Hi Bob, thanks for the rapid response, i did not see that particular list. I connected my cord in the hopes of getting my current freq's off my radio, and its been stuck on the "cloning" window for about 5 mins now, nothing happening. Is it normal for things to take that long on the first download to your laptop?

On Mon, Jul 5, 2021 at 9:44 AM Robert Ankenbauer <bobank03@gmail.com> wrote:

Chad,

It should work

https://chirp.danplanet.com/projects/chirp/wiki/Home
UV-10R (use BF-F8HP 3 power levels)
Thanks,

Bob KA1TTG

On Mon, Jul 5, 2021 at 12:37 PM Chad Reed <ellesix@gmail.com> wrote:
Good day. I have the above radio, someone suggested that I go thru Chirp to program my radio. Done fairly well so far, other than my radio is not listed. the 9R is, but no 10R. If there are any 10R users out there, what have you been doing to program? Did you use the 9R interface?

Thanks

--
Chad A. Reed
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Bob at bobank03@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chad at ellesix@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com