[chirp_users] Programming
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean
Dean,
If I understand your request, you are trying to program a channel with different TX & RX PL/CTCSS tones, correct?
What model radio are you trying to program?
Ken, N2VIP
On Sep 20, 2022, at 19:59, D Bunk w3jfr01@gmail.com wrote:
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Dean, What ham band are you trying to program this for? Are you sure you have the frequencies correct? Dean KC9REN
On 9/20/2022 8:02 PM, Ken Hansen wrote:
Dean,
If I understand your request, you are trying to program a channel with different TX & RX PL/CTCSS tones, correct?
What model radio are you trying to program?
Ken, N2VIP
On Sep 20, 2022, at 19:59, D Bunk w3jfr01@gmail.com wrote:
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean Berglund at deanberg2044@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Gentleman, Thank you for the replies. I have an Anytone778UV. I know I have the driver and so forth as I have programmed the radio twice already. I know it seems a little weird but one of the repeaters in town was having some interference from an AM radio station so they had to split the codes to get it to work. I will try the cross section in the drop down box. One other question what if I need an encode only on the frequency?
/r Dean - W3JFR
On Sep 20, 2022, at 21:20, Dean Berglund deanberg2044@gmail.com wrote:
Dean, What ham band are you trying to program this for? Are you sure you have the frequencies correct? Dean KC9REN
On 9/20/2022 8:02 PM, Ken Hansen wrote: Dean,
If I understand your request, you are trying to program a channel with different TX & RX PL/CTCSS tones, correct?
What model radio are you trying to program?
Ken, N2VIP
On Sep 20, 2022, at 19:59, D Bunk w3jfr01@gmail.com wrote:
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean Berglund at deanberg2044@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- This email has been checked for viruses by Avast antivirus software. www.avast.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean at w3jfr01@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
This may assist. Section 6 of this link has guides and examples. https://www.miklor.com/COM/UV_CHIRP.php
Stay safe and healthy. John ‘Miklor’
On Sep 20, 2022, at 9:30 PM, D Bunk w3jfr01@gmail.com wrote:
Gentleman, Thank you for the replies. I have an Anytone778UV. I know I have the driver and so forth as I have programmed the radio twice already. I know it seems a little weird but one of the repeaters in town was having some interference from an AM radio station so they had to split the codes to get it to work. I will try the cross section in the drop down box. One other question what if I need an encode only on the frequency?
/r Dean - W3JFR
On Sep 20, 2022, at 21:20, Dean Berglund deanberg2044@gmail.com wrote:
Dean, What ham band are you trying to program this for? Are you sure you have the frequencies correct? Dean KC9REN
On 9/20/2022 8:02 PM, Ken Hansen wrote:
Dean,
If I understand your request, you are trying to program a channel with different TX & RX PL/CTCSS tones, correct?
What model radio are you trying to program?
Ken, N2VIP
On Sep 20, 2022, at 19:59, D Bunk w3jfr01@gmail.com wrote:
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean Berglund at deanberg2044@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- This email has been checked for viruses by Avast antivirus software. www.ava
On Tue, Sep 20, 2022 at 9:31 PM D Bunk w3jfr01@gmail.com wrote:
Gentleman, Thank you for the replies. I have an Anytone778UV. I know I have the driver and so forth as I have programmed the radio twice already. I know it seems a little weird but one of the repeaters in town was having some interference from an AM radio station so they had to split the codes to get it to work. I will try the cross section in the drop down box. One other question what if I need an encode only on the frequency?
/r Dean - W3JFR
You never have to have a receive tone. No receive tone always works. So to program your first example with a TX tone only and RX is left as carrier squelch only...
Tone Mode: Tone Tone: 123.7
Jim KC9HI
The original Dean, unless I'm reading this way wrong, you're wanting to receive an FM Broadcast signal - that would be WFUS out of Tampa Bay - and wanting to retransmit it on an aircraft band. I seriously doubt that even the Chinese radios are going to let you do that. They've been limited to the general hams bands (the old ones also worked on the GMRS bands) but as I'm reading your request, you're way out of those. Inquiring minds ant to know: Whatcha trying to do??
------ Original Message ------
From "Dean Berglund" deanberg2044@gmail.com
To chirp_users@intrepid.danplanet.com Date Tue 9 20 22 20:20:12 Subject Re: [chirp_users] Programming
Dean, What ham band are you trying to program this for? Are you sure you have the frequencies correct? Dean KC9REN
On 9/20/2022 8:02 PM, Ken Hansen wrote:
Dean,
If I understand your request, you are trying to program a channel with different TX & RX PL/CTCSS tones, correct?
What model radio are you trying to program?
Ken, N2VIP
On Sep 20, 2022, at 19:59, D Bunk w3jfr01@gmail.com wrote:
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean Berglund at deanberg2044@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- This email has been checked for viruses by Avast antivirus software. www.avast.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Al,
You completely misread what dean wants to do:
His local repeater had interference from an AM broadcast station, so to eliminate the interference, they went to split tones on the repeater.
A second question was raised about only encoding his transmissions, not using a 'tone squelch' on another (different) repeater.
I have no idea how you turned interference from an AM station into receiving an FM broadcast and the re-transmit that FM signal on the AM aircraft band.
Ken, N2VIP
On Sep 20, 2022, at 20:36, Al Jones al@aljones.us wrote:
The original Dean, unless I'm reading this way wrong, you're wanting to receive an FM Broadcast signal - that would be WFUS out of Tampa Bay - and wanting to retransmit it on an aircraft band. I seriously doubt that even the Chinese radios are going to let you do that. They've been limited to the general hams bands (the old ones also worked on the GMRS bands) but as I'm reading your request, you're way out of those. Inquiring minds ant to know: Whatcha trying to do??
------ Original Message ------ From "Dean Berglund" deanberg2044@gmail.com To chirp_users@intrepid.danplanet.com Date Tue 9 20 22 20:20:12 Subject Re: [chirp_users] Programming
Dean, What ham band are you trying to program this for? Are you sure you have the frequencies correct? Dean KC9REN
On 9/20/2022 8:02 PM, Ken Hansen wrote: Dean,
If I understand your request, you are trying to program a channel with different TX & RX PL/CTCSS tones, correct?
What model radio are you trying to program?
Ken, N2VIP
On Sep 20, 2022, at 19:59, D Bunk w3jfr01@gmail.com wrote:
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean Berglund at deanberg2044@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- This email has been checked for viruses by Avast antivirus software. www.avast.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Ken, I read "I am trying to program a radio with a receive of 103.5 and a transmit of 123.7" and since you all know so much more than I, I'm out of here.
------ Original Message ------
From "Ken Hansen" ken@n2vip.org
To "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Date Tue 9 20 22 20:46:44 Subject Re: [chirp_users] Programming
Al,
You completely misread what dean wants to do:
His local repeater had interference from an AM broadcast station, so to eliminate the interference, they went to split tones on the repeater.
A second question was raised about only encoding his transmissions, not using a 'tone squelch' on another (different) repeater.
I have no idea how you turned interference from an AM station into receiving an FM broadcast and the re-transmit that FM signal on the AM aircraft band.
Ken, N2VIP
On Sep 20, 2022, at 20:36, Al Jones al@aljones.us wrote:
The original Dean, unless I'm reading this way wrong, you're wanting to receive an FM Broadcast signal - that would be WFUS out of Tampa Bay - and wanting to retransmit it on an aircraft band. I seriously doubt that even the Chinese radios are going to let you do that. They've been limited to the general hams bands (the old ones also worked on the GMRS bands) but as I'm reading your request, you're way out of those. Inquiring minds ant to know: Whatcha trying to do??
------ Original Message ------ From "Dean Berglund" deanberg2044@gmail.com To chirp_users@intrepid.danplanet.com Date Tue 9 20 22 20:20:12 Subject Re: [chirp_users] Programming
Dean, What ham band are you trying to program this for? Are you sure you have the frequencies correct? Dean KC9REN
On 9/20/2022 8:02 PM, Ken Hansen wrote: Dean,
If I understand your request, you are trying to program a channel with different TX & RX PL/CTCSS tones, correct?
What model radio are you trying to program?
Ken, N2VIP
On Sep 20, 2022, at 19:59, D Bunk w3jfr01@gmail.com wrote:
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean Berglund at deanberg2044@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- This email has been checked for viruses by Avast antivirus software. www.avast.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
On Tue, Sep 20, 2022 at 10:03 PM Al Jones al@aljones.us wrote:
Ken, I read "I am trying to program a radio with a receive of 103.5 and a transmit of 123.7" and since you all know so much more than I, I'm out of here.
... with a receive {CTCSS tone} of 103.5 {Hz} and a transmit {CTCSS tone} of 123.7 {Hz}.
Jim KC9HI
Thanks Jim
------ Original Message ------
From "Jim Unroe" rock.unroe@gmail.com
To "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Date Tue 9 20 22 21:14:38 Subject Re: [chirp_users] Programming
On Tue, Sep 20, 2022 at 10:03 PM Al Jones al@aljones.us wrote:
Ken, I read "I am trying to program a radio with a receive of 103.5 and a transmit of 123.7" and since you all know so much more than I, I'm out of here.
... with a receive {CTCSS tone} of 103.5 {Hz} and a transmit {CTCSS tone} of 123.7 {Hz}.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Gentlemen, This was copied right off the webpage and may provide additional information.
Use the Downtown Receiver as noted below. 103.5 Hz CTCSS transmit and 127.3 Hz CTCSS receive (or disable CTCSS when receiving). VHF: Input 146.1 MHz Output 146.7 MHz
The other questions I asked was because I received this text about a friends repeater: 147.135 - Tone encode only of 127.3
again Thanks Dean W3JFR
On Tue, Sep 20, 2022 at 10:15 PM Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Sep 20, 2022 at 10:03 PM Al Jones al@aljones.us wrote:
Ken, I read "I am trying to program a radio with a receive of 103.5 and a transmit of 123.7" and since you all know so much more than I, I'm out of here.
... with a receive {CTCSS tone} of 103.5 {Hz} and a transmit {CTCSS tone} of 123.7 {Hz}.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean at w3jfr01@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
If I am understanding you correctly, I have input these numbers into Chirp and they seem to take. Maybe this will help you. Dean KC9REN
On 9/20/2022 9:33 PM, D Bunk wrote:
Gentlemen, This was copied right off the webpage and may provide additional information.
Use the Downtown Receiver as noted below. 103.5 Hz CTCSS transmit and 127.3 Hz CTCSS receive (or disable CTCSS when receiving). VHF: Input 146.1 MHz Output 146.7 MHz
The other questions I asked was because I received this text about a friends repeater: 147.135 - Tone encode only of 127.3
again Thanks Dean W3JFR
On Tue, Sep 20, 2022 at 10:15 PM Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Sep 20, 2022 at 10:03 PM Al Jones <al@aljones.us> wrote: > > Ken, I read "I am trying to program a radio with a receive of 103.5 and > a transmit of 123.7" and since you all know so much more than I, I'm > out of here. ... with a receive {CTCSS tone} of 103.5 {Hz} and a transmit {CTCSS tone} of 123.7 {Hz}. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean at w3jfr01@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean Berglund atdeanberg2044@gmail.com To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please emailchirp_users-owner@intrepid.danplanet.com Searchable archive:https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Dean,
From what you have, he would have to change the split, you have 500 kHz split.
JaxRadio.net https://jaxradio.net/repeater.html
W4IZ REPEATER SYSTEM
VHF: Input 146.1 MHz Output 146.7 MHz
UHF: Input 449.4 MHz Output 444.4 MHz
127.3 Hz CTCSS Tone
-------------------------------------------
Until further notice, the W4IZ/R Dames Point receiver is not available. Use the Downtown Receiver as noted below. 103.5 Hz CTCSS transmit and 127.3 Hz CTCSS receive (or disable CTCSS when receiving).
-------------------------------------------
To Use Downtown VHF Receiver, transmit a 103.5 Hz CTCSS Tone
To Use Dames Point VHF Receiver, transmit a 127.3 Hz CTCSS Tone
Tone Decode Squelch must pass 127.3 Hz CTCSS Tone.
On Tue, Sep 20, 2022 at 11:56 PM Dean Berglund deanberg2044@gmail.com wrote:
If I am understanding you correctly, I have input these numbers into Chirp and they seem to take. Maybe this will help you. Dean KC9REN
On 9/20/2022 9:33 PM, D Bunk wrote:
Gentlemen, This was copied right off the webpage and may provide additional information.
Use the Downtown Receiver as noted below. 103.5 Hz CTCSS transmit and 127.3 Hz CTCSS receive (or disable CTCSS when receiving). VHF: Input 146.1 MHz Output 146.7 MHz
The other questions I asked was because I received this text about a friends repeater: 147.135 - Tone encode only of 127.3
again Thanks Dean W3JFR
On Tue, Sep 20, 2022 at 10:15 PM Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Sep 20, 2022 at 10:03 PM Al Jones al@aljones.us wrote:
Ken, I read "I am trying to program a radio with a receive of 103.5 and a transmit of 123.7" and since you all know so much more than I, I'm out of here.
... with a receive {CTCSS tone} of 103.5 {Hz} and a transmit {CTCSS tone} of 123.7 {Hz}.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean at w3jfr01@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean Berglund at deanberg2044@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Virus-free.www.avast.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
If the radio would allow it, you would do split frequencies, not tones, like I did with my Baofeng so I could receive the ISS on the 440 band and transmit on the 2M band. Glenn ----- Original Message ----- From: "Ken Hansen" ken@n2vip.org To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Tuesday, September 20, 2022 8:46 PM Subject: Re: [chirp_users] Programming
Al,
You completely misread what dean wants to do:
His local repeater had interference from an AM broadcast station, so to eliminate the interference, they went to split tones on the repeater.
A second question was raised about only encoding his transmissions, not using a 'tone squelch' on another (different) repeater.
I have no idea how you turned interference from an AM station into receiving an FM broadcast and the re-transmit that FM signal on the AM aircraft band.
Ken, N2VIP
On Sep 20, 2022, at 20:36, Al Jones al@aljones.us wrote:
The original Dean, unless I'm reading this way wrong, you're wanting to receive an FM Broadcast signal - that would be WFUS out of Tampa Bay - and wanting to retransmit it on an aircraft band. I seriously doubt that even the Chinese radios are going to let you do that. They've been limited to the general hams bands (the old ones also worked on the GMRS bands) but as I'm reading your request, you're way out of those. Inquiring minds ant to know: Whatcha trying to do??
------ Original Message ------ From "Dean Berglund" deanberg2044@gmail.com To chirp_users@intrepid.danplanet.com Date Tue 9 20 22 20:20:12 Subject Re: [chirp_users] Programming
Dean, What ham band are you trying to program this for? Are you sure you have the frequencies correct? Dean KC9REN
On 9/20/2022 8:02 PM, Ken Hansen wrote: Dean,
If I understand your request, you are trying to program a channel with different TX & RX PL/CTCSS tones, correct?
What model radio are you trying to program?
Ken, N2VIP
On Sep 20, 2022, at 19:59, D Bunk w3jfr01@gmail.com wrote:
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean Berglund at deanberg2044@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- This email has been checked for viruses by Avast antivirus software. www.avast.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Al Jones at al@aljones.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Apologies, I have no idea what happened to my previous note - this is how it came back to me.
Very odd, apparently though some people got it - at least Al seems to have gotten the note in the clear, based on his response.
Ken, N2VIP
On Sep 20, 2022, at 20:47, Ken Hansen ken@n2vip.org wrote:
QWwsCgpZb3UgY29tcGxldGVseSBtaXNyZWFkIHdoYXQgZGVhbiB3YW50cyB0byBkbzoKCkhpcyBs b2NhbCByZXBlYXRlciBoYWQgaW50ZXJmZXJlbmNlIGZyb20gYW4gQU0gYnJvYWRjYXN0IHN0YXRp
Dean, You don't say what radio you have. Do you know if you have the correct cable and driver for the cable? I would be happy to try to help you but I need some more information first. You don't say what part of the programming you need help with. 73, Dean KC9REN
On 9/20/2022 7:58 PM, D Bunk wrote:
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dean Berglund at deanberg2044@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
On Tue, Sep 20, 2022 at 9:00 PM D Bunk w3jfr01@gmail.com wrote:
Gentlemen, I need some help please. I am trying to program a radio with a receive of 103.5 and a transmit of 123.7 and can not figure out how.
/r W3JFR / WRTG789 Dean
Assuming that your radio supports it...
Tone Mode: Cross Cross Mode: Tone->Tone Tone: 123.7 ToneSql: 103.5
Jim KC9HI
participants (8)
-
Al Jones -
D Bunk -
D.J.J. Ring, Jr. -
Dean Berglund -
Jim Unroe -
John LaMartina -
K0LNY_Glenn -
Ken Hansen