Re: [chirp_users] New User Guide for Baofeng UV 82L
Craig,
For the longest time, the only way I knew how to program my UV-82, was using CHIRP. The first video below lifted my blinders:
https://www.youtube.com/watch?v=CrG0El1KkIM
I didn't have to much to start using CHIRP, other than roll back to a previous version of the driver, as advised on MILKOR, but the video below may help you.
https://www.youtube.com/watch?v=jwcgBDI3vTo
Hope that helps you get going.
-baji.
~~ K 8 I I T _
On Sat, Apr 1, 2017 at 7:14 AM, Craig Kalsa wrote:
Hello - I am new to ham radio and studying for my license as a casual user
/ prepper. I have 2 new 82Ls and have spent a great deal of time trying to find a video on YouTube that can get me up and running in the 28205 / Charlotte area. So far, I have been in Miklor and CHIRP but can't figure out how to find, program and enjoy my radio. I have loaded the correct cable drivers, downloaded my factory image and have found various lists of pubic safety and amateur frequencies; even donated to CHRIP. I want to listen, scan and use as two-way while camping. Is there a good reference, video or otherwise that can help get me up and running? Regards, Craig
_
This is off topic, but you can look up an app called repeaterbook. This will provide some local frequencies for you to monitor.
Walt N6STM
On Apr 1, 2017 10:45 AM, "Baji Panchumarti" ohiobaji@gmail.com wrote:
Craig,
For the longest time, the only way I knew how to program my UV-82, was using CHIRP. The first video below lifted my blinders:
https://www.youtube.com/watch?v=CrG0El1KkIMI didn't have to much to start using CHIRP, other than roll back to a previous version of the driver, as advised on MILKOR, but the video below may help you.
https://www.youtube.com/watch?v=jwcgBDI3vToHope that helps you get going.
-baji.
~~ K 8 I I T _
On Sat, Apr 1, 2017 at 7:14 AM, Craig Kalsa wrote:
Hello - I am new to ham radio and studying for my license as a casual user
/ prepper. I have 2 new 82Ls and have spent a great deal of time trying to find a video on YouTube that can get me up and running in the 28205 / Charlotte area. So far, I have been in Miklor and CHIRP but can't figure out how to find, program and enjoy my radio. I have loaded the correct cable drivers, downloaded my factory image and have found various lists of pubic safety and amateur frequencies; even donated to CHRIP. I want to listen, scan and use as two-way while camping. Is there a good reference, video or otherwise that can help get me up and running? Regards, Craig
_
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Walt Childson at wchildson@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
Walt, thank you, that is not just on-target, it's a bullseye!
On Sat, Apr 1, 2017 at 3:46 PM Walt Childson wchildson@gmail.com wrote:
This is off topic, but you can look up an app called repeaterbook. This will provide some local frequencies for you to monitor.
Walt N6STM
On Apr 1, 2017 10:45 AM, "Baji Panchumarti" ohiobaji@gmail.com wrote:
Craig,
For the longest time, the only way I knew how to program my UV-82, was using CHIRP. The first video below lifted my blinders:
https://www.youtube.com/watch?v=CrG0El1KkIMI didn't have to much to start using CHIRP, other than roll back to a previous version of the driver, as advised on MILKOR, but the video below may help you.
https://www.youtube.com/watch?v=jwcgBDI3vToHope that helps you get going.
-baji.
~~ K 8 I I T _
On Sat, Apr 1, 2017 at 7:14 AM, Craig Kalsa wrote:
Hello - I am new to ham radio and studying for my license as a casual user / prepper. I have 2 new 82Ls and have spent a great deal of time trying to find a video on YouTube that can get me up and running in the 28205 / Charlotte area. So far, I have been in Miklor and CHIRP but can't figure out how to find, program and enjoy my radio. I have loaded the correct cable drivers, downloaded my factory image and have found various lists of pubic safety and amateur frequencies; even donated to CHRIP. I want to listen, scan and use as two-way while camping. Is there a good reference, video or otherwise that can help get me up and running? Regards, Craig
_
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Walt Childson at wchildson@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Craig Kalsa at craigkalsa@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Thanks Walt! I just downloaded the app also
On Apr 1, 2017 2:58 PM, "Craig Kalsa" craigkalsa@gmail.com wrote:
Walt, thank you, that is not just on-target, it's a bullseye!
On Sat, Apr 1, 2017 at 3:46 PM Walt Childson wchildson@gmail.com wrote:
This is off topic, but you can look up an app called repeaterbook. This will provide some local frequencies for you to monitor.
Walt N6STM
On Apr 1, 2017 10:45 AM, "Baji Panchumarti" ohiobaji@gmail.com wrote:
Craig,
For the longest time, the only way I knew how to program my UV-82, was using CHIRP. The first video below lifted my blinders:
https://www.youtube.com/watch?v=CrG0El1KkIMI didn't have to much to start using CHIRP, other than roll back to a previous version of the driver, as advised on MILKOR, but the video below may help you.
https://www.youtube.com/watch?v=jwcgBDI3vToHope that helps you get going.
-baji.
~~ K 8 I I T _
On Sat, Apr 1, 2017 at 7:14 AM, Craig Kalsa wrote:
Hello - I am new to ham radio and studying for my license as a casual user / prepper. I have 2 new 82Ls and have spent a great deal of time trying to find a video on YouTube that can get me up and running in the 28205 / Charlotte area. So far, I have been in Miklor and CHIRP but can't figure out how to find, program and enjoy my radio. I have loaded the correct cable drivers, downloaded my factory image and have found various lists of pubic safety and amateur frequencies; even donated to CHRIP. I want to listen, scan and use as two-way while camping. Is there a good reference, video or otherwise that can help get me up and running? Regards, Craig
_
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Walt Childson at wchildson@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Craig Kalsa at craigkalsa@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to N.C. at mypersonalspamfilternc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
Baji - you and the rest of the community have been very kind, thank you! I am consumed with yard work this weekend but will get time Sunday and the of the week going through all the resources everyone has sent; I am certain it is all in there. After I posted my intiial request, I thought, "how mundane! there must be 50 posts a day like this!" But you have all been generous and supportive. I will remember this when I become an active member and can contribute, too!
On Sat, Apr 1, 2017 at 1:45 PM, Baji Panchumarti ohiobaji@gmail.com wrote:
Craig,
For the longest time, the only way I knew how to program my UV-82, was using CHIRP. The first video below lifted my blinders:
https://www.youtube.com/watch?v=CrG0El1KkIMI didn't have to much to start using CHIRP, other than roll back to a previous version of the driver, as advised on MILKOR, but the video below may help you.
https://www.youtube.com/watch?v=jwcgBDI3vToHope that helps you get going.
-baji.
~~ K 8 I I T _
On Sat, Apr 1, 2017 at 7:14 AM, Craig Kalsa wrote:
Hello - I am new to ham radio and studying for my license as a casual user
/ prepper. I have 2 new 82Ls and have spent a great deal of time trying to find a video on YouTube that can get me up and running in the 28205 / Charlotte area. So far, I have been in Miklor and CHIRP but can't figure out how to find, program and enjoy my radio. I have loaded the correct cable drivers, downloaded my factory image and have found various lists of pubic safety and amateur frequencies; even donated to CHRIP. I want to listen, scan and use as two-way while camping. Is there a good reference, video or otherwise that can help get me up and running? Regards, Craig
_
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Craig Kalsa at craigkalsa@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
participants (4)
-
Baji Panchumarti -
Craig Kalsa -
Nate Alvin -
Walt Childson