Yep, it is a local university that I am going to be working at and found that their security had a freq, i thought I would listen in, listen only, but it looked weird to me. I was able to program a channel in my ht but only get some weird noise, I was wondering if there was some translation required that needed those c12 and type R values to make it audible....if it is at all, maybe it is just digital signal in general and I would not be able to get anything out of it.

Really just curious to see what it was as i had not come across those values before. good winds Rob

Re: [chirp_users] question on configuring a frequency To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: 24CB14B8-61A5-4A67-847B-297CE6C3CE2D@n2vip.org Content-Type: text/plain; charset="utf-8"

So a quick google leads me to believe this is a law enforcement frequency, so I'll ask what is the service you hope to monitor? Where did you get that listing? If we know what you hope to monitor, we may find an alternate source for the information. That C12 tone setting looks vendor-specific, it likely 'maps' to either a standard DCS or CTCSS tone.

Unless it is a digital mode Color code, but that feels unlikely...

Ken

On Tue, Jan 23, 2024 at 3:02 PM chirp_users-request@intrepid.danplanet.com wrote:

Send chirp_users mailing list submissions to chirp_users@intrepid.danplanet.com

To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request@intrepid.danplanet.com

You can reach the person managing the list at chirp_users-owner@intrepid.danplanet.com

When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..."

Today's Topics:

1. question on configuring a frequency (rob banks)
2. Re: question on configuring a frequency (Jeffrey Vian)
3. Re: question on configuring a frequency (Ken Hansen)
4. Re: question on configuring a frequency (Jim Unroe)

---

Message: 1 Date: Mon, 22 Jan 2024 15:14:55 -0500 From: rob banks corgimas@gmail.com Subject: [chirp_users] question on configuring a frequency To: chirp_users@intrepid.danplanet.com Message-ID: < CAMLd8jVTSjeXyWE8phNJkFLQ-pqAqBUP3BjZGD0q6xdZo8NHLw@mail.gmail.com> Content-Type: text/plain; charset="utf-8"

I have a baofeng F8HP that I would like to add a frequency to. The details I have are as follows Frequency: 472.6125 Type R Tone C12 How can I input that Type and Tone value in Chirp? Can I? Thank you Rob