If it works on one, it should work on both. I would try a few things to diagnose the issue…. Here are some ideas but they might sound strange to you.
1) Does it work on the first radio you try but not the second?
2) Did you verify that the COM port on the cable is correct between radios?
3) May be you need to restart the program between radios and download data then upload on each?
4) Did you reboot your computer between radios and download then upload?
5) No matter what order you try, it is the same radio that has the problem?
The answers to these questions might reveal an operation procedure. Or one radio is just really the problem???
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Leo Ryan
Sent: Tuesday, January 29, 2013 8:51 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] CHIRP and the Boafeng UV-5RA
Like I said, it won't upload.
Thanks, Leo
On 1/29/2013 7:02 PM, John Gorena wrote:
Yes,
Use the latest Daily build. Connect your cable… Receive the data first then upload the changes. You do not have to push buttons to receive or transmit…
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Tom Reis
Sent: Tuesday, January 29, 2013 6:19 PM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] CHIRP and the Boafeng UV-5RA
Heloo,
Has anyone found a way to use CHIRP with the Baofeng UV-5RA?
Thanks,
73
Tom, NØVPR
_______________________________________________chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users