[chirp_users] Tone squelch QYT KT-7900D
Hi all!
New member of the list, new user of Chirp and new user of the QYT KT-7900D.
Before i received my KT-7900D i read "somewhere" on the internet that a user of this radio had the issue that he can only hear what is happening on the air when he uses the Monitor. Scanning stops whenever there is a signal, but the squelch doesn't open. I thought it had something to do with the radio expecting a receive tone as well to get open the squelch, but i'm not sure what exactly he did to fix this. Was that on this list? I have the same issue.
Ton.
Change from TSQL to Tone should solve the problem.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Oct 24, 2018, at 08:30, Ton Machielsen ton@machielsen.net wrote:
Hi all!
New member of the list, new user of Chirp and new user of the QYT KT-7900D.
Before i received my KT-7900D i read "somewhere" on the internet that a user of this radio had the issue that he can only hear what is happening on the air when he uses the Monitor. Scanning stops whenever there is a signal, but the squelch doesn't open. I thought it had something to do with the radio expecting a receive tone as well to get open the squelch, but i'm not sure what exactly he did to fix this. Was that on this list? I have the same issue.
Ton. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
This is the problem i am having: https://www.youtube.com/watch?v=VVo4N4UPy2M Apparently no solution yet.... Weird.
On Wed, Oct 24, 2018 at 8:48 AM Jardy via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Change from TSQL to Tone should solve the problem.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Oct 24, 2018, at 08:30, Ton Machielsen ton@machielsen.net wrote:
Hi all!
New member of the list, new user of Chirp and new user of the QYT KT-7900D.
Before i received my KT-7900D i read "somewhere" on the internet that a user of this radio had the issue that he can only hear what is happening on the air when he uses the Monitor. Scanning stops whenever there is a signal, but the squelch doesn't open. I thought it had something to do with the radio expecting a receive tone as well to get open the squelch, but i'm not sure what exactly he did to fix this. Was that on this list? I have the same issue.
Ton.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ton at ton@machielsen.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Seems to me you have TSQL set. That means the radio is expecting the repeater to transmit a tone. Either it isn’t sending a tone, or the radio is expecting a different tone than what it’s getting. Try setting the frequency to TONE. The radio will transmit the tone to activate the repeater, but will hear all responses back. I mentioned this before, but did not catch if you tried the change or not.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Oct 25, 2018, at 18:24, Ton Machielsen ton@machielsen.net wrote:
This is the problem i am having: https://www.youtube.com/watch?v=VVo4N4UPy2M Apparently no solution yet.... Weird.
On Wed, Oct 24, 2018 at 8:48 AM Jardy via chirp_users chirp_users@intrepid.danplanet.com wrote: Change from TSQL to Tone should solve the problem.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Oct 24, 2018, at 08:30, Ton Machielsen ton@machielsen.net wrote:
Hi all!
New member of the list, new user of Chirp and new user of the QYT KT-7900D.
Before i received my KT-7900D i read "somewhere" on the internet that a user of this radio had the issue that he can only hear what is happening on the air when he uses the Monitor. Scanning stops whenever there is a signal, but the squelch doesn't open. I thought it had something to do with the radio expecting a receive tone as well to get open the squelch, but i'm not sure what exactly he did to fix this. Was that on this list? I have the same issue.
Ton. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ton at ton@machielsen.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nope. All is set to Tone, not to TSQL.
On Fri, Oct 26, 2018 at 3:49 AM Jardy via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Seems to me you have TSQL set. That means the radio is expecting the repeater to transmit a tone. Either it isn’t sending a tone, or the radio is expecting a different tone than what it’s getting. Try setting the frequency to TONE. The radio will transmit the tone to activate the repeater, but will hear all responses back. I mentioned this before, but did not catch if you tried the change or not.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Oct 25, 2018, at 18:24, Ton Machielsen ton@machielsen.net wrote:
This is the problem i am having: https://www.youtube.com/watch?v=VVo4N4UPy2M Apparently no solution yet.... Weird.
On Wed, Oct 24, 2018 at 8:48 AM Jardy via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Change from TSQL to Tone should solve the problem.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Oct 24, 2018, at 08:30, Ton Machielsen ton@machielsen.net wrote:
Hi all!
New member of the list, new user of Chirp and new user of the QYT KT-7900D.
Before i received my KT-7900D i read "somewhere" on the internet that a user of this radio had the issue that he can only hear what is happening on the air when he uses the Monitor. Scanning stops whenever there is a signal, but the squelch doesn't open. I thought it had something to do with the radio expecting a receive tone as well to get open the squelch, but i'm not sure what exactly he did to fix this. Was that on this list? I have the same issue.
Ton.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ton at ton@machielsen.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ton at ton@machielsen.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Give me an example of a repeater you are trying to access?
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Sat, Oct 27, 2018 at 1:14 PM Ton Machielsen ton@machielsen.net wrote:
Nope. All is set to Tone, not to TSQL.
On Fri, Oct 26, 2018 at 3:49 AM Jardy via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Seems to me you have TSQL set. That means the radio is expecting the repeater to transmit a tone. Either it isn’t sending a tone, or the radio is expecting a different tone than what it’s getting. Try setting the frequency to TONE. The radio will transmit the tone to activate the repeater, but will hear all responses back. I mentioned this before, but did not catch if you tried the change or not.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Oct 25, 2018, at 18:24, Ton Machielsen ton@machielsen.net wrote:
This is the problem i am having: https://www.youtube.com/watch?v=VVo4N4UPy2M Apparently no solution yet.... Weird.
On Wed, Oct 24, 2018 at 8:48 AM Jardy via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Change from TSQL to Tone should solve the problem.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Oct 24, 2018, at 08:30, Ton Machielsen ton@machielsen.net wrote:
Hi all!
New member of the list, new user of Chirp and new user of the QYT KT-7900D.
Before i received my KT-7900D i read "somewhere" on the internet that a user of this radio had the issue that he can only hear what is happening on the air when he uses the Monitor. Scanning stops whenever there is a signal, but the squelch doesn't open. I thought it had something to do with the radio expecting a receive tone as well to get open the squelch, but i'm not sure what exactly he did to fix this. Was that on this list? I have the same issue.
Ton.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ton at ton@machielsen.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ton at ton@machielsen.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Ton,
On Sat, Oct 27, 2018 at 2:15 PM Ton Machielsen ton@machielsen.net wrote:
Nope. All is set to Tone, not to TSQL.
Have you checked the per-channel "Optional signaling" setting (see below) to make sure it is set to "OFF"?
To view/edit the "extra" per-channel settings right click a memory row, choose "Properties" and then select the "Other" tab.
Jim KC9HI
That was the one!!! Thank you VERY much!!
On Sat, Oct 27, 2018 at 11:43 PM Jim Unroe rock.unroe@gmail.com wrote:
Ton,
On Sat, Oct 27, 2018 at 2:15 PM Ton Machielsen ton@machielsen.net wrote:
Nope. All is set to Tone, not to TSQL.
Have you checked the per-channel "Optional signaling" setting (see below) to make sure it is set to "OFF"?
To view/edit the "extra" per-channel settings right click a memory row, choose "Properties" and then select the "Other" tab.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ton at ton@machielsen.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
As others have suggested, you appear to have settings wrong associated with squelch.
In Chirp, TONE set to Tone only if the repeater needs it.
Also, something in your menu system sets squelch sensitivity and might need reducing.
On 25 October 2018 at 21:24 Ton Machielsen ton@machielsen.net wrote:
This is the problem i am having: https://www.youtube.com/watch?v=VVo4N4UPy2M Apparently no solution yet.... Weird. On Wed, Oct 24, 2018 at 8:48 AM Jardy via chirp_users < chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > wrote: > > Change from TSQL to Tone should solve the problem.Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator. On Oct 24, 2018, at 08:30, Ton Machielsen < ton@machielsen.net mailto:ton@machielsen.net > wrote: > > > Hi all!New member of the list, new user of Chirp and new user of the QYT KT-7900D. Before i received my KT-7900D i read "somewhere" on the internet that a user of this radio had the issue that he can only hear what is happening on the air when he uses the Monitor. Scanning stops whenever there is a signal, but the squelch doesn't open. I thought it had something to do with the radio expecting a receive tone as well to get open the squelch, but i'm not sure what exactly he did to fix this. Was that on this list? I have the same issue. Ton. > >> > > _______________________________________________chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com mailto:jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > > _______________________________________________chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ton at ton@machielsen.net mailto:ton@machielsen.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > _______________________________________________chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
participants (5)
-
Dennis Wage -
Jardy -
Jim Unroe -
Nigel A. Gunn G8IFF/W8IFF -
Ton Machielsen