Hi Dan,

82C won't show by itself. It is integrated with the 82 in chirp. You first read from the 82C using the 82 on chirp. and then make your changes/freqs. In the advanced setting tab down at the bottom is your 2 options of locking the radio into memory mode and option of making your dual ptt into a single ptt. These 2 options make the radio conform to true Part 90 of the radio. That is the only 2 differences between the 82 and the 82C. Hope this helps explain.

Todd Bloomingdale​-KC9LOX​

Tomah, WI

On Fri, Apr 22, 2016 at 2:04 AM, Dan Jolley via chirp_users < chirp_users@intrepid.danplanet.com> wrote:

Recently I purchased a new BaoFeng UV-82C from Amazon.

When I try to load the UV-82C from Chirp, the only selection I get is UV-82. There is no UV-82C in the list.

I looked at the Chirp Website and the UV-82C is clearly listed by itself.

All the other UV-82 and variants were listed in a separate section.

I am using the current version of Chirp, 2016-04-19.

The box I received clearly said UV-82C, but on the back of the radio where the battery goes it said UV-82.

Is this nomal? Shouldn't the radio say UV-82C? There was a sticker that said it complied with Part 90 of the FCC Rules.

Above that it has FCC-ID:ZP5BF-82.

In Chirp when I go to SETTINGS, OTHER SETTINGS, I get the following:

Firmware Message 1: Ver Firmware Message 2: US2S25 6+Power-On Message 1: 160218N 6+Power-On Message 2: B820001

I don't see UV-82C anywhere in Chirp or the original BaoFeng programming software or on the radio itself.

I copied and pasted the list from the Chirp website showing the UV-82C is in a class by itself, but does not show up when I load Chirp to read from the radio. Could I have received a UV-82 by mistake instead of a UV-82C?

Any help or clarification on this issue is greatly appreciated. Sorry to trouble everyone with something so trivial, I know you have more important problems to solve. Thank you, Dan Jolley

PS - I have two BaoFeng BF-888s, four UV-5R and six UV-5RTP so I am very familiar with using Chirp. I am also using the FTDI cable with Windows 10 64 bit.

I copied and pasted the list of radios from the CHIRP Website below.

*Baofeng/Pofung*

• F-11
• UV-3R
• UV-5R *and variants*

http://chirp.danplanet.com/projects/chirp/wiki/Baofeng_UV5R_Variants

• UV-6
• UV-82/82L/82X

*Also includes the GT-5*

• UV-82C
• UV-82HP/82DX/82HX
• UV-B5/B6

*Also includes the BF-V85*

• BF-666S/777S/888S

*Also includes the GT-1*

• BF-F8HP

*Also includes the BF-A58* *Also includes the BF-F9V2+* *Also includes the GT-3TP* *Also includes the UV-5RTP* *Also includes the UV-5R7W*

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to tbloomingdale@gmail.com at tbloomingdale@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com