I have a IC-2000, and my understanding is it can't be programmed via Chirp. I had to do it by hand-manual. Does the IC-2200 have the connection available for the data cable to connect to computer? If not, then I don't think you will be able to use Chirp.

Good luck,

John (kb3ywn)

On Fri, Oct 21, 2016 at 6:19 AM, Syahrul Saifuddin Md Thakhrim <9w2tng@gmail.com> wrote:

Hello there, I would like to learn step-by-step how to program my IC-2200H using Chirp

Thank you

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John  at kb3ywn@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ken at ualrhodes@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com