio did not respond" error message. This is using /dev/ttyS4, which is the first one I got a response from. I am very much the n00b to linux and CHIRP and could use some clear directions please.
Thank you,
Joel F. Leland
------------------------------chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Roger at rhill@hillconsult.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Roger at rhill@hillconsult.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to JOHN at jump12k@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- John Dodd Chesapeake Bay _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Any time you change ports the device name can (but doesn't always) change. The easiest way I know of to know for sure is to open a terminal and right after plugging in the cable type "dmesg". The last USB device detected should be the one you just plugged in.
Thanks, Richard KF5OIM
Very good. Thank you
On Wed, Mar 18, 2020, 10:06 Richard Shaw hobbes1069@gmail.com wrote:
Any time you change ports the device name can (but doesn't always) change. The easiest way I know of to know for sure is to open a terminal and right after plugging in the cable type "dmesg". The last USB device detected should be the one you just plugged in.
Thanks, Richard KF5OIM _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (4)
-
Joel Leland -
John Dodd -
Richard Shaw -
Roger Hill