[chirp_users] Baofeng GT-5TP
Hi all, I have done a search regarding support for the Baofeng GT-5TP as I didn’t find it in the list when connecting to it.
I recently got a couple as I have had UV-5R’s and wanted new less beaten up handhelds.
CHIRP doesn’t like them when selecting other model numbers, the results range from just timing out/reporting wrong model/ reporting too much data.
The CHIRP Site says to use “UV-82HP” It errors out with “Incorrect ‘Model’ selected” (on version “daily-20171104”)
I have been able to use the extremely hokey application from Baofeng called “UV82 Series Program Software.( US2S35 VIP Version)”
The details of firmware I can find when turning on are: (“3” when turning on) Ver N82301 (“5” when turning on) 160408N
Any suggestions/updates appreciated.
If there is any steps I can provide or give report access to my pc with the radio attached please let me know.
I don’t model making international calls either.
Malcolm Larkin VK2OTA
Sent from my iPhone
On Tue, Nov 7, 2017 at 2:39 PM, Malcolm Larkin malcolm.larkin@icloud.com wrote:
Hi all, I have done a search regarding support for the Baofeng GT-5TP as I didn’t find it in the list when connecting to it.
I recently got a couple as I have had UV-5R’s and wanted new less beaten up handhelds.
CHIRP doesn’t like them when selecting other model numbers, the results range from just timing out/reporting wrong model/ reporting too much data.
The CHIRP Site says to use “UV-82HP” It errors out with “Incorrect ‘Model’ selected” (on version “daily-20171104”)
I have been able to use the extremely hokey application from Baofeng called “UV82 Series Program Software.( US2S35 VIP Version)”
The details of firmware I can find when turning on are: (“3” when turning on) Ver N82301 (“5” when turning on) 160408N
Any suggestions/updates appreciated.
If there is any steps I can provide or give report access to my pc with the radio attached please let me know.
I don’t model making international calls either.
Malcolm Larkin VK2OTA
Load CHIRP. Download from radio to cause the error. Close CHIRP. Attach the debug.log file. How to locate the debug.log file is on the "How to report issues" page.
Jim
Attn: Jim Unroe
As requested when I tried to download from my Baofeng GT-5TP as a Baofeng UV-82HP (as website instructs) and getting the:
———————————- An error has occurred Incorrect ‘Model’ selected. ———————————
Attached is the debug.log file
Regards, Malcolm Larkin VK2OTA
Malcolm Larkin ...- -.- ..--- --- - .-
On 8 Nov 2017, at 10:02, Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Nov 7, 2017 at 2:39 PM, Malcolm Larkin malcolm.larkin@icloud.com wrote:
Hi all, I have done a search regarding support for the Baofeng GT-5TP as I didn’t find it in the list when connecting to it.
I recently got a couple as I have had UV-5R’s and wanted new less beaten up handhelds.
CHIRP doesn’t like them when selecting other model numbers, the results range from just timing out/reporting wrong model/ reporting too much data.
The CHIRP Site says to use “UV-82HP” It errors out with “Incorrect ‘Model’ selected” (on version “daily-20171104”)
I have been able to use the extremely hokey application from Baofeng called “UV82 Series Program Software.( US2S35 VIP Version)”
The details of firmware I can find when turning on are: (“3” when turning on) Ver N82301 (“5” when turning on) 160408N
Any suggestions/updates appreciated.
If there is any steps I can provide or give report access to my pc with the radio attached please let me know.
I don’t model making international calls either.
Malcolm Larkin VK2OTA
Load CHIRP. Download from radio to cause the error. Close CHIRP. Attach the debug.log file. How to locate the debug.log file is on the "How to report issues" page.
Jim _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Malcolm VK2OTA at malcolm.larkin@icloud.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Tue, Nov 7, 2017 at 11:40 PM, Malcolm Larkin malcolm.larkin@icloud.com wrote:
Attn: Jim Unroe
As requested when I tried to download from my Baofeng GT-5TP as a Baofeng UV-82HP (as website instructs) and getting the:
———————————- An error has occurred Incorrect ‘Model’ selected. ———————————
Attached is the debug.log file
Regards, Malcolm Larkin VK2OTA
The problem is that he radio is answering to the UV-82HP clone request as it should but then it responds back to CHIRP claiming to be a UV-5R type radio.
Jim
Attn:Jim,
So I tried to download selecting UV-5R and it times out.
Attached is the new debug.
Thank you
Malcolm
Malcolm Larkin ...- -.- ..--- --- - .-
On 8 Nov 2017, at 20:52, Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Nov 7, 2017 at 11:40 PM, Malcolm Larkin malcolm.larkin@icloud.com wrote:
Attn: Jim Unroe
As requested when I tried to download from my Baofeng GT-5TP as a Baofeng UV-82HP (as website instructs) and getting the:
———————————- An error has occurred Incorrect ‘Model’ selected. ———————————
Attached is the debug.log file
Regards, Malcolm Larkin VK2OTA
The problem is that he radio is answering to the UV-82HP clone request as it should but then it responds back to CHIRP claiming to be a UV-5R type radio.
Jim _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Malcolm VK2OTA at malcolm.larkin@icloud.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Wed, Nov 8, 2017 at 2:50 PM, Malcolm Larkin malcolm.larkin@icloud.com wrote:
Attn:Jim,
So I tried to download selecting UV-5R and it times out.
Attached is the new debug.
Thank you
Malcolm
Which would be expected. The UV-5R selection doesn't send the "magic" string that the radio needs to see to initiate cloning.
Jim
I have a quick question about my UV-5RA. I know many people on the list use this radio so this is the reason I am asking. I can not get it to turn on. I have tried a brand new charged batter and nothing. Any ideas. Thanks for your help. David
I read with a previous Boafeng model, the UV 3R, that if you hold down the U/V button on start-up, it will reset it. Someone else suggested holding down the monitor key while powering on. Also, holding down the button below the zero key locks/unlocks it. HTH. Glenn ----- Original Message ----- From: "David" weather@lightingunlimited.com To: chirp_users@intrepid.danplanet.com Sent: Wednesday, November 08, 2017 9:28 PM Subject: Re: [chirp_users] Baofeng UV5
I have a quick question about my UV-5RA. I know many people on the list use this radio so this is the reason I am asking. I can not get it to turn on. I have tried a brand new charged batter and nothing. Any ideas. Thanks for your help. David _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
If a fresh charged battery does not work you might consider something is wrong with the switch and return it for repair
On Wed, Nov 8, 2017 at 7:48 PM, Glenn At Home GlennErvin@cableone.net wrote:
I read with a previous Boafeng model, the UV 3R, that if you hold down the U/V button on start-up, it will reset it. Someone else suggested holding down the monitor key while powering on. Also, holding down the button below the zero key locks/unlocks it. HTH. Glenn ----- Original Message ----- From: "David" weather@lightingunlimited.com To: chirp_users@intrepid.danplanet.com Sent: Wednesday, November 08, 2017 9:28 PM Subject: Re: [chirp_users] Baofeng UV5
I have a quick question about my UV-5RA. I know many people on the list use this radio so this is the reason I am asking. I can not get it to turn on. I have tried a brand new charged batter and nothing. Any ideas. Thanks for your help. David _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Norman Sebern at nsebern14@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
participants (5)
-
David -
Glenn At Home -
Jim Unroe -
Malcolm Larkin -
Norman Sebern