Hi Dan,

82C won't show by itself.
 It is integrated with the 82 in chirp. You first read from the 82C using the 82 on chirp. and then make your changes/freqs. In the advanced setting tab down at the bottom is your 2 options of locking the radio into memory mode and option of making your dual ptt into a single ptt. These 2 options make the radio conform to true Part 90 of the radio. That is the only 2 differences between the 82 and the 82C. Hope this helps explain. 

Todd Bloomingdale​-KC9LOX​

Tomah, WI


On Fri, Apr 22, 2016 at 2:04 AM, Dan Jolley via chirp_users <chirp_users@intrepid.danplanet.com> wrote:
Recently I purchased a new BaoFeng UV-82C from Amazon.

When I try to load the UV-82C from Chirp, the only selection I get is UV-82. There is no UV-82C in the list.

I looked at the Chirp Website and the UV-82C is clearly listed by itself.

All the other UV-82 and variants were listed in a separate section.

I am using the current version of Chirp, 2016-04-19.

The box I received clearly said UV-82C, but on the back of the radio where the battery goes it said UV-82.

Is this nomal? Shouldn't the radio say UV-82C? There was a sticker that said it complied with Part 90 of the FCC Rules.

Above that it has FCC-ID:ZP5BF-82.

In Chirp when I go to SETTINGS, OTHER SETTINGS, I get the following:

Firmware Message 1: Ver
Firmware Message 2: US2S25
6+Power-On Message 1: 160218N
6+Power-On Message 2: B820001

I don't see UV-82C anywhere in Chirp or the original BaoFeng programming software or on the radio itself.

I copied and pasted the list from the Chirp website showing the UV-82C is in a class by itself, but does not show up when I load Chirp to read from the radio.
Could I have received a UV-82 by mistake instead of a UV-82C?

Any help or clarification on this issue is greatly appreciated. Sorry to trouble everyone with something so trivial, I know you have more important problems to solve.
Thank you,
Dan Jolley

PS - I have two BaoFeng BF-888s, four UV-5R and six UV-5RTP so I am very familiar with using Chirp. I am also using the FTDI cable with Windows 10 64 bit.

I copied and pasted the list of radios from the CHIRP Website below.

Baofeng/Pofung
  • F-11
  • UV-3R
  • UV-5R and variants
  • UV-6
  • UV-82/82L/82X
    Also includes the GT-5
  • UV-82C
  • UV-82HP/82DX/82HX
  • UV-B5/B6
    Also includes the BF-V85
  • BF-666S/777S/888S
    Also includes the GT-1
  • BF-F8HP
    Also includes the BF-A58
    Also includes the BF-F9V2+
    Also includes the GT-3TP
    Also includes the UV-5RTP
    Also includes the UV-5R7W

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to tbloomingdale@gmail.com at tbloomingdale@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com