[chirp_users] "RF power set" in Yaesu FT-857
I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" value correspond to the output power in watts?
Best regards 73
No. It corresponds to your radios low/med/high setting usually.
On 19 August 2019 at 18:00 Ernesto Xload xload.es@gmail.com wrote:
I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" value correspond to the output power in watts? Best regards 73 _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
Incorrect, it’s a yaesu, not a baofeng clone.
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Nigel A. Gunn G8IFF/W8IFF Sent: 20 August 2019 01:20 To: Discussion of CHIRP chirp_users@intrepid.danplanet.com; Ernesto Xload xload.es@gmail.com Subject: Re: [chirp_users] "RF power set" in Yaesu FT-857
No. It corresponds to your radios low/med/high setting usually. On 19 August 2019 at 18:00 Ernesto Xload <xload.es@gmail.commailto:xload.es@gmail.com> wrote: I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" value correspond to the output power in watts?
Best regards 73 _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.netmailto:nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.netmailto:nigel@ngunn.net www http://www.ngunn.net
Yes it does, you bung in 10, its set to 10w. 15, 15w etc. 4 lines there, hf 6,v and u.
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Ernesto Xload Sent: 19 August 2019 23:00 To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: [chirp_users] "RF power set" in Yaesu FT-857
I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" value correspond to the output power in watts?
Best regards 73
A lot of thanks Neil.
I can select 5-100 in Hf and 6m, 5-50 in VHF and 2-20 in UHF.
Best regards.
El mar., 20 ago. 2019 a las 7:50, Neil B (ne.b@hotmail.co.uk) escribió:
Yes it does, you bung in 10, its set to 10w. 15, 15w etc. 4 lines there, hf 6,v and u.
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> *On Behalf Of *Ernesto Xload *Sent:* 19 August 2019 23:00 *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Subject:* [chirp_users] "RF power set" in Yaesu FT-857
I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" value correspond to the output power in watts?
Best regards
73 _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ernesto Xload at xload.es@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (3)
-
Ernesto Xload -
Neil B -
Nigel A. Gunn G8IFF/W8IFF