[chirp_users] Can't connect to BTECH UV-25X2-Gen2
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
Is your radio turned up, way up?
Sent from my iPad
On Jul 15, 2023, at 2:56 PM, John Oliver jnojr1@gmail.com wrote:
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to WILL at aa1fd@mail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Tried again with volume all the way up. No change.
On Sat, Jul 15, 2023 at 4:23 PM Will Radcliffe aa1fd@mail.com wrote:
Is your radio turned up, way up?
Sent from my iPad
On Jul 15, 2023, at 2:56 PM, John Oliver jnojr1@gmail.com wrote:
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to WILL at aa1fd@mail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Make sure you're connecting to the right COM port. That has bitten me more than once.
On Sun, Jul 16, 2023 at 12:23 PM John Oliver jnojr1@gmail.com wrote:
Tried again with volume all the way up. No change.
On Sat, Jul 15, 2023 at 4:23 PM Will Radcliffe aa1fd@mail.com wrote:
Is your radio turned up, way up?
Sent from my iPad
On Jul 15, 2023, at 2:56 PM, John Oliver jnojr1@gmail.com wrote:
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to WILL at aa1fd@mail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Steve Hersey at n1xnxham@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
Are you sure you are plugged into the DATA port? The speaker/mic port in the back is right next to it making it easy to plug into the wrong one (don't ask me how I know).
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
Click 'Help' in the menu bar. In the dropdown list you should see 'Open debug log' and 'Show debug log location'.
Jim KC9HI
The two plugs are different sizes. The data cable only fits in one.
And my Help menu has no such options. All I see is About, Developer Mode, Reporting Enabled (which is checked), and "Load module from issue"
I turned on Developer Mode, but still don't see options for debug logs.
On Sat, Jul 15, 2023 at 4:54 PM Jim Unroe rock.unroe@gmail.com wrote:
I get "Error reading data from radio" I'm using this cable:
https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
Are you sure you are plugged into the DATA port? The speaker/mic port in the back is right next to it making it easy to plug into the wrong one (don't ask me how I know).
I cannot find a debug.log There is no option for one in my CHIRP
(CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
Click 'Help' in the menu bar. In the dropdown list you should see 'Open debug log' and 'Show debug log location'.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
The two plugs are different sizes. The data cable only fits in one.
They are not. The speaker/mic port is a 3.5MM TRRS socket with a black ring. The DATA port (closest to the fan) is a 3.5MM TRS socket with a silver ring. It is clearly marked "DATA" above it.
And my Help menu has no such options. All I see is About, Developer Mode, Reporting Enabled (which is checked), and "Load module from issue"
I turned on Developer Mode, but still don't see options for debug logs.
It doesn't sound like you have the latest CHIRP-next running.
Jim KC9HI
They are :-) The Y cable that came with the radio has RJ45 for the mic, and two different size jacks. It looks exactly like the two different size jacks on the cable for my other Baofeng, and that cable snaps in. I literally cannot plug the data jack into the smaller jack... it is too big.
And the CIRP I'm running is "CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4"
On Sun, Jul 16, 2023 at 9:44 AM Jim Unroe rock.unroe@gmail.com wrote:
The two plugs are different sizes. The data cable only fits in one.
They are not. The speaker/mic port is a 3.5MM TRRS socket with a black ring. The DATA port (closest to the fan) is a 3.5MM TRS socket with a silver ring. It is clearly marked "DATA" above it.
And my Help menu has no such options. All I see is About, Developer
Mode, Reporting Enabled (which is checked), and "Load module from issue"
I turned on Developer Mode, but still don't see options for debug logs.
It doesn't sound like you have the latest CHIRP-next running.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
On Sun, Jul 16, 2023 at 1:10 PM John Oliver jnojr1@gmail.com wrote:
They are :-) The Y cable that came with the radio has RJ45 for the mic, and two different size jacks. It looks exactly like the two different size jacks on the cable for my other Baofeng, and that cable snaps in. I literally cannot plug the data jack into the smaller jack... it is too big.
The Y cable that came with the radio is for being able to plug a typical Kenwood 2-pin style speaker/mic or an APRS cable into the radio to be used instead of the mic that comes with the radio. It is not for programming the radio.
Again. The DATA port is on the back of the radio next to the fan. It is labeled "DATA" above the port. Only this port can be used for programming.
And the CIRP I'm running is "CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4"
Then you should see the "debug" selections in the drop down "Help" menu.
Jim KC9HI
AAAAHHHHHHHH!!!!
Great Googly Moogly...
On Sun, Jul 16, 2023 at 10:31 AM Jim Unroe rock.unroe@gmail.com wrote:
On Sun, Jul 16, 2023 at 1:10 PM John Oliver jnojr1@gmail.com wrote:
They are :-) The Y cable that came with the radio has RJ45 for the mic,
and two different size jacks. It looks exactly like the two different size jacks on the cable for my other Baofeng, and that cable snaps in. I literally cannot plug the data jack into the smaller jack... it is too big.
The Y cable that came with the radio is for being able to plug a typical Kenwood 2-pin style speaker/mic or an APRS cable into the radio to be used instead of the mic that comes with the radio. It is not for programming the radio.
Again. The DATA port is on the back of the radio next to the fan. It is labeled "DATA" above the port. Only this port can be used for programming.
And the CIRP I'm running is "CHIRP next-20230712 on Python 3.8.10
wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4"
Then you should see the "debug" selections in the drop down "Help" menu.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Hi John, Might the tuned frequency be receiving traffic while you are connected? If so, make sure it's on a quiet channel. HTH. Glenn ----- Original Message ----- From: John Oliver To: chirp_users@intrepid.danplanet.com Sent: Saturday, July 15, 2023 4:54 PM Subject: [chirp_users] Can't connect to BTECH UV-25X2-Gen2
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
I hear nothing. No sign that anything is being received.
On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote:
Hi John, Might the tuned frequency be receiving traffic while you are connected?
If so, make sure it's on a quiet channel. HTH. Glenn ----- Original Message ----- *From:* John Oliver jnojr1@gmail.com *To:* chirp_users@intrepid.danplanet.com *Sent:* Saturday, July 15, 2023 4:54 PM *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Rich, How are COM Ports tested in Linux? I know in Windows, Device Manager can be used.
Thanks, David
On Sun, Jul 16, 2023 at 12:31 PM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote:
I hear nothing. No sign that anything is being received.
On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote:
Hi John, Might the tuned frequency be receiving traffic while you are connected?
If so, make sure it's on a quiet channel. HTH. Glenn ----- Original Message ----- *From:* John Oliver jnojr1@gmail.com *To:* chirp_users@intrepid.danplanet.com *Sent:* Saturday, July 15, 2023 4:54 PM *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Hi David and All, I read in a message recently, from Dan I believe, that Chirp now shows the port it's using. I think it is in download from radio, under help. That is what I remember, I haven't needed to look for it yet, but I do remember him posting that. Glenn ----- Original Message ----- From: D.J.J. Ring, Jr. To: Discussion of CHIRP Sent: Sunday, July 16, 2023 11:34 AM Subject: Re: [chirp_users] Can't connect to BTECH UV-25X2-Gen2
Rich, How are COM Ports tested in Linux? I know in Windows, Device Manager can be used.
Thanks, David
On Sun, Jul 16, 2023 at 12:31 PM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote: I hear nothing. No sign that anything is being received.
On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote:
Hi John, Might the tuned frequency be receiving traffic while you are connected? If so, make sure it's on a quiet channel. HTH. Glenn ----- Original Message ----- From: John Oliver To: chirp_users@intrepid.danplanet.com Sent: Saturday, July 15, 2023 4:54 PM Subject: [chirp_users] Can't connect to BTECH UV-25X2-Gen2
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
----------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
I tried under Windows 10, which reports the cable as being COM5. I could not connect to the radio. Now I've tried on another laptop running Ubuntu 22.04LTS. Still no dice. The "Help me" under port says "Your cable appears to be on port: FT231X USB UART - FT231X USB UART (/dev/ttyUSB0)"
Maybe the cable is bad?
On Sun, Jul 16, 2023 at 9:35 AM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Rich, How are COM Ports tested in Linux? I know in Windows, Device Manager can be used.
Thanks, David
On Sun, Jul 16, 2023 at 12:31 PM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote:
I hear nothing. No sign that anything is being received.
On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote:
Hi John, Might the tuned frequency be receiving traffic while you are connected?
If so, make sure it's on a quiet channel. HTH. Glenn ----- Original Message ----- *From:* John Oliver jnojr1@gmail.com *To:* chirp_users@intrepid.danplanet.com *Sent:* Saturday, July 15, 2023 4:54 PM *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
I'm using the Baofeng cable. https://www.amazon.com/dp/B017MT7IFG
On Sun, Jul 16, 2023 at 10:17 AM Rich Gilbertson na7rg@email.com wrote:
Years ago, I bought a 5 dollar cable to program my Baofeng. It didn't work. I was informed many cloned FTDI cables don't work. I bought the Baofeng cable, about $20 at the time. Always works.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 10:13 AM John Oliver jnojr1@gmail.com wrote:
I tried under Windows 10, which reports the cable as being COM5. I could not connect to the radio. Now I've tried on another laptop running Ubuntu 22.04LTS. Still no dice. The "Help me" under port says "Your cable appears to be on port: FT231X USB UART - FT231X USB UART (/dev/ttyUSB0)"
Maybe the cable is bad?
On Sun, Jul 16, 2023 at 9:35 AM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Rich, How are COM Ports tested in Linux? I know in Windows, Device Manager can be used.
Thanks, David
On Sun, Jul 16, 2023 at 12:31 PM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote:
I hear nothing. No sign that anything is being received.
On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote:
Hi John, Might the tuned frequency be receiving traffic while you are connected?
If so, make sure it's on a quiet channel. HTH. Glenn ----- Original Message ----- *From:* John Oliver jnojr1@gmail.com *To:* chirp_users@intrepid.danplanet.com *Sent:* Saturday, July 15, 2023 4:54 PM *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
If you had another radio the cable would connect to, you could try the cable there, to see if the problem is the cable or the radio. I have found that many of my cables work on different radios, if the tip fits into the radio. Glenn ----- Original Message ----- From: John Oliver To: Discussion of CHIRP Sent: Sunday, July 16, 2023 12:20 PM Subject: Re: [chirp_users] Can't connect to BTECH UV-25X2-Gen2
I'm using the Baofeng cable. https://www.amazon.com/dp/B017MT7IFG
On Sun, Jul 16, 2023 at 10:17 AM Rich Gilbertson na7rg@email.com wrote:
Years ago, I bought a 5 dollar cable to program my Baofeng. It didn't work. I was informed many cloned FTDI cables don't work. I bought the Baofeng cable, about $20 at the time. Always works.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 10:13 AM John Oliver jnojr1@gmail.com wrote: I tried under Windows 10, which reports the cable as being COM5. I could not connect to the radio. Now I've tried on another laptop running Ubuntu 22.04LTS. Still no dice. The "Help me" under port says "Your cable appears to be on port: FT231X USB UART - FT231X USB UART (/dev/ttyUSB0)"
Maybe the cable is bad?
On Sun, Jul 16, 2023 at 9:35 AM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Rich, How are COM Ports tested in Linux? I know in Windows, Device Manager can be used.
Thanks, David
On Sun, Jul 16, 2023 at 12:31 PM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote: I hear nothing. No sign that anything is being received.
On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote:
Hi John, Might the tuned frequency be receiving traffic while you are connected? If so, make sure it's on a quiet channel. HTH. Glenn ----- Original Message ----- From: John Oliver To: chirp_users@intrepid.danplanet.com Sent: Saturday, July 15, 2023 4:54 PM Subject: [chirp_users] Can't connect to BTECH UV-25X2-Gen2
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
----------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Boafeng can’t be reprogrammed once you program them it is set
On Sun, Jul 16, 2023 at 12:17 PM Rich Gilbertson na7rg@email.com wrote:
Years ago, I bought a 5 dollar cable to program my Baofeng. It didn't work. I was informed many cloned FTDI cables don't work. I bought the Baofeng cable, about $20 at the time. Always works.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 10:13 AM John Oliver jnojr1@gmail.com wrote:
I tried under Windows 10, which reports the cable as being COM5. I could not connect to the radio. Now I've tried on another laptop running Ubuntu 22.04LTS. Still no dice. The "Help me" under port says "Your cable appears to be on port: FT231X USB UART - FT231X USB UART (/dev/ttyUSB0)"
Maybe the cable is bad?
On Sun, Jul 16, 2023 at 9:35 AM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Rich, How are COM Ports tested in Linux? I know in Windows, Device Manager can be used.
Thanks, David
On Sun, Jul 16, 2023 at 12:31 PM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote:
I hear nothing. No sign that anything is being received.
On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote:
Hi John, Might the tuned frequency be receiving traffic while you are connected?
If so, make sure it's on a quiet channel. HTH. Glenn ----- Original Message ----- *From:* John Oliver jnojr1@gmail.com *To:* chirp_users@intrepid.danplanet.com *Sent:* Saturday, July 15, 2023 4:54 PM *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to James Howell at howelljames1153@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Funny, I can program my UV-5R all day long. If what you say was true, why would they sell a programming cable?
I'm guessing you're referring to the firmware, not the channels and settings. I am *NOT* trying to change firmware.
On Sun, Jul 16, 2023 at 10:26 AM James Howell howelljames1153@gmail.com wrote:
Boafeng can’t be reprogrammed once you program them it is set
On Sun, Jul 16, 2023 at 12:17 PM Rich Gilbertson na7rg@email.com wrote:
Years ago, I bought a 5 dollar cable to program my Baofeng. It didn't work. I was informed many cloned FTDI cables don't work. I bought the Baofeng cable, about $20 at the time. Always works.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 10:13 AM John Oliver jnojr1@gmail.com wrote:
I tried under Windows 10, which reports the cable as being COM5. I could not connect to the radio. Now I've tried on another laptop running Ubuntu 22.04LTS. Still no dice. The "Help me" under port says "Your cable appears to be on port: FT231X USB UART - FT231X USB UART (/dev/ttyUSB0)"
Maybe the cable is bad?
On Sun, Jul 16, 2023 at 9:35 AM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Rich, How are COM Ports tested in Linux? I know in Windows, Device Manager can be used.
Thanks, David
On Sun, Jul 16, 2023 at 12:31 PM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote:
I hear nothing. No sign that anything is being received.
On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote:
> Hi John, > Might the tuned frequency be receiving traffic while you are > connected? > > If so, make sure it's on a quiet channel. > HTH. > Glenn > ----- Original Message ----- > *From:* John Oliver jnojr1@gmail.com > *To:* chirp_users@intrepid.danplanet.com > *Sent:* Saturday, July 15, 2023 4:54 PM > *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2 > > I get "Error reading data from radio" I'm using this cable: > https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way! > > I cannot find a debug.log There is no option for one in my CHIRP > (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) > wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still > running: > > joliver@blinky:~$ ls .chirp/ > chirp.config stock_configs > > In the terminal I launched CHIRP: > > joliver@blinky:~$ ./.local/bin/chirp > 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string > ignored. > ERROR: Failed to clone: Error reading data from radio > Traceback (most recent call last): > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", > line 369, in _rawrecv > raise errors.RadioError("No data received from radio") > chirp.errors.RadioError: No data received from radio > > During handling of the above exception, another exception occurred: > > Traceback (most recent call last): > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", > line 68, in run > self._fn() > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", > line 758, in sync_in > data = _download(self) > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", > line 533, in _download > _do_ident(radio, status) > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", > line 447, in _do_ident > ident = _rawrecv(radio, 50) > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", > line 377, in _rawrecv > raise errors.RadioError("Error reading data from radio") > chirp.errors.RadioError: Error reading data from radio > > > ------------------------------ > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K0LNY at glenn@ervin.email > To unsubscribe, send an email to > chirp_users-unsubscribe@intrepid.danplanet.com > To report this email as off-topic, please email > chirp_users-owner@intrepid.danplanet.com > Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to John Oliver at jnojr1@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscribe@intrepid.danplanet.com > To report this email as off-topic, please email > chirp_users-owner@intrepid.danplanet.com > Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to James Howell at howelljames1153@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Funny, I can program my UV-5R all day long. If what you say was true, why would they sell a programming cable?
The PC03 programming cable is only for handheld radios that use the Kenwood style 2-pin connection for programming. The Baofeng Tech mobile radios use a different programming cable. The PC04. CHIRP will not be able to program your UV-25X2 radio until you connect it properly to the DATA port in the back.
https://baofengtech.com/product/pc-04-programming-cable/
Jim KC9HI
He doesn't have the correct cable.
On Sun, Jul 16, 2023 at 4:58 PM don.goodrich@cheerful.com wrote:
I reprogram my Baofeng HTs all the time not sure why you can’t….
Sent using the free mail.com iPhone Appki
On 7/16/23 at 12:26 PM, James Howell wrote:
From: "James Howell" howelljames1153@gmail.com Date: July 16, 2023 To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Cc: Subject: Re: [chirp_users] Can't connect to BTECH UV-25X2-Gen2 Boafeng can’t be reprogrammed once you program them it is set
On Sun, Jul 16, 2023 at 12:17 PM Rich Gilbertson na7rg@email.com wrote:
Years ago, I bought a 5 dollar cable to program my Baofeng. It didn't work. I was informed many cloned FTDI cables don't work. I bought the Baofeng cable, about $20 at the time. Always works.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 10:13 AM John Oliver jnojr1@gmail.com wrote:
I tried under Windows 10, which reports the cable as being COM5. I could not connect to the radio. Now I've tried on another laptop running Ubuntu 22.04LTS. Still no dice. The "Help me" under port says "Your cable appears to be on port: FT231X USB UART - FT231X USB UART (/dev/ttyUSB0)"
Maybe the cable is bad?
On Sun, Jul 16, 2023 at 9:35 AM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Rich, How are COM Ports tested in Linux? I know in Windows, Device Manager can be used.
Thanks, David
On Sun, Jul 16, 2023 at 12:31 PM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote:
I hear nothing. No sign that anything is being received.
On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote:
> Hi John, > Might the tuned frequency be receiving traffic while you are > connected? > > If so, make sure it's on a quiet channel. > HTH. > Glenn > ----- Original Message ----- > *From:* John Oliver jnojr1@gmail.com > *To:* chirp_users@intrepid.danplanet.com > *Sent:* Saturday, July 15, 2023 4:54 PM > *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2 > > I get "Error reading data from radio" I'm using this cable: > https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way! > > I cannot find a debug.log There is no option for one in my CHIRP > (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) > wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still > running: > > joliver@blinky:~$ ls .chirp/ > chirp.config stock_configs > > In the terminal I launched CHIRP: > > joliver@blinky:~$ ./.local/bin/chirp > 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string > ignored. > ERROR: Failed to clone: Error reading data from radio > Traceback (most recent call last): > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", > line 369, in _rawrecv > raise errors.RadioError("No data received from radio") > chirp.errors.RadioError: No data received from radio > > During handling of the above exception, another exception occurred: > > Traceback (most recent call last): > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", > line 68, in run > self._fn() > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", > line 758, in sync_in > data = _download(self) > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", > line 533, in _download > _do_ident(radio, status) > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", > line 447, in _do_ident > ident = _rawrecv(radio, 50) > File > "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", > line 377, in _rawrecv > raise errors.RadioError("Error reading data from radio") > chirp.errors.RadioError: Error reading data from radio > > > ------------------------------ > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K0LNY at glenn@ervin.email > To unsubscribe, send an email to > chirp_users-unsubscribe@intrepid.danplanet.com > To report this email as off-topic, please email > chirp_users-owner@intrepid.danplanet.com > Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to John Oliver at jnojr1@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscribe@intrepid.danplanet.com > To report this email as off-topic, please email > chirp_users-owner@intrepid.danplanet.com > Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to James Howell at howelljames1153@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich@cheerful.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
He's got the correct cable, https://www.amazon.com/dp/B017MT7IFG for BTECH PC04 FTDI USB Programming Cable for BTECH UV-25X2-Gen2 He's just plugging it into the wrong jack in the back. The back has two jacks one says 'DATA" that's the one he needs to use.
See this: [image: BTECH UV-25X2-Gen2.jpg] He also doesn't seem to be using a updated version of chirp-next.
73 DR
On Sun, Jul 16, 2023 at 5:32 PM John Wuest jhwuest@gmail.com wrote:
He doesn't have the correct cable.
On Sun, Jul 16, 2023 at 4:58 PM don.goodrich@cheerful.com wrote:
I reprogram my Baofeng HTs all the time not sure why you can’t….
Sent using the free mail.com iPhone Appki
On 7/16/23 at 12:26 PM, James Howell wrote:
From: "James Howell" howelljames1153@gmail.com Date: July 16, 2023 To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Cc: Subject: Re: [chirp_users] Can't connect to BTECH UV-25X2-Gen2 Boafeng can’t be reprogrammed once you program them it is set
On Sun, Jul 16, 2023 at 12:17 PM Rich Gilbertson na7rg@email.com wrote:
Years ago, I bought a 5 dollar cable to program my Baofeng. It didn't work. I was informed many cloned FTDI cables don't work. I bought the Baofeng cable, about $20 at the time. Always works.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 10:13 AM John Oliver jnojr1@gmail.com wrote:
I tried under Windows 10, which reports the cable as being COM5. I could not connect to the radio. Now I've tried on another laptop running Ubuntu 22.04LTS. Still no dice. The "Help me" under port says "Your cable appears to be on port: FT231X USB UART - FT231X USB UART (/dev/ttyUSB0)"
Maybe the cable is bad?
On Sun, Jul 16, 2023 at 9:35 AM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Rich, How are COM Ports tested in Linux? I know in Windows, Device Manager can be used.
Thanks, David
On Sun, Jul 16, 2023 at 12:31 PM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote:
> I hear nothing. No sign that anything is being received. > > On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote: > >> Hi John, >> Might the tuned frequency be receiving traffic while you are >> connected? >> >> If so, make sure it's on a quiet channel. >> HTH. >> Glenn >> ----- Original Message ----- >> *From:* John Oliver jnojr1@gmail.com >> *To:* chirp_users@intrepid.danplanet.com >> *Sent:* Saturday, July 15, 2023 4:54 PM >> *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2 >> >> I get "Error reading data from radio" I'm using this cable: >> https://www.amazon.com/dp/B017MT7IFG It is plugged in all the >> way! >> >> I cannot find a debug.log There is no option for one in my CHIRP >> (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) >> wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still >> running: >> >> joliver@blinky:~$ ls .chirp/ >> chirp.config stock_configs >> >> In the terminal I launched CHIRP: >> >> joliver@blinky:~$ ./.local/bin/chirp >> 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel >> string ignored. >> ERROR: Failed to clone: Error reading data from radio >> Traceback (most recent call last): >> File >> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", >> line 369, in _rawrecv >> raise errors.RadioError("No data received from radio") >> chirp.errors.RadioError: No data received from radio >> >> During handling of the above exception, another exception occurred: >> >> Traceback (most recent call last): >> File >> "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", >> line 68, in run >> self._fn() >> File >> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", >> line 758, in sync_in >> data = _download(self) >> File >> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", >> line 533, in _download >> _do_ident(radio, status) >> File >> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", >> line 447, in _do_ident >> ident = _rawrecv(radio, 50) >> File >> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", >> line 377, in _rawrecv >> raise errors.RadioError("Error reading data from radio") >> chirp.errors.RadioError: Error reading data from radio >> >> >> ------------------------------ >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to K0LNY at glenn@ervin.email >> To unsubscribe, send an email to >> chirp_users-unsubscribe@intrepid.danplanet.com >> To report this email as off-topic, please email >> chirp_users-owner@intrepid.danplanet.com >> Searchable archive: >> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to John Oliver at jnojr1@gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscribe@intrepid.danplanet.com >> To report this email as off-topic, please email >> chirp_users-owner@intrepid.danplanet.com >> Searchable archive: >> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com > > _______________________________________________ chirp_users mailing > list chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users This > message was sent to Rich at na7rg@email.com To unsubscribe, send an > email to chirp_users-unsubscribe@intrepid.danplanet.com To report > this email as off-topic, please email > chirp_users-owner@intrepid.danplanet.com Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to James Howell at howelljames1153@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich@cheerful.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
This. I was plugging into the Y cable because it looked just like my UV-5[RG]s. I just need to lick the power cable while plugging it in...
On Sun, Jul 16, 2023 at 4:46 PM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
He's got the correct cable, https://www.amazon.com/dp/B017MT7IFG for BTECH PC04 FTDI USB Programming Cable for BTECH UV-25X2-Gen2 He's just plugging it into the wrong jack in the back. The back has two jacks one says 'DATA" that's the one he needs to use.
See this: [image: BTECH UV-25X2-Gen2.jpg] He also doesn't seem to be using a updated version of chirp-next.
73 DR
On Sun, Jul 16, 2023 at 5:32 PM John Wuest jhwuest@gmail.com wrote:
He doesn't have the correct cable.
On Sun, Jul 16, 2023 at 4:58 PM don.goodrich@cheerful.com wrote:
I reprogram my Baofeng HTs all the time not sure why you can’t….
Sent using the free mail.com iPhone Appki
On 7/16/23 at 12:26 PM, James Howell wrote:
From: "James Howell" howelljames1153@gmail.com Date: July 16, 2023 To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Cc: Subject: Re: [chirp_users] Can't connect to BTECH UV-25X2-Gen2 Boafeng can’t be reprogrammed once you program them it is set
On Sun, Jul 16, 2023 at 12:17 PM Rich Gilbertson na7rg@email.com wrote:
Years ago, I bought a 5 dollar cable to program my Baofeng. It didn't work. I was informed many cloned FTDI cables don't work. I bought the Baofeng cable, about $20 at the time. Always works.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 10:13 AM John Oliver jnojr1@gmail.com wrote:
I tried under Windows 10, which reports the cable as being COM5. I could not connect to the radio. Now I've tried on another laptop running Ubuntu 22.04LTS. Still no dice. The "Help me" under port says "Your cable appears to be on port: FT231X USB UART - FT231X USB UART (/dev/ttyUSB0)"
Maybe the cable is bad?
On Sun, Jul 16, 2023 at 9:35 AM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Rich, How are COM Ports tested in Linux? I know in Windows, Device Manager can be used.
Thanks, David
On Sun, Jul 16, 2023 at 12:31 PM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
> > -- > Sent from my Android phone with mail.com Mail. Please excuse my > brevity. > On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote: > >> I hear nothing. No sign that anything is being received. >> >> On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote: >> >>> Hi John, >>> Might the tuned frequency be receiving traffic while you are >>> connected? >>> >>> If so, make sure it's on a quiet channel. >>> HTH. >>> Glenn >>> ----- Original Message ----- >>> *From:* John Oliver jnojr1@gmail.com >>> *To:* chirp_users@intrepid.danplanet.com >>> *Sent:* Saturday, July 15, 2023 4:54 PM >>> *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2 >>> >>> I get "Error reading data from radio" I'm using this cable: >>> https://www.amazon.com/dp/B017MT7IFG It is plugged in all the >>> way! >>> >>> I cannot find a debug.log There is no option for one in my CHIRP >>> (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) >>> wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still >>> running: >>> >>> joliver@blinky:~$ ls .chirp/ >>> chirp.config stock_configs >>> >>> In the terminal I launched CHIRP: >>> >>> joliver@blinky:~$ ./.local/bin/chirp >>> 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel >>> string ignored. >>> ERROR: Failed to clone: Error reading data from radio >>> Traceback (most recent call last): >>> File >>> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", >>> line 369, in _rawrecv >>> raise errors.RadioError("No data received from radio") >>> chirp.errors.RadioError: No data received from radio >>> >>> During handling of the above exception, another exception >>> occurred: >>> >>> Traceback (most recent call last): >>> File >>> "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", >>> line 68, in run >>> self._fn() >>> File >>> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", >>> line 758, in sync_in >>> data = _download(self) >>> File >>> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", >>> line 533, in _download >>> _do_ident(radio, status) >>> File >>> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", >>> line 447, in _do_ident >>> ident = _rawrecv(radio, 50) >>> File >>> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", >>> line 377, in _rawrecv >>> raise errors.RadioError("Error reading data from radio") >>> chirp.errors.RadioError: Error reading data from radio >>> >>> >>> ------------------------------ >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users@intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to K0LNY at glenn@ervin.email >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe@intrepid.danplanet.com >>> To report this email as off-topic, please email >>> chirp_users-owner@intrepid.danplanet.com >>> Searchable archive: >>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users@intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to John Oliver at jnojr1@gmail.com >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe@intrepid.danplanet.com >>> To report this email as off-topic, please email >>> chirp_users-owner@intrepid.danplanet.com >>> Searchable archive: >>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >> >> _______________________________________________ chirp_users mailing >> list chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This >> message was sent to Rich at na7rg@email.com To unsubscribe, send >> an email to chirp_users-unsubscribe@intrepid.danplanet.com To >> report this email as off-topic, please email >> chirp_users-owner@intrepid.danplanet.com Searchable archive: >> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net > To unsubscribe, send an email to > chirp_users-unsubscribe@intrepid.danplanet.com > To report this email as off-topic, please email > chirp_users-owner@intrepid.danplanet.com > Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to James Howell at howelljames1153@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich@cheerful.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
So have you plugged the BTECH PC04 FTDI USB Programming Cable
into the data jack on the back of the BTECH UV-25X2-Gen2 transceiver where it says "DATA"? - it's marked with #2 in this illustration. [image: BTECH UV-25X2-Gen2.jpg] and did it work?
73 David N1EA
John,
No harm if you did something dumb, you were just copying from me, I've done that a dozen or more times, but I kept going.
Did you manage to solve your problem?
If not more help is gladly available although not guaranteed to be 100% accurate but between us all, we haven't missed a fix.
Yes? No?
73 David N1EA
On Sun, Jul 16, 2023, 9:19 PM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
So have you plugged the BTECH PC04 FTDI USB Programming Cable
into the data jack on the back of the BTECH UV-25X2-Gen2 transceiver where it says "DATA"? - it's marked with #2 in this illustration. [image: BTECH UV-25X2-Gen2.jpg] and did it work?
73 David N1EA
It's a USB cable, and shows up as /dev/ttyUSB0 There's even a green light on the cable that turns on!
This is an FTDI cable. I'm running Ubuntu 20.04LTS
/var/log/kern.log.1:Jul 15 14:37:25 blinky kernel: [784841.691583] usbcore: registered new interface driver ftdi_sio /var/log/kern.log.1:Jul 15 14:37:25 blinky kernel: [784841.691733] ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected /var/log/kern.log.1:Jul 15 14:57:41 blinky kernel: [ 4.155316] usbcore: registered new interface driver ftdi_sio /var/log/kern.log.1:Jul 15 14:57:41 blinky kernel: [ 4.155391] ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected
On Sun, Jul 16, 2023 at 9:30 AM Rich Gilbertson na7rg@email.com wrote:
Check comm ports. Usually 3 or 4. Should show the chip in your cable.
-- Sent from my Android phone with mail.com Mail. Please excuse my brevity. On 7/16/23, 9:27 AM John Oliver jnojr1@gmail.com wrote:
I hear nothing. No sign that anything is being received.
On Sat, Jul 15, 2023 at 9:22 PM K0LNY glenn@ervin.email wrote:
Hi John, Might the tuned frequency be receiving traffic while you are connected?
If so, make sure it's on a quiet channel. HTH. Glenn ----- Original Message ----- *From:* John Oliver jnojr1@gmail.com *To:* chirp_users@intrepid.danplanet.com *Sent:* Saturday, July 15, 2023 4:54 PM *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2
I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way!
I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running:
joliver@blinky:~$ ls .chirp/ chirp.config stock_configs
In the terminal I launched CHIRP:
joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg@email.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Oliver at jnojr1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
participants (10)
-
D.J.J. Ring, Jr. -
don.goodrich＠cheerful.com -
James Howell -
Jim Unroe -
John Oliver -
John Wuest -
K0LNY -
Rich Gilbertson -
Stephen Hersey -
Will Radcliffe