If it works on one, it should work on both. I would try a few things to diagnose the issue…. Here are some ideas but they might sound strange to you. 1) Does it work on the first radio you try but not the second? 2) Did you verify that the COM port on the cable is correct between radios? 3) May be you need to restart the program between radios and download data then upload on each? 4) Did you reboot your computer between radios and download then upload? 5) No matter what order you try, it is the same radio that has the problem? The answers to these questions might reveal an operation procedure. Or one radio is just really the problem???

John

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Leo Ryan Sent: Tuesday, January 29, 2013 8:51 PM To: Discussion of CHIRP Subject: Re: [chirp_users] CHIRP and the Boafeng UV-5RA

Like I said, it won't upload. Thanks, Leo

On 1/29/2013 7:02 PM, John Gorena wrote: Yes,

Use the latest Daily build. Connect your cable… Receive the data first then upload the changes. You do not have to push buttons to receive or transmit

John

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Tom Reis Sent: Tuesday, January 29, 2013 6:19 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] CHIRP and the Boafeng UV-5RA

Heloo, Has anyone found a way to use CHIRP with the Baofeng UV-5RA? Thanks,

73 Tom, NØVPR

_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users