If I am understanding you correctly, I have input these numbers into Chirp and they seem to take. Maybe this will help you.
Dean KC9REN


On 9/20/2022 9:33 PM, D Bunk wrote:
Gentlemen, 
This was copied right off the webpage and may provide additional information. 

 Use the Downtown Receiver as noted below.   103.5 Hz CTCSS transmit and 127.3 Hz CTCSS receive (or disable CTCSS when receiving).
VHF: Input 146.1 MHz Output 146.7 MHz

The other questions I asked was because I received this text about a friends repeater: 
147.135 - Tone encode only of 127.3

again 
Thanks 
Dean W3JFR

On Tue, Sep 20, 2022 at 10:15 PM Jim Unroe <rock.unroe@gmail.com> wrote:
On Tue, Sep 20, 2022 at 10:03 PM Al Jones <al@aljones.us> wrote:
>
> Ken, I read  "I am trying to program a radio with a receive of 103.5 and
> a transmit of 123.7"  and since you all know so much more than I, I'm
> out of here.

... with a receive {CTCSS tone} of 103.5 {Hz} and a transmit {CTCSS
tone} of 123.7 {Hz}.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dean at w3jfr01@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dean Berglund at deanberg2044@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com


 width=Virus-free.www.avast.com