Incorrect, it’s a yaesu, not a baofeng clone.

 

From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> On Behalf Of Nigel A. Gunn G8IFF/W8IFF
Sent: 20 August 2019 01:20
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>; Ernesto Xload <xload.es@gmail.com>
Subject: Re: [chirp_users] "RF power set" in Yaesu FT-857

 

No. It corresponds to your radios low/med/high setting usually.

On 19 August 2019 at 18:00 Ernesto Xload <xload.es@gmail.com> wrote:

I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" value correspond to the output power in watts?

 

Best regards

73

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

 

Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net