Good day. I have the above radio, someone suggested that I go thru Chirp to program my radio. Done fairly well so far, other than my radio is not listed. the 9R is, but no 10R. If there are any 10R users out there, what have you been doing to program? Did you use the 9R interface?
Thanks
Chad,
It should work
https://chirp.danplanet.com/projects/chirp/wiki/Home
- UV-10R *(use BF-F8HP 3 power levels)*
Thanks,
Bob KA1TTG
On Mon, Jul 5, 2021 at 12:37 PM Chad Reed ellesix@gmail.com wrote:
Good day. I have the above radio, someone suggested that I go thru Chirp to program my radio. Done fairly well so far, other than my radio is not listed. the 9R is, but no 10R. If there are any 10R users out there, what have you been doing to program? Did you use the 9R interface?
Thanks
-- Chad A. Reed _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bob at bobank03@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Hi Bob, thanks for the rapid response, i did not see that particular list. I connected my cord in the hopes of getting my current freq's off my radio, and its been stuck on the "cloning" window for about 5 mins now, nothing happening. Is it normal for things to take that long on the first download to your laptop?
On Mon, Jul 5, 2021 at 9:44 AM Robert Ankenbauer bobank03@gmail.com wrote:
Chad,
It should work
https://chirp.danplanet.com/projects/chirp/wiki/Home
- UV-10R *(use BF-F8HP 3 power levels)*
Thanks,
Bob KA1TTG
On Mon, Jul 5, 2021 at 12:37 PM Chad Reed ellesix@gmail.com wrote:
Good day. I have the above radio, someone suggested that I go thru Chirp to program my radio. Done fairly well so far, other than my radio is not listed. the 9R is, but no 10R. If there are any 10R users out there, what have you been doing to program? Did you use the 9R interface?
Thanks
-- Chad A. Reed _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bob at bobank03@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chad at ellesix@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Mon, Jul 5, 2021 at 1:16 PM Chad Reed ellesix@gmail.com wrote:
Hi Bob, thanks for the rapid response, i did not see that particular list. I connected my cord in the hopes of getting my current freq's off my radio, and its been stuck on the "cloning" window for about 5 mins now, nothing happening. Is it normal for things to take that long on the first download to your laptop?
No. This is not normal. It shouldn't take more than 20 seconds to download from your radio into CHIRP.
Jim KC9HI
Crud. Okay, the clone window is still up, nothing is happening. i just found an error message, saying could not open port COM4 (error 5) Access is denied... Suggestions??
On Mon, Jul 5, 2021 at 10:23 AM Jim Unroe rock.unroe@gmail.com wrote:
On Mon, Jul 5, 2021 at 1:16 PM Chad Reed ellesix@gmail.com wrote:
Hi Bob, thanks for the rapid response, i did not see that particular
list. I connected my cord in the hopes of getting my current freq's off my radio, and its been stuck on the "cloning" window for about 5 mins now, nothing happening. Is it normal for things to take that long on the first download to your laptop?
No. This is not normal. It shouldn't take more than 20 seconds to download from your radio into CHIRP.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chad at ellesix@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Gentlemen, looks like I have muscled thru this, managed to get on to the Baofeng website and download cable drivers and installation instructions.
I appreciate your time.
Cheers
On Mon, Jul 5, 2021 at 11:34 AM Chad Reed ellesix@gmail.com wrote:
Crud. Okay, the clone window is still up, nothing is happening. i just found an error message, saying could not open port COM4 (error 5) Access is denied... Suggestions??
On Mon, Jul 5, 2021 at 10:23 AM Jim Unroe rock.unroe@gmail.com wrote:
On Mon, Jul 5, 2021 at 1:16 PM Chad Reed ellesix@gmail.com wrote:
Hi Bob, thanks for the rapid response, i did not see that particular
list. I connected my cord in the hopes of getting my current freq's off my radio, and its been stuck on the "cloning" window for about 5 mins now, nothing happening. Is it normal for things to take that long on the first download to your laptop?
No. This is not normal. It shouldn't take more than 20 seconds to download from your radio into CHIRP.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chad at ellesix@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- Chad A. Reed
If your download is not successful, let me suggest these links.
Miklor.com/COM/UV_ErrorMess.php Miklor.com/COM/UV_Drivers.php
Stay safe and healthy.
John 'Miklor'
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Chad Reed Sent: Monday, July 5, 2021 2:52 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-10R
Gentlemen, looks like I have muscled thru this, managed to get on to the Baofeng website and download cable drivers and installation instructions.
I appreciate your time.
Cheers
On Mon, Jul 5, 2021 at 11:34 AM Chad Reed ellesix@gmail.com wrote:
Crud. Okay, the clone window is still up, nothing is happening. i just found an error message, saying could not open port COM4 (error 5) Access is denied... Suggestions??
On Mon, Jul 5, 2021 at 10:23 AM Jim Unroe rock.unroe@gmail.com wrote:
On Mon, Jul 5, 2021 at 1:16 PM Chad Reed ellesix@gmail.com wrote:
Hi Bob, thanks for the rapid response, i did not see that particular list. I connected my cord in the hopes of getting my current freq's off my radio, and its been stuck on the "cloning" window for about 5 mins now, nothing happening. Is it normal for things to take that long on the first download to your laptop?
No. This is not normal. It shouldn't take more than 20 seconds to download from your radio into CHIRP.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chad at ellesix@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Mon, Jul 5, 2021 at 12:36 PM Chad Reed ellesix@gmail.com wrote:
Good day. I have the above radio, someone suggested that I go thru Chirp to program my radio. Done fairly well so far, other than my radio is not listed. the 9R is, but no 10R. If there are any 10R users out there, what have you been doing to program? Did you use the 9R interface?
Thanks
The Supported Radio Models list on the CHIRP home pages shows...
* UV-10R (use BF-F8HP 3 power levels)
https://chirp.danplanet.com/projects/chirp/wiki/Home
Jim KC9HI
participants (4)
-
Chad Reed -
Jim Unroe -
John La -
Robert Ankenbauer