[chirp_users] Windows 11
Stumped. Windows 11 apparently doesn't have the [ports which were in W-10, and it's not intuitive to add new ports. I had been using CHIRP with a Yeasu FT-60R and a Baofeng. Suggestions? *Archie Miller* *w6alm35@gmail.com w6alm35@gmail.com* *www.OrcuttChristian.Org http://www.OrcuttChristian.Org*
Hi Archie, I would open device manager with the cable plugged in, and remove the plug, and see what goes away. HTH. Glenn ----- Original Message ----- From: Archie Miller To: chirp_users@intrepid.danplanet.com Sent: Wednesday, April 05, 2023 12:04 PM Subject: [chirp_users] Windows 11
Stumped. Windows 11 apparently doesn't have the [ports which were in W-10, and it's not intuitive to add new ports. I had been using CHIRP with a Yeasu FT-60R and a Baofeng. Suggestions?
Archie Miller w6alm35@gmail.com www.OrcuttChristian.Org
--------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
On Wed, Apr 5, 2023 at 1:06 PM Archie Miller w6alm35@gmail.com wrote:
Stumped. Windows 11 apparently doesn't have the [ports which were in W-10, and it's not intuitive to add new ports. I had been using CHIRP with a Yeasu FT-60R and a Baofeng. Suggestions?
In this regard, Windows 11 works exactly the same as Windows 10 (and 8, 7, vista, etc). If you have a programming cable with a Prolific type USB-to-Serial chip you must download, install and select the older Prolific v3.2.0.0 device driver.
https://www.miklor.com/COM/UV_Drivers.php
Jim KC9HI
I would suggest junking Windows and replacing it with Ubuntu. It's not to everybody's taste though.
On Wed, 5 Apr 2023 at 19:16, Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Apr 5, 2023 at 1:06 PM Archie Miller w6alm35@gmail.com wrote:
Stumped. Windows 11 apparently doesn't have the [ports which were in
W-10, and it's not intuitive to add new ports. I had been using CHIRP with a Yeasu FT-60R and a Baofeng.
Suggestions?
In this regard, Windows 11 works exactly the same as Windows 10 (and 8, 7, vista, etc). If you have a programming cable with a Prolific type USB-to-Serial chip you must download, install and select the older Prolific v3.2.0.0 device driver.
https://www.miklor.com/COM/UV_Drivers.php
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tony Ling at tonyg7txu@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Thanks Tony and Jim I started using Unix sometime in the 70's. I regret I was not more precise with the problem/ I'm 88 yrs old, have been a ham for over 60 yr\s and a\Extra for over 50. It's sad to see the spirit of ol" Elmer die in our Ham fraternity. But still thankful to see some still have thar willing spirit. THE PROBLEM is this new Dell XPS13 My previous XPS13 listed under Device Manager a category called Ports This new rig does not. Under "System Devices" , then under "Universal Serial Bus Controllers" are 16 "Hubs" Under "System Devices" , there is a "Universal Serial Bus devices" Under "System Devices" , there is a "USB Connector managers" Device Manager dodes not shows "Ports" Yes it is Chirp related, but Chirp is not the problem. *Archie Miller* *w6alm35@gmail.com w6alm35@gmail.com* *www.OrcuttChristian.Org http://www.OrcuttChristian.Org*
On Wed, Apr 5, 2023 at 2:34 PM Tony Ling tonyg7txu@gmail.com wrote:
I would suggest junking Windows and replacing it with Ubuntu. It's not to everybody's taste though.
On Wed, 5 Apr 2023 at 19:16, Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Apr 5, 2023 at 1:06 PM Archie Miller w6alm35@gmail.com wrote:
Stumped. Windows 11 apparently doesn't have the [ports which were in
W-10, and it's not intuitive to add new ports. I had been using CHIRP with a Yeasu FT-60R and a Baofeng.
Suggestions?
In this regard, Windows 11 works exactly the same as Windows 10 (and 8, 7, vista, etc). If you have a programming cable with a Prolific type USB-to-Serial chip you must download, install and select the older Prolific v3.2.0.0 device driver.
https://www.miklor.com/COM/UV_Drivers.php
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tony Ling at tonyg7txu@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to W6ALM at w6alm35@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
participants (5)
-
Archie Miller -
Jim Unroe -
K0LNY_Glenn -
Ken Hansen -
Tony Ling