_______________________________________________On 17 Mar 2020, at 16:52, Joel Leland <jfleland@gmail.com> wrote:All the way at the bottom of the list. It worked!
Thank you so much.
On Tue, Mar 17, 2020, 17:43 Roger Hill < rhill@hillconsult.com> wrote:
_______________________________________________In the list of ports look for something like ttyUSB0...and use that one.
Roger
G3YTN
On 17 Mar 2020, at 16:39, Joel Leland < jfleland@gmail.com> wrote:Hello,
I have 2 UV-5R's, Baofeng, which I am attempting to program with a linux, Zorinos, and a Retevis cable, which I bought with the radios. I have programmed these radios before using a windows laptop. Now I am unable to get the radio to communicate with CHIRP. It goes into clone mode and then I get a "Radio did not respond" error message. This is using /dev/ttyS4, which is the first one I got a response from.I am very much the n00b to linux and CHIRP and could use some clear directions please.
Thank you,
--
Joel F. Leland
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Roger at rhill@hillconsult.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Joel at jfleland@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Roger at rhill@hillconsult.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to JOHN at jump12k@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com