[chirp_users] Programming IC-2200H
Hello there, I would like to learn step-by-step how to program my IC-2200H using Chirp Thank you
I have a IC-2000, and my understanding is it can't be programmed via Chirp. I had to do it by hand-manual. Does the IC-2200 have the connection available for the data cable to connect to computer? If not, then I don't think you will be able to use Chirp.
Good luck, John (kb3ywn)
On Fri, Oct 21, 2016 at 6:19 AM, Syahrul Saifuddin Md Thakhrim < 9w2tng@gmail.com> wrote:
Hello there, I would like to learn step-by-step how to program my IC-2200H using Chirp Thank you
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at kb3ywn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
The Icom IC-2200H is listed right there on the front page:
http://chirp.danplanet.com/projects/chirp/wiki/Home
Syahrul: Please read the Chirp documentation at http://chirp.danplanet.com/projects/chirp/wiki/Documentation and I'm sure you'll get it working. If you have specific questions, then contact this email list.
--David KI6ZHD
I have a 2200 and sprung $49 for RT systems cd and cable. I'm sure I could have figured it out after many hours but used cd and cable and loaded radio with all repeaters within 50 miles of my zip code in 4 minutes
Best,
Ken
On Oct 21, 2016, at 11:35, John Benson kb3ywn@gmail.com wrote:
I have a IC-2000, and my understanding is it can't be programmed via Chirp. I had to do it by hand-manual. Does the IC-2200 have the connection available for the data cable to connect to computer? If not, then I don't think you will be able to use Chirp.
Good luck, John (kb3ywn)
On Fri, Oct 21, 2016 at 6:19 AM, Syahrul Saifuddin Md Thakhrim 9w2tng@gmail.com wrote: Hello there, I would like to learn step-by-step how to program my IC-2200H using Chirp Thank you
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at kb3ywn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken at ualrhodes@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (4)
-
David Ranch -
John Benson -
Ken Rhodes -
Syahrul Saifuddin Md Thakhrim