It seems it is not stressed enough that you must, VERY FIRST THING, download an image of your radio and save it, and lock it down. Use it as a template for everything moving forward. Never save over it, replace and/or delete it.
Maybe getting rid of File /new and only make available download image and open.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
I had to reset my FT-60R. I did write over the original memory download.
I installed the latest Chirp build, and can not download a new memory template.
I tried reinstalling the FTDI USB driver and checked that it is registered in the system. I reinstalled Chirp again with no success.
Any suggestions?
Frank W3MHP
On Sat, Feb 8, 2020, 10:26 AM Dennis Wage dwage@dwage.com wrote:
It seems it is not stressed enough that you must, VERY FIRST THING, download an image of your radio and save it, and lock it down. Use it as a template for everything moving forward. Never save over it, replace and/or delete it.
Maybe getting rid of File /new and only make available download image and open.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Frank Kohn at frank.j.kohn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Yes. Spend the money and use the ADMS software. It works great. Easy to use.
On Feb 9, 2020, at 7:46 PM, Frank Kohn frank.j.kohn@gmail.com wrote:
I had to reset my FT-60R. I did write over the original memory download.
I installed the latest Chirp build, and can not download a new memory template.
I tried reinstalling the FTDI USB driver and checked that it is registered in the system. I reinstalled Chirp again with no success.
Any suggestions?
Frank W3MHP
On Sat, Feb 8, 2020, 10:26 AM Dennis Wage <dwage@dwage.com mailto:dwage@dwage.com> wrote: It seems it is not stressed enough that you must, VERY FIRST THING, download an image of your radio and save it, and lock it down. Use it as a template for everything moving forward. Never save over it, replace and/or delete it.
Maybe getting rid of File /new and only make available download image and open.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 <> Cell (615) 562-5128 <> Home http://hammondb3organ.net http://hammondb3organ.net/ http://overdubs.net http://overdubs.net/ _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Frank Kohn at frank.j.kohn@gmail.com mailto:frank.j.kohn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Mark at kb6kgx@mac.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I’d definitely try the previous CHIRP version that had worked for you. Have you tried that yet?
Dave KG6ZJO
On Feb 9, 2020, at 7:46 PM, Frank Kohn <frank.j.kohn@gmail.com mailto:frank.j.kohn@gmail.com> wrote:
I had to reset my FT-60R. I did write over the original memory download. I installed the latest Chirp build, and can not download a new memory template. I tried reinstalling the FTDI USB driver and checked that it is registered in the system. I reinstalled Chirp again with no success. Any suggestions?
Frank W3MHP
What type of operating system do you use? Windows, Mac, Linux? Linux is the easiest because there is no driver problem for fake USB chips.
Can you undelete your original file that you previously saved? That's an important file.
Regards, David
On Sun, Feb 9, 2020 at 10:46 PM Frank Kohn frank.j.kohn@gmail.com wrote:
I had to reset my FT-60R. I did write over the original memory download.
I installed the latest Chirp build, and can not download a new memory template.
I tried reinstalling the FTDI USB driver and checked that it is registered in the system. I reinstalled Chirp again with no success.
Any suggestions?
Frank W3MHP
On Sat, Feb 8, 2020, 10:26 AM Dennis Wage dwage@dwage.com wrote:
It seems it is not stressed enough that you must, VERY FIRST THING, download an image of your radio and save it, and lock it down. Use it as a template for everything moving forward. Never save over it, replace and/or delete it.
Maybe getting rid of File /new and only make available download image and open.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Frank Kohn at frank.j.kohn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Hi, I have Chirp 20200207 on a Windows platform installed fine and it communicates fine with the USB cable to my Leixen 898s. Now I understand how the clone function works as I've used it with other radios. I understand the radio is supposed to take any changes "live" and I'm not supposed to have to use "upload to radio". What I've noticed is the changes don't get written to the radio. Has the protocol changed as I see the "upload to radio" in the pulldown is not grayed out? Kurt KC9LDH
For those having issues with chirp and all of a sudden it won’t read the radio I found that anti-virus and anti-malware programs sometimes will quarantine the driver software especially if it is of Chinese origin. I usually turn my malware and antivirus off when installing but in some cases had to exclude certain folders and programs in order for it to work.
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Kurt Sent: Monday, February 10, 2020 12:34 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: [chirp_users] Leixen 898S
Hi,
I have Chirp 20200207 on a Windows platform installed fine and it communicates fine with the
USB cable to my Leixen 898s. Now I understand how the clone function works as I've used it
with other radios. I understand the radio is supposed to take any changes "live" and I'm not
supposed to have to use "upload to radio".
What I've noticed is the changes don't get written to the radio. Has the protocol changed as
I see the "upload to radio" in the pulldown is not grayed out?
Kurt KC9LDH
Thanks, I don't have a problem with it reading the 898S, it's just that it doesn't seem to write to the radio consistently. The Leixen software seems to work nominally.There might be an issue in that I took a csv file from another rig and transferred stations to the 898. I had some success but now the rig won't transmit.Gotta see what software switch I have to change. The native software seems to have more options so will work with it for awhile even though I like Chirp a whole lot better. Kurt KC9LDH On Monday, February 10, 2020, 01:07:45 PM CST, phil@goochs.com phil@goochs.com wrote:
For those having issues with chirp and all of a sudden it won’t read the radio I found that anti-virus and anti-malware programs sometimes will quarantine the driver software especially if it is of Chinese origin. I usually turn my malware and antivirus off when installing but in some cases had to exclude certain folders and programs in order for it to work.
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Kurt Sent: Monday, February 10, 2020 12:34 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: [chirp_users] Leixen 898S
Hi,
I have Chirp 20200207 on a Windows platform installed fine and it communicates fine with the
USB cable to my Leixen 898s. Now I understand how the clone function works as I've used it
with other radios. I understand the radio is supposed to take any changes "live" and I'm not
supposed to have to use "upload to radio".
What I've noticed is the changes don't get written to the radio. Has the protocol changed as
I see the "upload to radio" in the pulldown is not grayed out?
Kurt KC9LDH _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Kurt at ksaves2@sbcglobal.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
The 898S won't transmit at all or only on certain channels from a memory slot ? There is a way to specify no transmit on a specific channel, which is what I did for the preprogrammed WX stations. When viewing the list of memories/channels look at the Duplex column. For Simplex it should say '(None)', for no transmit it will say 'off'
Nita WA4VQW
On Tue, Feb 11, 2020 at 11:58 AM Kurt ksaves2@sbcglobal.net wrote:
Thanks,
I don't have a problem with it reading the 898S, it's just that it doesn't seem to write to the radio consistently. The Leixen software seems to work nominally. There might be an issue in that I took a csv file from another rig and transferred stations to the 898. I had some success but now the rig won't transmit. Gotta see what software switch I have to change. The native software seems to have more options so will work with it for awhile even though I like Chirp a whole lot better. Kurt KC9LDH
On Monday, February 10, 2020, 01:07:45 PM CST, phil@goochs.com < phil@goochs.com> wrote:
For those having issues with chirp and all of a sudden it won’t read the radio I found that anti-virus and anti-malware programs sometimes will quarantine the driver software especially if it is of Chinese origin. I usually turn my malware and antivirus off when installing but in some cases had to exclude certain folders and programs in order for it to work.
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> *On Behalf Of *Kurt *Sent:* Monday, February 10, 2020 12:34 PM *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Subject:* [chirp_users] Leixen 898S
Hi,
I have Chirp 20200207 on a Windows platform installed fine and it communicates fine with the
USB cable to my Leixen 898s. Now I understand how the clone function works as I've used it
with other radios. I understand the radio is supposed to take any changes "live" and I'm not
supposed to have to use "upload to radio".
What I've noticed is the changes don't get written to the radio. Has the protocol changed as
I see the "upload to radio" in the pulldown is not grayed out?
Kurt KC9LDH _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Kurt at ksaves2@sbcglobal.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nita Rae at nitagurrl@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Thanks, Will do tonight after work. Kurt KC9LDH On Tuesday, February 11, 2020, 11:08:49 AM CST, Nita S. nitagurrl@gmail.com wrote:
The 898S won't transmit at all or only on certain channels from a memory slot ? There is a way to specify no transmit on a specific channel, which is what I did for the preprogrammed WX stations. When viewing the list of memories/channels look at the Duplex column. For Simplex it should say '(None)', for no transmit it will say 'off' Nita WA4VQW On Tue, Feb 11, 2020 at 11:58 AM Kurt ksaves2@sbcglobal.net wrote:
Thanks, I don't have a problem with it reading the 898S, it's just that it doesn't seem to write to the radio consistently. The Leixen software seems to work nominally.There might be an issue in that I took a csv file from another rig and transferred stations to the 898. I had some success but now the rig won't transmit.Gotta see what software switch I have to change. The native software seems to have more options so will work with it for awhile even though I like Chirp a whole lot better. Kurt KC9LDH On Monday, February 10, 2020, 01:07:45 PM CST, phil@goochs.com phil@goochs.com wrote:
For those having issues with chirp and all of a sudden it won’t read the radio I found that anti-virus and anti-malware programs sometimes will quarantine the driver software especially if it is of Chinese origin. I usually turn my malware and antivirus off when installing but in some cases had to exclude certain folders and programs in order for it to work.
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Kurt Sent: Monday, February 10, 2020 12:34 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: [chirp_users] Leixen 898S
Hi,
I have Chirp 20200207 on a Windows platform installed fine and it communicates fine with the
USB cable to my Leixen 898s. Now I understand how the clone function works as I've used it
with other radios. I understand the radio is supposed to take any changes "live" and I'm not
supposed to have to use "upload to radio".
What I've noticed is the changes don't get written to the radio. Has the protocol changed as
I see the "upload to radio" in the pulldown is not grayed out?
Kurt KC9LDH _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Kurt at ksaves2@sbcglobal.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nita Rae at nitagurrl@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Kurt at ksaves2@sbcglobal.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (9)
-
D.J.J. Ring, Jr.
-
Dave Nathanson
-
Dennis Wage
-
Frank Kohn
-
Kurt
-
Marc Montour
-
Mark Lassman
-
Nita S.
-
phil@goochs.com