[chirp_users] Cut and Paste
I use Chirp to program my FT-70D.
Is it possible to have Cut and Paste between opened images (.img files).
73, Wayne (VK6VE)
Absolutely! Obviously, it doesn't work for "Settings", but your spreadsheet of frequencies, names, etc., can be cut and pasted just like Lotus 1-2-3, etc., between any two files. Chris, WD1E
On 7/21/2022 5:32 AM, Wayne wrote:
I use Chirp to program my FT-70D.
Is it possible to have Cut and Paste between opened images (.img files).
73, Wayne (VK6VE) _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Christopher Knowles at cknowles@tiac.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Terminology is critical. I believe you mean copy and paste. Too many people use the term cut and paste and it can cause problems if copy is what was meant. But, yes, I copy from one window and paste into another Chirp window. Glenn ----- Original Message ----- From: "Wayne" wildcat32@iinet.net.au To: "Chirp Users" chirp_users@intrepid.danplanet.com Sent: Thursday, July 21, 2022 4:32 AM Subject: [chirp_users] Cut and Paste
I use Chirp to program my FT-70D.
Is it possible to have Cut and Paste between opened images (.img files).
73, Wayne (VK6VE) _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Terminology is indeed critical, as is answering the question that was asked. So ...
It is possible to cut from on .img and paste to another. I just did that to be sure before I answered.
But, unless you're cutting out a selection to paste into another radio (so that you have two probably distinct sets of frequencies) what you probably want to do is to copy and paste.
There was that diplomatic enough to escape the pedants here? //al
------ Original Message ------
From "K0LNY_Glenn" glenn@ervin.email
To "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Date Thu 7 21 22 11:44:44 Subject Re: [chirp_users] Cut and Paste
Terminology is critical. I believe you mean copy and paste. Too many people use the term cut and paste and it can cause problems if copy is what was meant. But, yes, I copy from one window and paste into another Chirp window. Glenn ----- Original Message ----- From: "Wayne" wildcat32@iinet.net.au To: "Chirp Users" chirp_users@intrepid.danplanet.com Sent: Thursday, July 21, 2022 4:32 AM Subject: [chirp_users] Cut and Paste
I use Chirp to program my FT-70D.
Is it possible to have Cut and Paste between opened images (.img files).
73, Wayne (VK6VE) _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I cut and paste between open images (.img files) quite often. I'm just careful when I do not to save the file I cut from or at least give it the ole Ctrl-Z before I close it. Oddly enough...copy and paste has the same effect.
73, Steve
On 7/21/2022 2:32 PM, Al Jones wrote:
Terminology is indeed critical, as is answering the question that was asked. So ...
It is possible to cut from on .img and paste to another. I just did that to be sure before I answered.
But, unless you're cutting out a selection to paste into another radio (so that you have two probably distinct sets of frequencies) what you probably want to do is to copy and paste.
There was that diplomatic enough to escape the pedants here? //al
------ Original Message ------
From "K0LNY_Glenn" glenn@ervin.email
To "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Date Thu 7 21 22 11:44:44 Subject Re: [chirp_users] Cut and Paste
Terminology is critical. I believe you mean copy and paste. Too many people use the term cut and paste and it can cause problems if copy is what was meant. But, yes, I copy from one window and paste into another Chirp window. Glenn ----- Original Message ----- From: "Wayne" wildcat32@iinet.net.au To: "Chirp Users" chirp_users@intrepid.danplanet.com Sent: Thursday, July 21, 2022 4:32 AM Subject: [chirp_users] Cut and Paste
I use Chirp to program my FT-70D.
Is it possible to have Cut and Paste between opened images (.img files).
73, Wayne (VK6VE) _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to n0xvz.1@gmail.com at n0xvz.1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
'Cut and Paste' is used to move data from one location to another, usually in the same document, and makes permanent changes to the source material.
'Copy and Paste' is much more commonly used when duplicating data from one location to another, and has no effect on the source material.
///Andy
On Fri, Jul 22, 2022 at 2:41 PM Steve Horning n0xvz.1@gmail.com wrote:
I cut and paste between open images (.img files) quite often. I'm just careful when I do not to save the file I cut from or at least give it the ole Ctrl-Z before I close it. Oddly enough...copy and paste has the same effect.
73, Steve
On 7/21/2022 2:32 PM, Al Jones wrote:
Terminology is indeed critical, as is answering the question that was asked. So ...
It is possible to cut from on .img and paste to another. I just did that to be sure before I answered.
But, unless you're cutting out a selection to paste into another radio (so that you have two probably distinct sets of frequencies) what you probably want to do is to copy and paste.
There was that diplomatic enough to escape the pedants here? //al
------ Original Message ------
From "K0LNY_Glenn" glenn@ervin.email
To "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Date Thu 7 21 22 11:44:44 Subject Re: [chirp_users] Cut and Paste
Terminology is critical. I believe you mean copy and paste. Too many people use the term cut and paste and it can cause problems if
copy is what was meant.
But, yes, I copy from one window and paste into another Chirp window. Glenn ----- Original Message ----- From: "Wayne" wildcat32@iinet.net.au To: "Chirp Users" chirp_users@intrepid.danplanet.com Sent: Thursday, July 21, 2022 4:32 AM Subject: [chirp_users] Cut and Paste
I use Chirp to program my FT-70D.
Is it possible to have Cut and Paste between opened images (.img files).
73, Wayne (VK6VE) _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to n0xvz.1@gmail.com at n0xvz.1@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-owner@intrepid.danplanet.com
-- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to babj615@gmail.com at babj615@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Yes, and indiscriminately using the terms may cause data loss. That is why I point it out when I think someone really means copy and paste. Glenn ----- Original Message ----- From: babj615 To: Discussion of CHIRP Sent: Friday, July 22, 2022 6:01 PM Subject: Re: [chirp_users] Cut and Paste
'Cut and Paste' is used to move data from one location to another, usually in the same document, and makes permanent changes to the source material.
'Copy and Paste' is much more commonly used when duplicating data from one location to another, and has no effect on the source material.
///Andy
On Fri, Jul 22, 2022 at 2:41 PM Steve Horning n0xvz.1@gmail.com wrote:
I cut and paste between open images (.img files) quite often. I'm just careful when I do not to save the file I cut from or at least give it the ole Ctrl-Z before I close it. Oddly enough...copy and paste has the same effect.
73, Steve
On 7/21/2022 2:32 PM, Al Jones wrote:
Terminology is indeed critical, as is answering the question that was asked. So ...
It is possible to cut from on .img and paste to another. I just did that to be sure before I answered.
But, unless you're cutting out a selection to paste into another radio (so that you have two probably distinct sets of frequencies) what you probably want to do is to copy and paste.
There was that diplomatic enough to escape the pedants here? //al
------ Original Message ------
From "K0LNY_Glenn" glenn@ervin.email
To "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Date Thu 7 21 22 11:44:44 Subject Re: [chirp_users] Cut and Paste
Terminology is critical. I believe you mean copy and paste. Too many people use the term cut and paste and it can cause problems if copy is what was meant. But, yes, I copy from one window and paste into another Chirp window. Glenn ----- Original Message ----- From: "Wayne" wildcat32@iinet.net.au To: "Chirp Users" chirp_users@intrepid.danplanet.com Sent: Thursday, July 21, 2022 4:32 AM Subject: [chirp_users] Cut and Paste
I use Chirp to program my FT-70D.
Is it possible to have Cut and Paste between opened images (.img files).
73, Wayne (VK6VE) _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to n0xvz.1@gmail.com at n0xvz.1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
-- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to babj615@gmail.com at babj615@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
--------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I cut and paste between open images (.img files) quite often. I'm just careful when I do not to save the file I cut from or at least give it the ole Ctrl-Z before I close it. Oddly enough...copy and paste has the same affect.
73, Steve
On 7/21/2022 2:32 PM, Al Jones wrote:
Terminology is indeed critical, as is answering the question that was asked. So ...
It is possible to cut from on .img and paste to another. I just did that to be sure before I answered.
But, unless you're cutting out a selection to paste into another radio (so that you have two probably distinct sets of frequencies) what you probably want to do is to copy and paste.
There was that diplomatic enough to escape the pedants here? //al
------ Original Message ------
From "K0LNY_Glenn" glenn@ervin.email glenn@ervin.email
To "Discussion of CHIRP" chirp_users@intrepid.danplanet.com chirp_users@intrepid.danplanet.com Date Thu 7 21 22 11:44:44 Subject Re: [chirp_users] Cut and Paste
Terminology is critical. I believe you mean copy and paste. Too many people use the term cut and paste and it can cause problems if copy is what was meant. But, yes, I copy from one window and paste into another Chirp window. Glenn ----- Original Message ----- From: "Wayne" wildcat32@iinet.net.au wildcat32@iinet.net.au To: "Chirp Users" chirp_users@intrepid.danplanet.com chirp_users@intrepid.danplanet.com Sent: Thursday, July 21, 2022 4:32 AM Subject: [chirp_users] Cut and Paste
I use Chirp to program my FT-70D.
Is it possible to have Cut and Paste between opened images (.img files).
73, Wayne (VK6VE) _______________________________________________ chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com _______________________________________________ chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to n0xvz.1@gmail.com at n0xvz.1@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
participants (6)
-
Al Jones -
babj615 -
Christopher Knowles -
K0LNY_Glenn -
Steve Horning -
Wayne