Not sure if its permissible to ask a question here. If not, please inform where.
I D/L and used the latest CHIRP to program my Icom IC-2200 as well as a china UV_3V mini HT, both programmed successfully using the driver that came with the USB cable for the IC-2200. In other words, same cable and driver worked ok for both radios..
Next I purchased a cable for my FT-2800 Yaesu but I get a read header error. This cable also came with a driver but an inspection indicates this driver is identical to the prolithic driver on the IC-2200 driver disk. Why dosent it work?
Any advice appreciated...
73, MIKE K5HUM
Next I purchased a cable for my FT-2800 Yaesu but I get a read header error.
Where did you get your cable?
This cable also came with a driver but an inspection indicates this driver is identical to the prolithic driver on the IC-2200 driver disk. Why dosent it work?
Unfortunately, Yaesu radios are not very smart and require you to initiate the clone from the radio side once CHIRP is ready. Are you doing this?
participants (2)
-
Dan Smith
-
Mike Raymond