On Wed, Oct 24, 2018 at 8:48 AM Jardy via chirp_users < chirp_users@intrepid.danplanet.com> wrote:

Change from TSQL to Tone should solve the problem.

Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator.

On Oct 24, 2018, at 08:30, Ton Machielsen < ton@machielsen.net> wrote:

Hi all!

New member of the list, new user of Chirp and new user of the QYT KT-7900D.

Before i received my KT-7900D i read "somewhere" on the internet that a user of this radio had the issue that he can only hear what is happening on the air when he uses the Monitor. Scanning stops whenever there is a signal, but the squelch doesn't open. I thought it had something to do with the radio expecting a receive tone as well to get open the squelch, but i'm not sure what exactly he did to fix this.
Was that on this list? I have the same issue.

Ton.
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ton at ton@machielsen.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com