Glenn, You may have to short press the top right knob to set the right side as main band first before the squelch knob becomes active.

Be blessed! May 2019 be our year of change & growth!

Gary Craig Maintenance Webco Industries Texas Distribution 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext. 107 Fax 918-246-7045

gcraig@webcotube.commailto:gcraig@webcotube.com

From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Glenn At Home Sent: Saturday, January 19, 2019 6:51 PM To: Jardy jardy72@yahoo.com; Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Tyt 9800 Update

This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious

One reason I found already is I can squelch one side and not the other. Glenn ----- Original Message ----- From: Jardy via chirp_usersmailto:chirp_users@intrepid.danplanet.com To: Discussion of CHIRPmailto:chirp_users@intrepid.danplanet.com Sent: Saturday, January 19, 2019 6:46 PM Subject: Re: [chirp_users] Tyt 9800 Update

Why would you want to have vhf on one side and uhf on the other, instead of both sides the same? What if you want to listen to two vhf or two uhf frequencies? The only reason I can think of is if you would run out of channel storage space for all the frequencies you want to listen to otherwise. Just my $0.03 (inflation) worth. Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.

On Jan 19, 2019, at 16:27, Glenn At Home <GlennErvin@cableone.netmailto:GlennErvin@cableone.net> wrote: Thanks All, I think I got it working. I tweaked the CSV file, at one point, Open Office took out all the values in the offset column, so I opened another file in Excel that was about the same, and I selected the column and copied it and switched over to the file in Open Office and pasted it in. Setting it to the defaults helped, because this time when I imported the file, I think, the VHF is on the left and the UHF is on the right. Not much UHF going on around here to be sure. I need to learn the buttons on the mic other than the number pad and I know the top switch locks some of the keys, including the two top ones. It's good to turn those off, as I find myself pressing keys on that thing just by holding it while punching a button. Anyway, thanks all for helping me get this far. Glenn

Sent From My Tabletop _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.commailto:jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com ________________________________ _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.netmailto:glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com