[chirp_users] Software version discrepancy
I just received my second uv-82 L today and in the process of trying to copy the image of the first radio into the new radio resulted in a error message stating that the software version of the image did not match the software version of the radio and would not load the image. Is there a way to bypass this is I am NOT looking forward to handloading 56 channels worth of information into the new radio by hand.
On Wed, Nov 18, 2015 at 7:42 PM, Gary Runningbear runningbear2000@gmail.com wrote:
I just received my second uv-82 L today and in the process of trying to copy the image of the first radio into the new radio resulted in a error message stating that the software version of the image did not match the software version of the radio and would not load the image. Is there a way to bypass this is I am NOT looking forward to handloading 56 channels worth of information into the new radio by hand.
You download from radio #2 into CHIRP (or load a previously saved image from it) Click File -> Import and then change the file mask from [CHIRP Files (*.chirp)[ to [CHIRP Radio Images (*.img)] Locate and loat the saved image from radio #1. Make any needed changes in the Import From File menu and then click the [OK] button.
If that is too much, then just download from both radios to create 2 tabs. Then copy-and-past the channels from the tab from radio #1 to the tab from radio #2.
Jim KC9HI
Thanks Jim, I'll try that here in just a little bit. On Nov 18, 2015 7:58 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Wed, Nov 18, 2015 at 7:42 PM, Gary Runningbear runningbear2000@gmail.com wrote:
I just received my second uv-82 L today and in the process of trying to
copy
the image of the first radio into the new radio resulted in a error
message
stating that the software version of the image did not match the software version of the radio and would not load the image. Is there a way to
bypass
this is I am NOT looking forward to handloading 56 channels worth of information into the new radio by hand.
You download from radio #2 into CHIRP (or load a previously saved image from it) Click File -> Import and then change the file mask from [CHIRP Files (*.chirp)[ to [CHIRP Radio Images (*.img)] Locate and loat the saved image from radio #1. Make any needed changes in the Import From File menu and then click the [OK] button.
If that is too much, then just download from both radios to create 2 tabs. Then copy-and-past the channels from the tab from radio #1 to the tab from radio #2.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Can I copy the channels in Mass and how would I do that? On Nov 18, 2015 8:00 PM, "Gary Runningbear" runningbear2000@gmail.com wrote:
Thanks Jim, I'll try that here in just a little bit. On Nov 18, 2015 7:58 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Wed, Nov 18, 2015 at 7:42 PM, Gary Runningbear runningbear2000@gmail.com wrote:
I just received my second uv-82 L today and in the process of trying to
copy
the image of the first radio into the new radio resulted in a error
message
stating that the software version of the image did not match the
software
version of the radio and would not load the image. Is there a way to
bypass
this is I am NOT looking forward to handloading 56 channels worth of information into the new radio by hand.
You download from radio #2 into CHIRP (or load a previously saved image from it) Click File -> Import and then change the file mask from [CHIRP Files (*.chirp)[ to [CHIRP Radio Images (*.img)] Locate and loat the saved image from radio #1. Make any needed changes in the Import From File menu and then click the [OK] button.
If that is too much, then just download from both radios to create 2 tabs. Then copy-and-past the channels from the tab from radio #1 to the tab from radio #2.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Just hold SHIFT when you select the cells to select the whole range, then right-click to bring up the menu and COPY.
On Wed, Nov 18, 2015 at 7:02 PM, Gary Runningbear <runningbear2000@gmail.com
wrote:
Can I copy the channels in Mass and how would I do that? On Nov 18, 2015 8:00 PM, "Gary Runningbear" runningbear2000@gmail.com wrote:
Thanks Jim, I'll try that here in just a little bit. On Nov 18, 2015 7:58 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Wed, Nov 18, 2015 at 7:42 PM, Gary Runningbear runningbear2000@gmail.com wrote:
I just received my second uv-82 L today and in the process of trying
to copy
the image of the first radio into the new radio resulted in a error
message
stating that the software version of the image did not match the
software
version of the radio and would not load the image. Is there a way to
bypass
this is I am NOT looking forward to handloading 56 channels worth of information into the new radio by hand.
You download from radio #2 into CHIRP (or load a previously saved image from it) Click File -> Import and then change the file mask from [CHIRP Files (*.chirp)[ to [CHIRP Radio Images (*.img)] Locate and loat the saved image from radio #1. Make any needed changes in the Import From File menu and then click the [OK] button.
If that is too much, then just download from both radios to create 2 tabs. Then copy-and-past the channels from the tab from radio #1 to the tab from radio #2.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Thanks for your response, Eric. by tinkering around I finally figured out how to do it myself so I have everything straightened out and my program is loaded on the new phone. everything is good to go now. Thanks again.
Gary N8GPZ On Nov 18, 2015 10:43 PM, "Eric Vought" evought@pobox.com wrote:
Just hold SHIFT when you select the cells to select the whole range, then right-click to bring up the menu and COPY.
On Wed, Nov 18, 2015 at 7:02 PM, Gary Runningbear < runningbear2000@gmail.com> wrote:
Can I copy the channels in Mass and how would I do that? On Nov 18, 2015 8:00 PM, "Gary Runningbear" runningbear2000@gmail.com wrote:
Thanks Jim, I'll try that here in just a little bit. On Nov 18, 2015 7:58 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Wed, Nov 18, 2015 at 7:42 PM, Gary Runningbear runningbear2000@gmail.com wrote:
I just received my second uv-82 L today and in the process of trying
to copy
the image of the first radio into the new radio resulted in a error
message
stating that the software version of the image did not match the
software
version of the radio and would not load the image. Is there a way to
bypass
this is I am NOT looking forward to handloading 56 channels worth of information into the new radio by hand.
You download from radio #2 into CHIRP (or load a previously saved image from it) Click File -> Import and then change the file mask from [CHIRP Files (*.chirp)[ to [CHIRP Radio Images (*.img)] Locate and loat the saved image from radio #1. Make any needed changes in the Import From File menu and then click the [OK] button.
If that is too much, then just download from both radios to create 2 tabs. Then copy-and-past the channels from the tab from radio #1 to the tab from radio #2.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
In Italian, we call that Cut and Pasta.
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Eric Vought Sent: Wednesday, November 18, 2015 10:43 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Software version discrepancy
Just hold SHIFT when you select the cells to select the whole range, then right-click to bring up the menu and COPY.
On Wed, Nov 18, 2015 at 7:02 PM, Gary Runningbear runningbear2000@gmail.com wrote:
Can I copy the channels in Mass and how would I do that?
On Nov 18, 2015 8:00 PM, "Gary Runningbear" runningbear2000@gmail.com wrote:
Thanks Jim, I'll try that here in just a little bit.
On Nov 18, 2015 7:58 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Wed, Nov 18, 2015 at 7:42 PM, Gary Runningbear runningbear2000@gmail.com wrote:
I just received my second uv-82 L today and in the process of trying to copy the image of the first radio into the new radio resulted in a error message stating that the software version of the image did not match the software version of the radio and would not load the image. Is there a way to bypass this is I am NOT looking forward to handloading 56 channels worth of information into the new radio by hand.
You download from radio #2 into CHIRP (or load a previously saved image from it) Click File -> Import and then change the file mask from [CHIRP Files (*.chirp)[ to [CHIRP Radio Images (*.img)] Locate and loat the saved image from radio #1. Make any needed changes in the Import From File menu and then click the [OK] button.
If that is too much, then just download from both radios to create 2 tabs. Then copy-and-past the channels from the tab from radio #1 to the tab from radio #2.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (4)
-
Eric Vought -
Gary Runningbear -
Jim Unroe -
John LaMartina