2 - 2900's - one modded and one not - cable works fine on the un-modded one. As a matter of fact - I have several types of cables for different radios, so yes, I think that's the driver I'm using.

On 2/23/2017 7:55 PM, Jardy Dawson via chirp_users wrote:

Check device manager to see if your cable is a Prolific. If it is, roll your driver back to 3.2.0.0 and see if that works.

Jardy Dawson WA7JRD Ham Radio

Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that!

On Feb 23, 2017, at 16:49, Tom Barton <tbarton@hvc.rr.com mailto:tbarton@hvc.rr.com> wrote:

I've been reading bug reports and have not been able to determine if the "Failed to communicate with radio: Failed to read header." on a TX Modded radio has been fixed or not. Running Windows 7 and the latest chirp build.

Any help or suggestions appreciated.

Tom B. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com mailto:jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom at tbarton@hvc.rr.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com